사양

• Detection Head Size: M8
• Type: Long Body, Cylindrical (Screwed), Unshielded Type
• Type of power supply: DC 3-wire
• Detection distance: 4 mm ±10%
• Setting distance: 0~3.2 mm
• Hysteresis: Less than or equal to 15% of detection distance
• Detectable object: Magnetic metal (detection distance is reduced for non-magnetic metals)
• Standard Detected Object: Iron 12 x 12 x 1 mm
• Response frequency: 1000 Hz
• Supply voltage: 10~30 VDC, including 10% ripple (p-p), Class2
• Current consumption: 16 mA or less
• Control Output (Output Format): PNP Open Collector
• Control output (open/close capacity): 200 mA or less at -40 to +70°C, 100 mA or less at +70 to +85°C
• Control Output (Residual Voltage): 2 V or Less (Load current 200 mA, cord length 2 m)
• Indicator: Standard I/O mode (SIO mode): Operation indicator (orange/lit), Communication indicator (green/unlit)
• Operating mode: NC
• Protection circuits: load short-circuit protection, output reverse connection protection, power reverse connection protection, surge absorption
• Operating Temperature Range: -40~85°C (Do not freeze or dew condense.)
• Storage Temperature Range: – 40~85°C (Do not freeze or dew condense.)
• Operating Humidity Range: 35~95%RH (However, it should not condense.)
• Storage Humidity Range: 35~95%RH (However, it should not condense.)
• Temperature effect: within ±15% of the detection distance at 23°C within the temperature range of -40 °C to +85°C and within ±10% of the detection distance at 23°C within the temperature range of -25 °C to +70°C
• Effect of voltage: within +/- 1% of the detection distance at the rated power supply voltage within +/- 15% of the rated power supply voltage.
• Insulation Resistance: Between Charging Part and Case: 50 MΩ or More (at 500 VDC Mega)
• Withstanding Voltage: Between Charging Part and Case: 1000 VAC 50/60Hz 1min
• Vibration Resistance: Durability: 10~55 Hz Dual Amplitude 1.5 mm X, Y, Z 2h Each Direction
• Shock Resistance: Durability: 500 m/s**2 10 times in each direction X, Y, Z
• Protective structure: IEC: IP67, IP69K (ISO 20653 standard (former DIN standard 40050 PART9))
• Connection method: M8 (4-pin) connector type
• Material: Case: Stainless Steel (SUS303), Detecting Surface: Polybutylene Terephthalate (PBT), Tightening Nut: Brass Nickel Plated, Toothed Washer: Iron Galvanized, Cord: Vinyl Chloride (PVC)
• Accessories: Owner's Manual, Clamping Nuts, Toothed Washer
•