기능

• A repeater that extends the Wi-Fi area by relaying the radio waves of a Wi-Fi router.
• It is also suitable for teleworking and online learning, as it delivers Wi-Fi signal to rooms where Internet connection was difficult.
• This product is suitable for customers who live in houses with rooms that are far away from the Wi-Fi router, or houses that are difficult to transmit Wi-Fi signals such as rebar structures, insulation materials, and floor heating, and who have problems with "Wi-Fi signal does not reach or is difficult to reach."
• The machine can extend the Wi-Fi area of a regular Wi-Fi router using a fixed line or a 5G home router of a carrier equipped with Wi-Fi.
• Wi-Fi 6 enabled more stable high-speed communication.
• It is suitable for telework and online learning as it is strong for simultaneous connection of multiple devices.
• With OFDMA for multi-device connection, 1024QAM for increased transmission information, MU-MIMO for multi-device simultaneous connection, and TWT for long-lasting smartphone battery life, you can achieve stress-free communication even when your family is connected to Wi-Fi.
• Because communication with outbuildings that are not connected to the main house is treated as "outdoor use," conventional products that also use radio waves that are prohibited from outdoor use could violate the Radio Law.
• This product is equipped with "Detached House Mode (patent pending)" which operates only in the radio band approved for outdoor use, and can be used safely in the same environment.
• To connect to the Wi-Fi router (master unit), simply press the WPS button between the master unit and the machine.
• If the product is equipped with WPS, it can be connected to other products.
• * If the machine is not equipped with WPS, you can connect by setting from the management screen of the machine.
• Since the radio wave connection status with the Wi-Fi router (master unit) can be seen when the lamp is lit, you can easily find a suitable installation location without requiring a dedicated application.
• According to the verification of actual data using this product, the communication speed was improved by about 5 times as much as that without a repeater and by about 2.5 times as much as that of the previous standard (WTC-C1167 GC).
• * 5 GHz communication speed with a Wi-Fi router of 11ax2x2 on the 1st floor and the machine installed on the 2nd floor at the furthest point from the 1st floor to the 3rd floor in a 3-story wooden house.
• A repeater is a device that relays radio waves to areas where radio waves do not reach the router, so that they can be brought close to the original communication speed of the line or router.
• Therefore, be aware that the speed cannot exceed the speed of the line or router itself.
• Stylish design that can be inserted directly into wall outlets.
• Since no cable is required for connection, it can be easily installed at a relay point in the house.
• Because of its compact design, it does not block the upper outlet when plugged into the lower side of a typical 2-outlet outlet.
• The 5 GHz band (11ax/ac/n/a) provides stable, low-interference communications at 1201Mbps, while the 2.4 GHz band (11ax/n/g/b) provides high-speed communications at 574Mbps, which is resistant to obstacles such as walls and floors and allows radio waves to reach far distances easily.
• Equipped with a high-power built-in antenna that utilizes the know-how of DX Antenna, a group company, it achieves comfortable communication while looking neat.
• By designing the antenna with particular attention to placement and orientation, it achieves comfortable communication with high sensitivity in all directions without blind spots, and can comfortably connect to smart home appliances (Wi-Fi air conditioners) and IoT terminals by picking up radio waves without leakage.
• With a 1-Gbps LAN port, wired devices such as TVs and recorders can be used as Wi-Fi or Ethernet converters.
• Equipped with band steering function, more comfortable bands (5 GHz/2.4 GHz bands) are automatically selected and connected.
• With "Beamforming Z," which transmits radio waves in a concentrated manner, compatible devices such as iPhone and Android can connect comfortably at a distance.
• With the MU-MIMO function, which can transmit different data to multiple terminals, up to two devices can communicate and process simultaneously if the terminal side supports MU-MIMO.