사양

• Power Supply Voltage: 24~240 VAC (50/60 Hz), 12~240 VDC (Ripple 20% or less (24 VDC or more can be used up to single-phase full-wave rectifier power supply)
• Allowable voltage variation range: 90~ 110% of rated supply voltage (21.6 ~264 VAC/10.8~264 VDC)
• Power Consumption: Approx. 0.2~4VA/Approx. 0.2~2 W
• Time specification (number of ranges): 7
• Setting time range (range): 0.1~99.9 s, 1~999 s, 0.1~99.9min, 1~999min, 0.1~99.9h, 1~999h, 10~9990h
• Input method: Voltage free input (short circuit/open)
• Output modes: A: On Delay, B: Flicker, C: Signal On/Off Delay, D: Signal Off Delay, E: Interval, F: One-shot Flicker, G: Signal On/Off Delay, H: Signal Off Delay
• Control Output (Contact Output): 1c (Limited Time), Resistance Load: 250 VAC 3 A, Minimum Applicable Load: 5 VDC 10 mA (P level, reference value)
• Recovery method: self-recovery/external recovery
• Power reset: Resume time: 0.5 s or less
• Display method: LCD 3 digits
• Operating Temperature Range: -10~55°C(However, it should not freeze.)
• Operating Humidity Range: 35~85%
• Variation in operating time: ±0.3%±0.05 s or less (percentage of set value)
• Set error: ±0.5%±0.05 s or less (percentage of set value)
• Effect of voltage: ±0.3%±0.05 s or less (percentage of set value)
• Effect of temperature: ±0.3%±0.05 s or less (percentage of set value)
• Insulation Resistance: 100 MΩ or More (at 500 VDC Mega)
• Withstand voltage: between charged metal part and non-charged metal part: 2000 VAC 50/60Hz 1min, between control output and operation circuit: 2000 VAC 50/60Hz 1min, between discontinuous contacts: 1000 VAC 50/60Hz 1min
• Impulse voltage: between power terminals: 5 kV, between conductive terminal and exposed uncharged metal part: 5 kV
• Vibration Resistance: Durability: 10~55 Hz Single Amplitude 0.75 mm 3 Direction 1h Each, Maloperation: 10~55 Hz Single Amplitude 0.5 mm 3 Direction 10min Each
• Shock Resistance: Endurance: 1000 m/s**2, 3 times each in 6 directions, Malfunction: 100 m/s**2, 3 times each in 6 directions
• Life: Electrical: 100,000 times or more (250 VAC 3 A resistance load switching frequency 1800 times/h), Mechanical: 10 million times or more (no load switching frequency 1800 times/h)
• Protection Structure: IP40
• Mounting method: embedded mounting, surface mounting (shared)
• External connection method: 11 pin socket
• Applicable Socket: P2CF-11, P2CF-11-E, P3GA-11, PL11
• Optional Product: Soft Cover: Y92A-48D, Hard Cover: Y92A-48B, Recessed Mounting Adapter: Y92F-30/Y92F-70/Y92F-71
• Weight: about 110 g
•