SANWA SUPPLY INC.

64-0866-87 2개용 2.5인치 HDD 변환 마운트 TK-HD252

기능

  • Two 2.5 inch SSDs/HDDs can be installed in one 3.5 inch bay at the same time
  • Mounter for fixing 2.5 inch SSDs and HDDs to 3.5 inch bays.
  • Secure your 2.5 inch hard drive to your desktop computer.
  • Fasten a fast 2.5 inch SSD to your desktop.
  • Two 2.5 inch devices of H9.5mm or less can be installed in one 3.5 inch bay.
  • Since it is an integrated mounter, it can be easily and firmly fixed compared to products that combine multiple parts.
  • Corresponds to bottom hole fixing.
  • < Caution > The bay fixing screws are tapping screws and the fixing holes are small diameter. It may not be suitable for cases that are fixed with special screws.
  • * The screw positions for fixing the bays are made based on the screw hole positions of the HDD and FDD. However, in a 3.5 inch bay with few screw holes, there is a possibility that only 1 hole position will match.
  • * 2.5 inch device with old screw position and (screw hole position used until around 1997) is not supported.

사양

  • 크기: 가로 101 x 세로 122 x 두께 25cm
  • 지원되는 드라이브: 2.5인치 HDD, 2.5인치 SSD
  • 액세서리: 4개의 탭 나사, 8mm 나사
  • *상단 스테이지는 H 9.5mm보다 큰 장치를 수용할 수 있지만 3.5인치 이상의 베이 1단계 높이일 수 있습니다.
  • *열이 많이 발생하는 HDD 2개를 설치해 둘 사이에 틈이 없는 경우에는 충분한 방열 조치가 필요하다.
  • *병렬 ATA(IDE) HDD 연결의 경우 TK-AD 40/TK-AD 40 N/TK-KB 40 NR을 사용합니다.
  • *이 제품에는 하드 디스크가 포함되어 있지 않습니다.
  • *이 제품에 연결된 하드 디스크는 어떠한 이유로도 내부 데이터나 하드 디스크를 보증하지 않습니다.
  •  

패키지 크기:105×30×160 mm 70 g  [패키지 크기 정보]

주문 번호 64-0866-87
모델 번호 TK-HD252
JAN 코드 4969887861455
표준 가격 JPY: 1,300 USD: 8.09
Excange rate 1USD= 160.72JPY
Valid price in Japan
수량 1piece
일본의 주식
공급자 재고