AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
연락처
UNION TOOL CO.

61-5350-48　［Discontinued］Carbide End Mill, Radius Taper, 3.5 x Corner R, 0.5 single-sided, 15 degrees　CCRE20350530

기능

  • Radius type end mill for trapezoidal runner processing.
  • The taper half angle is from 7° to 15°, and the corner R is from R0.3 to R2.
  • Use of corner R can contribute to improving the life of the mold.
  • Applicable Work Materials: Carbon Steel, Alloy Steel, Pre-Hardened Steel, Quenched Steel (~55HRC), Cast Iron, Copper
  • Shank Taper Angle is a guide.
  • If you are worried about interference with the work, be sure to check by measuring.

사양

  • Tip diameter (D): 3.5
  • Taper Half-width (A): 15 degrees
  • Corner Radius (R): 0.5
  • Blade length (L): 7.0
  • Total length (L): 60
  • Shank diameter (phi): 8
  • Mass (g): 884
  • Manufactured at factories with ISO 9001 certification
  • Manufactured at factories with ISO 14001 certification
  • UTCOAT: UTCOAT coating
  • Helix angle 30 degrees
  • Radial taper end mill for machining 2-flute trapezoidal runners
  • SuperMG: Ultrafine particle alloy
  • Number of entries: 1
  • Manufacturer's model number: CCRE 20350530
  • Securities Code: 748 -1497
  •  
주문 번호주문 번호ss="init"> ［Discontinued］Carbide End Mill, Radius Taper, 3.5 x Corner R, 0.5 single-sided, 15 degrees　CCRE20350530 61-5350-48 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
UNION TOOL CO.

61-5350-48　［Discontinued］Carbide End Mill, Radius Taper, 3.5 x Corner R, 0.5 single-sided, 15 degrees　CCRE20350530

特徴

  • Radius type end mill for trapezoidal runner processing.
  • The taper half angle is from 7° to 15°, and the corner R is from R0.3 to R2.
  • Use of corner R can contribute to improving the life of the mold.
  • Applicable Work Materials: Carbon Steel, Alloy Steel, Pre-Hardened Steel, Quenched Steel (~55HRC), Cast Iron, Copper
  • Shank Taper Angle is a guide.
  • If you are worried about interference with the work, be sure to check by measuring.

仕様

  • Tip diameter (D): 3.5
  • Taper Half-width (A): 15 degrees
  • Corner Radius (R): 0.5
  • Blade length (L): 7.0
  • Total length (L): 60
  • Shank diameter (phi): 8
  • Mass (g): 884
  • Manufactured at factories with ISO 9001 certification
  • Manufactured at factories with ISO 14001 certification
  • UTCOAT: UTCOAT coating
  • Helix angle 30 degrees
  • Radial taper end mill for machining 2-flute trapezoidal runners
  • SuperMG: Ultrafine particle alloy
  • Number of entries: 1
  • Manufacturer's model number: CCRE 20350530
  • Securities Code: 748 -1497
  •  
주문 번호 61-5350-48
型番 CCRE20350530
JAN 코드 4560295036789
표준 가격 JPY: 12,814 USD: 80.32
Excange rate 1USD= 159.53JPY
Valid price in Japan
수량수량ass="init"> ［Discontinued］Carbide End Mill, Radius Taper, 3.5 x Corner R, 0.5 single-sided, 15 degrees　CCRE20350530 61-5350-48 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
UNION TOOL CO.

61-5350-48　［Discontinued］Carbide End Mill, Radius Taper, 3.5 x Corner R, 0.5 single-sided, 15 degrees　CCRE20350530

特徴

  • Radius type end mill for trapezoidal runner processing.
  • The taper half angle is from 7° to 15°, and the corner R is from R0.3 to R2.
  • Use of corner R can contribute to improving the life of the mold.
  • Applicable Work Materials: Carbon Steel, Alloy Steel, Pre-Hardened Steel, Quenched Steel (~55HRC), Cast Iron, Copper
  • Shank Taper Angle is a guide.
  • If you are worried about interference with the work, be sure to check by measuring.

仕様

  • Tip diameter (D): 3.5
  • Taper Half-width (A): 15 degrees
  • Corner Radius (R): 0.5
  • Blade length (L): 7.0
  • Total length (L): 60
  • Shank diameter (phi): 8
  • Mass (g): 884
  • Manufactured at factories with ISO 9001 certification
  • Manufactured at factories with ISO 14001 certification
  • UTCOAT: UTCOAT coating
  • Helix angle 30 degrees
  • Radial taper end mill for machining 2-flute trapezoidal runners
  • SuperMG: Ultrafine particle alloy
  • Number of entries: 1
  • Manufacturer's model number: CCRE 20350530
  • Securities Code: 748 -1497
  •  
アズワン品番 61-5350-48
型番 CCRE20350530
JANコード 4560295036789
標準価格 JPY: 12,814 USD: 80.32
Excange rate 1USD= 159.53JPY
Valid price in Japan
수량 1piece/pack
  <!--@[ia-1]@-->取扱停止<!--@/[ia-1]@-->
在庫数 -

이 페이지는 AS ONE CORPORATION에서 판매한 ［Discontinued］Carbide End Mill, Radius Taper, 3.5 x Corner R, 0.5 single-sided, 15 degrees의 페이지입니다. 액셀 글로벌은 연구개발, 생산, 반도체, 의료, 간호간호, 식품위생 등 다양한 분야에서 사용되는 제품이 300만개 이상 나열된 웹사이트다.