[SUPER TOOL Co., Ltd.]리프트 클램프/슬링/로딩 머신
필터
-
매달리는 클램프(해제 스토퍼 유형) SVC2
The open stopper mechanism keeps the cam open for easy mounting.
It is easy to check the safety because it cannot be lifted unless the stopper set is removed.1 제품을 찾았습니다.
JPY: 82,200
USD: 515.26
-
-
걸이형 클램프(Lock Lever Type) 리모컨 레버
2 제품을 찾았습니다.
JPY: 47,000-
USD: 294.62-
-
-
수평 걸기 클램프(잠금 핸들, 팁 분할 유형) HLC2U
Ideal for lateral (horizontal) suspension clamps (2-point longitudinal suspension of steel shapes) for structural steel shapes and flat steel plates.
With the spring type tightening lock mechanism, the clamp grips securely even in the no-load condition.1 제품을 찾았습니다.
JPY: 70,490
USD: 441.86
-
수평 수평 항행 클램프(클램프 범위: 0-60mm) HPC3N
Because of the action of the spring, there is no need to hold the clamp by hand when it is attached. Also, the clamp does not come off even in the unloaded state.
A mechanism that increases grip strength more firmly in proportion to lifting load.1 제품을 찾았습니다.
JPY: 50,870
USD: 318.87
-
잔액 LSBN22
This is a new design that enables you to use the head effectively. (H: Head Securing)
It is convenient to adjust the span according to the size and length of the lifting object.1 제품을 찾았습니다.
JPY: 127,670
USD: 800.29
-
스크류 캠 클램프 J 유형 SJC3
It can work reliably from all angles such as lifting, hanging, flipping and pulling.
With the screw cam and arc-shaped cam (special spring type) tightening mechanism, the clamp holds a reliable grip even in a no-load condition and has excellent vibration resistance under load.1 제품을 찾았습니다.
JPY: 39,020
USD: 244.59
-
조절형 스크류 캠 클램프 SUC3.2
The shackle rotates freely 360 degrees in the hanging (pulling) direction, enabling stable angle hanging and extensive pulling work.
As a jig, it is also ideal for hanging chain blocks, hoists, etc., and for pulling steel materials, etc.1 제품을 찾았습니다.
JPY: 57,790
USD: 362.25
-
-
스크류 캠 클램프(더블 I 타입) 트위스트 캠 타입 SDC32S
The operation of the circular cam can be confirmed by the mark. Mark has excellent visibility due to light storage coating.
The circular cam tilts in proportion to the lifting load, and the bite contact surface increases, and it grips firmly.1 제품을 찾았습니다.
JPY: 83,240
USD: 521.78
-
U자형 걸이용 클램프 1t CGC-1000
Switching to open lock is easy with one-touch operation of hook plate.
The cam is extremely durable with a new design that can be used in 4 places by replacement.1 제품을 찾았습니다.
JPY: 70,600
USD: 442.55
-
2x4 패널 매김 밸런스 세트 PTC200S
Two hanging clamps and one compatible balance are set.
The tightening lock can be released by remote control, and dangerous removal work at a height is unnecessary.1 제품을 찾았습니다.
JPY: 101,730
USD: 637.69
-
걸기 후크(표준 유형) 최대 두께 125mm HHC5
The head is roller type to protect the wire rope from damage.
For lifting and transporting all kinds of steel materials.1 제품을 찾았습니다.
JPY: 125,820
USD: 788.69
-
스크류 캠 클램프(더블 I 타입) 트위스트 캠 타입 2t SWC2S
The screw is placed at the top when the horizontal suspension is used, so the tightening work can be done easily. (When it is attached to the upper H steel beam, the tightening work can be done easily as well.)
When the screw is tightened, the circular cam pierces the suspended load while rotating, thereby providing reliable clamping force.1 제품을 찾았습니다.
JPY: 68,100
USD: 426.88
-
Steel Shape Clamp (D1:36 mm) HLC3S
Dedicated hangers for H-shaped, I-shaped, C-shaped, L-shaped and T-shaped steel structures.
Compact and lightweight for easy handling.1 제품을 찾았습니다.
JPY: 50,240
USD: 314.93
-
Horizontal Lifting Clamp (Lock Handle Type/Tip Split Type) HLC3U
Horizontal (horizontal) suspension clamp for structural steel shapes (H-Shaped, I-Shaped, T-Shaped, L-Shaped Steel, etc.) and flat steel plates (ideal type for longitudinal 5-point suspension of steel shapes).
With a spring type tightening lock mechanism, the clamp is a reliable grip even in the no-load state.1 제품을 찾았습니다.
JPY: 87,830
USD: 550.56
-
Panel Lifting Clamp Balance Set PSC100S
Panel Lifting Balance Set
For panel hanging work.1 제품을 찾았습니다.
JPY: 104,490
USD: 654.99
-
Extrusion Molded Plate Hanging Clamp PSC260
Extrusion molded plate suspension clamp.
It can be tightened and unlocked by remote control, eliminating dangerous removal work at high places.1 제품을 찾았습니다.
