기능

• EMC Radiation/Noise Resistance: EN61326-1:2006, EN61326-2-3:2006
• LKM S1 Generic Interface, RS Part Number 9130857
• LKM 262 Digital Programmable Measurement Transducer
• LKM 262 is a digital programmable measurement transducer for standard rail mounting applications.　This transducer can be programmed for a variety of thermocouples conforming to DIN EN60584-3 The LKM 262 linearly converts the sensor temperature-dependent thermal voltage to a standard signal.　The signal range is from 0 to 10 V.　Temperature compensation is applied on the measurement transducer itself.　This measurement transducer can be programmed using the generic interface LKM S1 available from RS.　You can make some visual corrections directly using the adjustment controller.
• Input: Thermocouples K, J, L, T, U, E, N, S, B, R, C (corresponding definition ranges) 0: -200 → 600 °C depending on thermocouple * Range: 50 K Linearity error: 0.3 K depending on thermocouple Measurement error: 0.2% Reference junction error: +/- 0.5 °C Supply voltage: 15 → 35 V dc, 15 → 26 V ac (reverse polarity protection) Maximum current consumption: 20 mA Output: 0 → 10 V Programmable sensor damaged: 10 V Short circuit: Voltage value corresponding to room temperature Response time: 0.5 sec TC: 100 ppm/°C Operating temperature range: -40 → 85 °C Moisture: 95% Mounting: 35 mm DIN Rail housing: Polycarbonate 75 x 25 x 53 mm Terminal type: Threaded terminal Clamp range: 0.2 → 2.5 mm2 Approximate weight: 60 g Vibration: 5 g/10 → 200 Hz