[HOUSE BM Co., Ltd.]ORANGE BOOK 2018 새 항목
필터
-
석고판 BDM10022 절단날 BDM-10022
By adding a special limiting blade, excessive cutting into the cutting material is prevented and light cutting is realized.
Cutting board surface paper can be cut cleanly by sharp angle polishing.1 제품을 찾았습니다.
JPY: 2,680
USD: 16.68
-
석고판 BDM12528 절단날 BDM-12528
By adding a special limiting blade, excessive cutting into the cutting material is prevented and light cutting is realized.
Cutting board surface paper can be cut cleanly by sharp angle polishing.1 제품을 찾았습니다.
JPY: 2,750
USD: 17.11
-
석고판 보강 BDMK10035 BDMK-10035
With the finest fine grain chips, it has excellent wear resistance for strengthening and cutting hard boards.
With 6 to 1 set of blades, it has high straightness and cuts 25% up (compared to our company conventional).1 제품을 찾았습니다.
JPY: 3,420
USD: 21.28
-
석고판 보강 BDMK12542 BDMK-12542
With the finest fine grain chips, it has excellent wear resistance for strengthening and cutting hard boards.
With 6 to 1 set of blades, it has high straightness and cuts 25% up (compared to our company conventional).1 제품을 찾았습니다.
JPY: 3,760
USD: 23.40
-
칩 SAWF 또는 Galvalueme 강판 DMG10040 DMG-10040
With a blade thickness of 1 to 2 mm, the cutting speed is fast, and the ultra-fine cermet chip type achieves stable long cuts with little wear.
Employing a deformed embedded tip, it is resistant to blade skipping, prevents excessive cutting with a limiting blade, and allows smooth cutting with little burr even when cutting thin sheet metal.1 제품을 찾았습니다.
JPY: 4,240
USD: 26.38
-
칩 SAWF 또는 Galvalueme 강판 DMG12550 DMG-12550
With a blade thickness of 1 to 2 mm, the cutting speed is fast, and the ultra-fine cermet chip type achieves stable long cuts with little wear.
Employing a deformed embedded tip, it is resistant to blade skipping, prevents excessive cutting with a limiting blade, and allows smooth cutting with little burr even when cutting thin sheet metal.1 제품을 찾았습니다.
JPY: 4,680
USD: 29.12
-
인테리어 칩 SAWF 또는 에나멜 키첸 패널 DMHK10048 DMHK-10048
Because of the use of high-hardness ultra-fine cermet tips, the cut ends will have a beautiful finish.
High precision limiting blade (prevents excessive digging into the material during cutting, prevents fluttering of the panel, and prevents blade chipping) reduces chipping on the cutting surface.1 제품을 찾았습니다.
JPY: 5,280
USD: 32.85
-
인테리어 칩 SAWF 또는 에나멜 키첸 패널 DMHK12560 DMHK-12560
Because of the use of high-hardness ultra-fine cermet tips, the cut ends will have a beautiful finish.
High precision limiting blade (prevents excessive digging into the material during cutting, prevents fluttering of the panel, and prevents blade chipping) reduces chipping on the cutting surface.1 제품을 찾았습니다.
JPY: 5,950
USD: 37.02
-
인테리어 칩 SAWF 또는 에나멜 키첸 패널 DMKP10042 DMKP-10042
Because of the use of a high hardness ultra-fine grain tip, the cut end will have a beautiful finish.
Smooth cutting is possible with thin blade design.1 제품을 찾았습니다.
JPY: 3,500
USD: 21.78
-
인테리어 칩 SAWF 또는 에나멜 키첸 패널 DMKP12556 DMKP-12556
Because of the use of a high hardness ultra-fine grain tip, the cut end will have a beautiful finish.
Smooth cutting is possible with thin blade design.1 제품을 찾았습니다.
JPY: 3,790
USD: 23.58
-
목재용 충전식 칩 JDM10022 JDM-10022
Prevents excessive biting (restricted blade design) and improves straightness.