JPY: 70,080
USD: 439.29
-
Rail Clamp (For 6/9/10 kg Rails) RGC10
Special suspension clamp for railway rails.
Convenient for lifting rails1 제품을 찾았습니다.
JPY: 68,000
USD: 426.25
-
Rail Clamp (For CR100K/101 K Rails) RGC100
Special suspension clamp for railway rails.
Convenient for lifting rails1 제품을 찾았습니다.
JPY: 76,040
USD: 476.65
-
Rail Clamp (For 12/15/22 kg Rails) RGC15
Special suspension clamp for railway rails.
Convenient for lifting rails1 제품을 찾았습니다.
JPY: 68,000
USD: 426.25
-
Rail Clamp (For 50/60 kg, 40/50 kgN Rail) RGC50
Special suspension clamp for railway rails.
Convenient for lifting rails1 제품을 찾았습니다.
JPY: 68,000
USD: 426.25
-
Suspension Clamp for Secondary Concrete Products (Deep Wide Type) SKC1250D
Ideal for lifting and transporting reinforced concrete U-shaped/thick U-shaped/U-shaped flume/concrete products.
It is very useful for hanging sewage manholes.1 제품을 찾았습니다.
JPY: 77,000
USD: 482.67
-
Lifting Clamp (Lock Lever Type) with Remote Control Lever SVC2L
Flat plate inversion work is also possible.
Securely clamps with handle type tightening lock.1 제품을 찾았습니다.
JPY: 93,740
USD: 587.60
-
Lifting Clamp (Release Stopper Type) SVC3
Dedicated to lifting steel and shaped steel.
Its own weight is light and easy to handle.1 제품을 찾았습니다.
JPY: 101,680
USD: 637.37
-
Lifting Clamp (Lock Lever Type) with Remote Control Lever SVC3L
Flat plate inversion work is also possible.
Securely clamps with handle type tightening lock.1 제품을 찾았습니다.
JPY: 116,250
USD: 728.70
-
Lifting Clamp (Release Stopper Type) SVC5
Dedicated to lifting steel and shaped steel.
Its own weight is light and easy to handle.1 제품을 찾았습니다.
JPY: 176,480
USD: 1,106.25
-
Double Lock Type Reinforcement Lifting Clamp (D16~D38) TVC1L3
Safely and securely lifts prefabricated reinforcing bars, deformed steel bars, round bars, etc. in the vertical direction.
The release lock is a center lever type and can be remotely controlled by the rope.1 제품을 찾았습니다.
JPY: 131,270
USD: 822.86
-
Double Lock Type Reinforcement Lifting Clamp (D35~D51) TVC1L5
Safely and securely lifts prefabricated reinforcing bars, deformed steel bars, round bars, etc. in the vertical direction.
The release lock is a center lever type and can be remotely controlled by the rope.1 제품을 찾았습니다.
JPY: 134,950
USD: 845.92
-
ALC Panel Horizontal Lifting Clamp (Grip Width: 450~610 mm) UGC200W
Ideal for lifting and laying ALC floor panels.
For horizontal suspension of ALC floor panels.1 제품을 찾았습니다.
JPY: 77,240
USD: 484.17
-
Super Lock Hook (Capacity: 1 T)
3 제품을 찾았습니다.
JPY: 16,900-
USD: 105.94-
-
Middle Long Plate Full Set (For BUC1000 A) BUF1000A
Part for extending the clamp range.
Increase the clamp range of BUC1000A to 320~600 mm.1 제품을 찾았습니다.
JPY: 99,050
USD: 620.89
-
Horizontal Lifting Clamp (Lock Handle Type) Cross/Flat Type Capacity: 7.0ton Clamp Range: 10~70 mm HLC7H
With locking mechanism for tightening by lock handle.
The grip makes it easy to attach/remove to the workpiece.1 제품을 찾았습니다.
JPY: 191,770
USD: 1,202.09
-
Concrete Lifting Clamp Capacity (kg): 250 Clamp Range (mm): 30~160 Mass (kg): 6
9 제품을 찾았습니다.
JPY: 20,600-
USD: 129.13-
-
U-Shaped Groove Hanger Clamp BUC240N
With U-shaped groove relief holder. (Be sure to use it together with the main body.)
The hoisting tool does not contact the water thread, and there is no need for extra space outside the side ditch.1 제품을 찾았습니다.
JPY: 91,920
USD: 576.19
-
Concrete Lifting Clamp Capacity (kg): 150 Clamp Range (mm): 400~600 Mass (kg): 9
2 제품을 찾았습니다.
JPY: 62,190-
USD: 389.83-
-
Screw Cam Clamp Capacity (ton): 0.5 Clamp Range (mm): 0~25 L (mm): 158
15 제품을 찾았습니다.
JPY: 19,810-
USD: 124.18-
-
-
Form/Panel Lifting Clamp Clamp Range 5 Steps Adjustment (mm): 5~20/20~35/35~50/50~65/65~80 Mass (kg): 1.8
2 제품을 찾았습니다.
JPY: 24,770-
USD: 155.27-

