기능

• A holder for converting a beam of a stationary laser with a low optical axis to a high optical axis.
• The height of the optical axis of both mirrors can be varied, so they can be used in lasers and optical systems of various heights.
• The length of the pole (PO-20 -***) sold separately can be selected to increase the adjustment range.
• Glue the mirror (φ25 mm or Less, Thickness 5 mm) sold separately to the holder.
• In addition to the optical axis height of the mirror, the position of the mirror (on a circumference with a radius of 50 mm from the pole) and the direction of the mirror can be coarsely adjusted and firmly fixed with a clamp.
• An adjustment screw is attached to the mirror on the exit side to adjust the exit beam angle.
• The picture shows a base plate (BSP-40100), pole (PO-20-200), and 2 mirrors (TFA-30 C05-10).
• A mirror angle adjustment mechanism can also be provided on the holder on the incident side (lower side).
• * Depending on the direction in which the 2 mirrors are reflected, the laser's polarization direction may change by 90 degrees.
• * The top and bottom holders require a clearance height of 127 mm.
• * Select the length of the pole according to the required optical axis height.