Blade type and blade thickness design ideal for dust collecting round saw, dust preventing round saw and charging round saw.1 제품을 찾았습니다.
JPY: 2,460
USD: 15.31
-
목재용 충전식 칩 JDM12524 JDM-12524
Prevents excessive biting (restricted blade design) and improves straightness.
Blade type and blade thickness design ideal for dust collecting round saw, dust preventing round saw and charging round saw.1 제품을 찾았습니다.
JPY: 2,530
USD: 15.74
-
목재용 충전식 칩 JDMZ10042 JDMZ-10042
Since the highest quality fine grain tip is used, the cutting edge is sharper and abrasion resistance is improved.
Since the 6-to-1 set of blades (flat blades) is adopted, it has excellent straightness and can cut with high accuracy.1 제품을 찾았습니다.
JPY: 3,500
USD: 21.78
-
목재용 충전식 칩 JDMZ12556 JDMZ-12556
Since the highest quality fine grain tip is used, the cutting edge is sharper and abrasion resistance is improved.
Since the 6-to-1 set of blades (flat blades) is adopted, it has excellent straightness and can cut with high accuracy.1 제품을 찾았습니다.
JPY: 4,160
USD: 25.88
-
Eco-Change 비트 KECAA용 빠른 어댑터 KECA-A
This is a dedicated quick adapter for Eco-change bit replaceable blade type concrete drill.
1 제품을 찾았습니다.
JPY: 1,710
USD: 10.64
-
Eco-Change 비트 KECAB용 빠른 어댑터 KECA-B
This is a dedicated quick adapter for Eco-change bit replaceable blade type concrete drill.
1 제품을 찾았습니다.
JPY: 1,710
USD: 10.64
-
에코-체인지 비트 KECAC용 빠른 어댑터 KECA-C
This is a dedicated quick adapter for Eco-change bit replaceable blade type concrete drill.
1 제품을 찾았습니다.
JPY: 1,710
USD: 10.64
-
［단종］Eco 변경 비트 교체 블레이드(5개) EC3.4 EC-3.4
Eco Change Bit Blade Replacement Type Specialized blade replacement bit for concrete drill.
Replaceable blade type bit for 6.35 shaft type concrete drill.1 제품을 찾았습니다.
JPY: 3,160
USD: 19.66
-
［단종］Eco 변경 비트 교체 블레이드(5개) EC3.5 EC-3.5
Eco Change Bit Blade Replacement Type Specialized blade replacement bit for concrete drill.
Replaceable blade type bit for 6.35 shaft type concrete drill.1 제품을 찾았습니다.
JPY: 3,160
USD: 19.66
-
［단종］Eco 변경 비트 교체 블레이드(5개) EC4.3 EC-4.3
Eco Change Bit Blade Replacement Type Specialized blade replacement bit for concrete drill.
Replaceable blade type bit for 6.35 shaft type concrete drill.1 제품을 찾았습니다.
JPY: 2,750
USD: 17.11
-
［단종］Eco 변경 비트(5개) ECA3.4 ECA-3.4
Replaceable blade type bit for 6.35 shaft type concrete drill.
The replacement blade type is different from the integral concrete drill, so the running cost of replacement is reduced.1 제품을 찾았습니다.
JPY: 4,500
USD: 28.00
-
［단종］Eco 변경 비트(5개) ECA3.5 ECA-3.5
Replaceable blade type bit for 6.35 shaft type concrete drill.
The replacement blade type is different from the integral concrete drill, so the running cost of replacement is reduced.1 제품을 찾았습니다.
JPY: 4,500
USD: 28.00
-
［단종］Eco 변경 비트(5개) ECA4.3 ECA-4.3
Replaceable blade type bit for 6.35 shaft type concrete drill.
The replacement blade type is different from the integral concrete drill, so the running cost of replacement is reduced.1 제품을 찾았습니다.
JPY: 4,500
USD: 28.00
