NITTO KOHKI CO., LTD.

69-8614-39　Purge Line Coupler for 3-Branch Piping Brass NBR　RE-PV-30BRASSNBR

기능

Remove residual pressure by operating the lever.
Coupler connection and separation are extremely smooth.
Plug and socket connection is one-touch connection by simply pushing in. It is not affected by the internal pressure of the socket.
Reliable structure with no unpleasant sound or plug recoil caused by air in piping during separation.
The socket valve has a safe design that cannot be opened or closed without a plug.
Even after connection, the valve can be opened and closed by operating the lever, allowing air to flow and shut off freely.
Three air pipes can be taken out simultaneously. (Separate purge high coupler is also available.)

Socket
RE-PV-30 Type (for 3 Branch Piping)
Mass: 1090 g
Maximum working pressure: 1.0 MPa{10kgf/cm2}
Valve structure: One-way switching type
Applicable Fluid: Air
Body Material: Brass (Chrome Plating)
Size
Inlet: R 1/2
Outlet: Socket (PV-30SM)
Withstand Pressure: 1.5 MPa{15kgf/cm2}
Seal Material: Nitrile Rubber (NBR)
Standard Material
Operating temperature range *: -20 to +60°C
*The available temperature range depends on the operating conditions.
Recommended maximum tightening torque: 30 N · m{306kgf · cm}
Fluid Flow Direction: Fluid flows from the inlet to the outlet.
Compatibility
Can be connected to Type 10, Type 17, Type 20, Type 30 and Type 40 of "High Coupler."
These connectors can be used with products from the "High Coupler" and "Nut Coupler" series.
Minimum cross-sectional area: 41 mm2
Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.

주문 번호	69-8614-39
모델 번호	RE-PV-30BRASSNBR
JAN 코드	4992338704889
표준 가격	JPY: 43,300 USD: 271.42 Excange rate 1USD= 159.53JPY Valid price in Japan
수량	1piece
일본의 주식
공급자 재고