KYOCERA Corporation

Solid Endmill (2 Blade Medium, 2 FESM, 2.6 × 8mm)

KYOCERA Corporation

솔리드 엔드밀(마감용, 4 블레이드, × 블레이드 길이 2.5mm)

KYOCERA Corporation

솔리드 Endmill (위3 × 블레이드 길이: 3mm)

KYOCERA Corporation

탄화물 반지름 엔드밀(4 블레이드, 코너 반지름: 0.2, 위 3 × 블레이드 길이: 8mm)

KYOCERA Corporation

탄화물 솔리드 엔드밀 (3 개의 블레이드, × 블레이드 길이: 24)

KYOCERA Corporation

탄화물 솔리드 엔드밀 (4 개의 블레이드, 의 길이 : (32)

KYOCERA Corporation

탄화물 솔리드 볼 엔드밀(5개의 블레이드, 중형, 6x블레이드 길이) (45)　5RDSM250-450-25

Sine curve-shaped cutting blade reduces cutting resistance and prevents burglary. Suitable for a wide range of steel, stainless steel and cast iron.
Work Material: Steel, Stainless Steel, Cast Iron.

KYOCERA Corporation

KYOCERA 홀더(소형 공구의 경우 모델 번호: AABSR 1212 JX 40 F)　AABSR1212JX-40F

Rear clamp system.
For rake (outer diameter) processing.

KYOCERA Corporation

KYOCERA 홀더(소형 공구의 경우 모델 번호: ACLCR 1616 JX09FF)　ACLCR1616JX-09FF

Rear clamp system.
For outer diameter and end face machining.

KYOCERA Corporation

KYOCERA 홀더(소형 공구의 경우 모델 번호: ADJCR 1010 JX07FF)　ADJCR1010JX-07FF

Rear clamp system.
For outer diameter and copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: A08XSWUBR0108AE)　A08X-SWUBR08-10AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 10 LSDUCR0714 AE)　A10LSDUCR0714AE

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 10 LSDZCR0714 AE)　A10L-SDZCR07-14AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 10 LSTLCL 1112 AE)　A10L-STLCL11-12AE

Screw clamp system.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 10 LSTLCR 0912 AE)　A10L-STLCR09-12AE

Screw clamp system.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 10 LSTLCR 1112 AE)　A10LSTLCR1112AE

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 10 LSWUBR0812AE)　A10L-SWUBR08-12AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSCLPLPL0814 AE)　A12M-SCLPL08-14AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSDQCR0716 AE)　A12M-SDQCR07-16AE

Screw clamp system.
For copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSDZCR0716 AE)　A12M-SDZCR07-16AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSTLCL 1114 AE)　A12M-STLCL11-14AE

Screw clamp system.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSTLCR 1114 AE)　A12M-STLCR11-14AE

Screw clamp system.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSTLPL 1114 AE)　A12M-STLPL11-14AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSVJCL 0816 AE)　A12M-SVJCL08-16AE

Screw clamp system.
For inner diameter spherical surface, inner end surface and copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSVZCR0816AE)　A12M-SVZCR08-16AE

Dynamic bar that achieves excellent chip discharge.
For pulling.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 12 MSWUPR 1114 AE)　A12M-SWUPR11-14AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSDQCR0720 AE)　A16Q-SDQCR07-20AE

Screw clamp system.
For copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSDUCR0714 AE)　A16Q-SDUCR07-14AE

Dynamic bar that achieves excellent chip discharge.
For copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSDUCR0720 AE)　A16Q-SDUCR07-20AE

Dynamic bar that achieves excellent chip discharge.
For copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSDZCR0714 AE)　A16Q-SDZCR07-14AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSDZCR0720 AE)　A16Q-SDZCR07-20AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: A 16 QSDZCR 1123 AE)　A16Q-SDZCR11-23AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSVJCL 0820 AE)　A16Q-SVJCL08-20AE

Screw clamp system.
For inner diameter spherical surface, inner end surface and copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSVJCR 0820 AE)　A16Q-SVJCR08-20AE

Screw clamp system.
For inner diameter spherical surface, inner end surface and copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSVZBR 1120 AE)　A16Q-SVZBR11-20AE

Dynamic bar that achieves excellent chip discharge.
For pulling.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSWUPR 1118 AE)　A16Q-SWUPR11-18AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 16 QSWUPR 1618 AE)　A16Q-SWUPR16-18AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: 20 RSCLPL0922 AE)　A20RSCLPL0922AE

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: A 20 RSDQCR 1125 AE)　A20R-SDQCR11-25AE

Screw clamp system.
For copying.

KYOCERA Corporation

KYOCERA 홀더(내경 처리, 모델 번호: A 20 RSDUCR 1120 AE)　A20R-SDUCR11-20AE

Dynamic bar that achieves excellent chip discharge.
For copying.