65-0576-87 개인 유기 신시사이저 화학 주입기 수: 1 ~ 4 PPV-5460
기능
- Adjustable Size for Separable Flasks
- A space-saving synthetic device designed for general liquid-phase organic chemistry experiments. Four types of experiments can be carried out at once by combining the types and sizes of reaction vessels. This enables efficient research on new reactions, development of new catalysts, and examination of reaction conditions. It is equipped with individual temperature control function by aluminum block thermostatic bath and stirring function by strong magnetic force magnetic stirrer.
- The size of the reactor can be changed by replacing the test tube adapter. Experiments can be performed in a wide range of synthetic scales of 11~150 mL. Can be used in combination with a glass reactor and a stainless steel reactor.
- Small separable flasks can also be used. Since it has a large diameter, it can be easily prepared, curetted and washed. You can select from 4 types, size and number of units, depending on the application.
- Each of the four heating blocks is equipped with a temperature sensor and a temperature controller. Temperature control can be started/stopped and temperature can be set for each reactor. Due to the constant flow of cooling water, if the temperature control is stopped after a high temperature reaction, the water will cool down rapidly, making it difficult to overreact.
- Each of the four reactor vessels is equipped with a ferromagnetic driving magnet, which provides strong and reliable stirring. The four driving shafts are controlled by a single motor for stable rotation adjustment from low speed to high speed. Reaction experiments using poorly soluble powder reagents and solid catalysts are also possible.
사양
- 교반 방법: 강자성 자석 교반기
- 성능:
- 반응 용기의 수: 1 ~ 4
- 합성 규모: 11 ~ 150 mL (사용된 반응 용기에 따라 다름) * 반응 용기 관련 부품은 별도로 판매됩니다.
- 온도 제어 범위(알루미늄 블록 온도): - 27 ~ 200C(개별 온도 제어 4배) * 냉각수 순환기가 필요합니다.
- 온도 제어 정확도: 섭씨 +/- 0.5도
- 회전 속도 범위: 50 ~ 900rpm(물 포함)
- 기능:
- 온도 설정 및 표시: 시트 키 입력 및 디지털 디스플레이(- 40.0 ~ 200.0C)
- 교반 설정 및 표시: 볼륨 설정 및 디지털 디스플레이(20 ~ 2000rpm)
- 가스 교체: 진공드로잉 + 불활성 가스 도입(용기에 따라 다름)
- 환류: 지몰트 냉각관을 사용한 고효율 환류
- 시약을 첨가하는 방법: 피펫, 주사기, 낙하 깔때기(수동식 첨가)
- 반응 관찰: 알루미늄 블럭의 슬릿에 의한 것(조명이 있는 것)
- 안전 기능: 누수/과전류 차단기, 온도 퓨즈, 온도 제어기 자체 진단 기능(가변 상온, 고정 상온, 센서 이상), 제상 히터, 이중 챔버, 드롭 트레이, 모터 과부하 보호
- 표준:
- 젖은 부품 재료: 유리, 테프론 ®
- 냉각수 연결 지름: 냉각 카트리지: 외경 12mm 호스 포트
- 가스 연결 보어: 전기 부품 공기 제거: 외경 6mm 원터치 조인트
- 알루미늄 블록 치수: 반응기용 외경 60mm(시험관 어댑터가 설치되지 않은 것으로 한정한다)
- 작동 주변 온도 범위: 섭씨 5 ~ 35도
- 외부 치수(mm)/질량: 475W x 383D x 290H/26kg
- 전원 입력/전압: 13A, 1300VA/AC 100V 50/60Hz
- 구성:
- 반응용기 관련 부분품 : 별도 판매
- 점적 방지 덮개: 제품 코드 번호 228010 (x 4 피스)
- 온도 조절/교반 섹션: PPV- Ctrl1 유형 제품 코드 227230
- *성능은 섭씨 20도에서 측정되며, 정격 공급 전압, 부하가 없으며, 냉각수 순환기(냉각 용량: 330W(섭씨 -30도)
- *온도를 조정하려면 냉각수 순환기 CA -1116 A/1330으로 연결하십시오. -10°C 또는 PFR -1000 + PFP -1000(냉매: 에탄올 -27°C 이상)이 필요합니다.
- *환류를 위해서는 수돗물 또는 냉수 순환기 ACE -2000과의 연결이 필요합니다.
- *시험관 어댑터, 점적 방지 커버, 반응 용기, 교반기 및 기타 부품은 별도로 판매됩니다.
- *매니폴드 PPV 모델 -34 M 제품 코드 번호 228110, 스탠드 장치 제품 코드 번호 228150 및 냉각 호스 세트는 별도로 판매됩니다.
- 액세서리:
- 온도 조절/교반 섹션: 퓨즈 2개
- 코드: 254870
| 주문 번호 | 65-0576-87 | |
|---|---|---|
| 모델 번호 | PPV-5460 | |
| JAN 코드 | 4573528549949 | |
| 표준 가격 |
JPY: 1,407,600
USD: 8,823.42
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 수량 | 1unit | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|







