[TP GIKEN]Alat Pengukur
Filter
- menurut grup Produk
- menurut Produk
Urutkan berdasar:
-
Jenis Kotak Sag Tester (Drooping Tester) JIS Standard 140 x 40 x 30mm
3 produk ditemukan
JPY: 186,000-
USD: 1,165.93-
-
Multi Applicator (Lebar Pelapis 50mm)
3 produk ditemukan
JPY: 285,000-
USD: 1,786.50-
-
Pigmen Perbandingan Tester 500 x 420 x 650mm TP-035
This machine has been developed as a dispersion comparison test machine that is closest to the dispersion principle of Eyeliter sand grind mill.
Pigments, vehicles, and glass beads are prepared in a glass tube, tightly stoppered, and loaded into the unit. When horizontal motion is applied in the longitudinal direction of the tube, the dispersion effect is exerted by the movement and vibration of the glass bead.1 produk ditemukan
JPY: 990,000
USD: 6,205.73
-
Penolakan Abrasi Taber Tester 515 x 310 x 360mm TP-152
This machine is used to measure the degree of wear of surface treatment materials such as coating and plating, plastics, rubber, decorative plywood, fibers, and other materials.
1 produk ditemukan
JPY: 1,250,000
USD: 7,835.52
-
Washing Tester (2 Racks) 480 x 650 x 720mm TP-153
It is an excellent testing machine that performs cleaning resistance tests on paint coatings, plastics, floor materials, and other materials and is manufactured in accordance with JIS standards and the Gardner system.
The specimen surface is reciprocated at constant speed by the prescribed brush to observe the condition of feeding the specimen.1 produk ditemukan
JPY: 1,198,000
USD: 7,509.56
-
Film Friksi Test Mesin 400 x 350 x 600mm TP-154
This machine measures the friction durability of marker pens for metal coatings and stationery by rubbing them with gauze, felt, sand eraser, etc.
1 produk ditemukan
JPY: 824,000
USD: 5,165.17
-
Mesin Uji Erichsen 240 x 480 x 300mm TP-180
This unit measures the coating strength of a painted surface.
The specimen set in the specimen holder is fastened and fixed with a die, and the punch is extruded from the back of the film surface.1 produk ditemukan
JPY: 1,188,000
USD: 7,446.88
-
Piring Suksi 160 x 260 x 50mm TP-201
When the applicator, sag tester, etc., is used to create a constant thickness coating film, the purpose of this system is to create a constant coating film by sucking and adhering the test specimen onto the plate (float glass) to maintain smooth contact.
1 produk ditemukan
JPY: 73,800
USD: 462.61
-
Applicator Film Otomatis (Tipe Juga Digunakan Sebagai Pengisi Bilah) 940 x 540 x 300mm TP-202
This is a test machine that performs optimum coating tests on sheets of paper, metal, film, etc., by setting the coating speed with an applicator or bar coater.
1 produk ditemukan
JPY: 1,370,000
USD: 8,587.73
-
Tipe JIS Tidak Ada Waktu Pengambilan Tester 450 x 400 x 400mm TP-250
This machine measures the drying time of traffic paint. It rolls the machine on the painted surface at a constant speed (passing through the paint film for 1 second) and checks whether the paint film has adhered to the tire of the test roll.
Use the traffic applicator to create a 150 mm wide coating film. Test the film 15 minutes after 1 type, 10 minutes after 2 types, and 3 types after 3 minutes to check for adhesion and reference the no-pickup time.1 produk ditemukan
JPY: 459,000
USD: 2,877.20
-
Mesin Uji Goresan Pensil (Tipe Manual) 150 (130) x 80 x 65mm TP-260
This is a manual pencil scratching tester manufactured in accordance with JIS K-5600 and equipped with the function of a pencil scratching tester.
The hardness and adhesion strength of the coating film are measured by the hardness of the pencil that scratches when the paint or varnish is scratched with a pencil held at a load of 750 g and an angle of 45 degrees.1 produk ditemukan
JPY: 86,700
USD: 543.47
-
Tester Ketahanan Kering TP-261
It is used for a pass/fail test to determine whether a single coating or multilayer coating system of a paint or related product has reached a cured dry state after a specified drying time has elapsed.
It can also be used to measure the time it takes to reach the cured dry state.1 produk ditemukan
JPY: 349,000
USD: 2,187.68
-
Ford Cup Stainless Steel 200 x 180 x 280mm TP-304
This device fills a cup with a sample of paint, varnish, etc., and measures the viscosity easily and quickly by grinding the surface tension with the attached glass plate and the flow time from a fixed orifice.
1 produk ditemukan
JPY: 155,000
USD: 971.60
-
Diameter Orientasi Piala Aliran ISO 3mm 108 mL
4 produk ditemukan
JPY: 86,700-
USD: 543.47-
-
Zahn-Viscosity Piala No1 Orientasi Diameter 2.0mm
5 produk ditemukan
JPY: 24,900-
USD: 156.08-
-
Stormer Viscometer 210 x 210 x 415mm TP-330
Viscosity of paint in a 500 ml sample can is measured in seconds of 100 revolutions by the resistance value of the accurately finished rotor blade.
This is a test machine that measures the time and calculates the KU value by determining the head so that the rotor rotates 100 times in about 30 seconds.1 produk ditemukan
JPY: 568,000
USD: 3,560.46
-
Piala Gravitasi 50mL 45φ x 45mm
2 produk ditemukan
JPY: 64,000-
USD: 401.18-
-
Piala Super Spanyol 410 x 250 x 200mm TP-415
This unit is used to measure the moisture permeability of plastic paper, tarpaulin paper, and other packaging materials.
1 produk ditemukan
JPY: 298,000
USD: 1,867.99
-
Metode Kutu Mesin Pengujian Flex
2 produk ditemukan
JPY: 285,000-
USD: 1,786.50-
-
[Dihentikan]Tipe RC Mengutip Film Waktu Pengukur Tipe I (Pengurutan Ulang Drying) 240 x 500 x 110mm
2 produk ditemukan
JPY: 495,000-
USD: 3,102.87-

