Nakamura Mfg. Co., Ltd. (KANON)

Rentang Pengukuran California Desipita Vernier: 0-100

Nakamura Mfg. Co., Ltd. (KANON)

Digital Pitagis 100 mm with Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Digital Pitanogis 100 mm with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Nilai maksimum Kaliper Digital Pita Vernier, nilai minimum yang ditahan dengan rentang Pengukuran: 0-150

Nakamura Mfg. Co., Ltd. (KANON)

Maximum/Minimum Hold Digital Pitanogis 150 mm with Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Maximum/Minimum Hold Digital Pitanogis 150 mm with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Mengatur atau menurunkan rentang Pengukuran Kaliers Digital: 0-150

Nakamura Mfg. Co., Ltd. (KANON)

Upper and lower limit setting Digital Caliper 150 mm with Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Upper and lower limit setting Digital Caliper 150 mm with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Rentang Pengukuran Kaliper Pita Vernier: 0-100

Nakamura Mfg. Co., Ltd. (KANON)

Pitot Caliper with 100 mm with Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Pita Caliper 100 mm with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Rentang Pengukuran Kalipers Digital: 0-600

Nakamura Mfg. Co., Ltd. (KANON)

Digital Caliper 600 mm with Calibration Certificate　EMA60J

Standard long digital caliper.
For measuring large objects to be measured. (Inside/Outside)

Nakamura Mfg. Co., Ltd. (KANON)

Digital Caliper 600 mm with English Calibration Certificate　EMA60J

Standard long digital caliper.
For measuring large objects to be measured. (Inside/Outside)

Nakamura Mfg. Co., Ltd. (KANON)

Digital Long Simpanan Vernier 0-600

Nakamura Mfg. Co., Ltd. (KANON)

Kedua rentang Pengukuran Kaliper Nozzle bulat: 0-200　RA20

You can measure work that cannot be measured by straight jaw.
For measuring the outside of the constricted area and the inside of the bag hole.

Nakamura Mfg. Co., Ltd. (KANON)

Rentang Pengukuran Kaliper Rulat Digital langsung membaca: 15-150 (atas), 7,5-150 (lebih rendah)

Nakamura Mfg. Co., Ltd. (KANON)

Gambar langsung dari rentang Pengukuran Kaliper Vernier: 20-200　E-ICM20J

Ideal for measuring the inner diameter of grooves in holes.
Direct reading.

Nakamura Mfg. Co., Ltd. (KANON)

Putar-nomor dengan rentang Pengukuran Kaliper Vernier: 0-200　DMK20J

It is a caliper of rack and pinion system.
It has improved impact resistance and can be used safely.

Nakamura Mfg. Co., Ltd. (KANON)

Dial Caliper 200 mm with Calibration Certificate　DMK20J

It is a caliper of rack and pinion system.
It has improved impact resistance and can be used safely.

Nakamura Mfg. Co., Ltd. (KANON)

Dial Caliper 200 mm with English Calibration Certificate　DMK20J

It is a caliper of rack and pinion system.
It has improved impact resistance and can be used safely.

Nakamura Mfg. Co., Ltd. (KANON)

Pengajar rotasi dengan rentang Pengukuran Tinggi Digital: 10-300　EHK30J

Multiple measurements are now possible with a rotating screwdriver.
In addition to height measurement, groove measurement is also available, greatly reducing the measurement time.

Nakamura Mfg. Co., Ltd. (KANON)

Tipe Pengukur Tinggi 3 Rentang pengukuran: 0-300

Nakamura Mfg. Co., Ltd. (KANON)

Rentang Pengukuran Ukur 20mm Sangat tipis Digital: 0-20　E-DP2J

Depth gauge for measuring the depth of ultra-fine holes.
For measuring the depth of ultra-fine holes such as printed circuit boards.

Nakamura Mfg. Co., Ltd. (KANON)

Rentang Pengukuran Pengukur Kepentingan Digital: 0-150

Nakamura Mfg. Co., Ltd. (KANON)

Carl Mar tipe rentang Pengukuran Penyelaman: 0-200　SD20P

It has a wider reference base and can measure depth more stably than a caliper.
Karl Mar type depth gauge with no slight motion feed.

Nakamura Mfg. Co., Ltd. (KANON)

Padatkan transmisi data Nirkabel E-FW Digital　E-FW15

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with Calibration Certificate　EFW15

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Padatkan transmisi data Nirkabel E-FW Digital　E-FW20

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with Calibration Certificate　EFW20

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

2523 Ryba memuat Long Jo-Digital Calipers E-LSM R "2523 Ryba"　E-LSM R20J

The length of the outer jaw is 1/2 or more of the maximum measurement length.
The measurement value of "MIN" is retained, and the measurement value can be read as it is even if the outer jaw is widened after the measurement.

Nakamura Mfg. Co., Ltd. (KANON)

2523 Ryba memuat Long Jo-Digital Calipers E-LSM R "2523 Ryba"　E-LSM R30J

The length of the outer jaw is 1/2 or more of the maximum measurement length.
The measurement value of "MIN" is retained, and the measurement value can be read as it is even if the outer jaw is widened after the measurement.

Nakamura Mfg. Co., Ltd. (KANON)

Fitch RF　E-RF30J

The pitch of round holes and holes can be measured by direct reading.
Excellent way to read a digital display from a bird's-eye view.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with Calibration Certificate　EFW30

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with English Calibration Certificate　EFW30

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

［Dihentikan］Rentang Pengukuran Kalium Digital Vernier: 0-150　E-BL15B

Ideal for measuring outside between grooves in narrow workpieces.
Material is stainless steel (SUS420J2).

Nakamura Mfg. Co., Ltd. (KANON)

［Dihentikan］Paskan rentang Pengukuran Kaliper Fin gar Vernier: 0-150

Nakamura Mfg. Co., Ltd. (KANON)

［Dihentikan］Rentang Pengukuran Kalium Digital Ass Vernier: 0-150