[Unika Company Limited]BUKU ORANYE 2018 ITEM BARU
Filter
- menurut grup Produk
- menurut Produk
Urutkan berdasar:
-
Papan Kunci Bersihkan Paket B-412 (40 Bagian) B-412
Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.1 produk ditemukan
JPY: 1,580
USD: 9.83
-
Steel Screw Value Pack F-425-SV (1000 Potongan) F-425-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 produk ditemukan
JPY: 2,810
USD: 17.48
-
Steel Screw Value Pack F-432-SV (750 Bagian) F-432-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 produk ditemukan
JPY: 2,810
USD: 17.48
-
Steel Screw Value Pack F-545-SV (300 Potongan) F-545-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 produk ditemukan
JPY: 2,810
USD: 17.48
-
Steel Screw Value Pack F-560-SV (250 Bagian) F-560-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 produk ditemukan
JPY: 2,810
USD: 17.48
-
Stainless Steel Screw Dengan B Drill FS-432 (110 Potongan) FS-432B
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 produk ditemukan
JPY: 1,860
USD: 11.57
-
Stainless Steel Screw Tanpa B Drill FS-432DN (110 Potongan) FS-432DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 produk ditemukan
JPY: 1,510
USD: 9.40
-
Stainless Steel Screw Dengan B Drill FS-438B (85 Potongan) FS-438B
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 produk ditemukan
JPY: 1,860
USD: 11.57
-
Stainless Steel Screw Tanpa B Drill FS-438DN (85 Potongan) FS-438DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 produk ditemukan
JPY: 1,510
USD: 9.40
-
Baja Tanpa Stainless Tanpa B Drill FS-545DN (45 potongan) FS-545DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 produk ditemukan
JPY: 1,510
USD: 9.40
-
HSS High Speed Hole (Tanpa Penahan) 12mm HSS-12TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 2,210
USD: 13.75
-
HSS High Speed Hole (Tanpa Penahan) 13mm HSS-13TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 2,210
USD: 13.75
-
HSS High Speed Hole (Tanpa Penahan) 14 mm HSS-14TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 2,210
USD: 13.75
-
HSS High Speed Hole (Tanpa Penahan) 39mm HSS-39TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,330
USD: 26.94
-
HSS High Speed Hole (Tanpa Penahan) 40mm HSS-40TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole (Tanpa Penahan) 41mm HSS-41TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole Melihat (Tanpa Kerah) 42mm HSS-42TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole (Tanpa Penahan) 43mm HSS-43TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole (Tanpa Penahan) 44mm HSS-44TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole (Tanpa Penahan) 45mm HSS-45TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole (Tanpa Penahan) 46 mm HSS-46TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole (Tanpa Kerah) 47 mm HSS-47TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole (Tanpa Penahan) 48mm HSS-48TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole (Tanpa Penahan) 49mm HSS-49TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole (Tanpa Penahan) 50mm HSS-50TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole (Tanpa Penahan) 51mm HSS-51TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole (Tanpa Penahan) 52mm HSS-52TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole (Tanpa Penahan) 53 mm HSS-53TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole (Tanpa Penahan) 54 mm HSS-54TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole (Tanpa Penahan) 55mm HSS-55TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole (Tanpa Penahan) 56mm HSS-56TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole (Tanpa Kerah) 57 mm HSS-57TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole (Tanpa Penahan) 58mm HSS-58TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole (Tanpa Penahan) 59mm HSS-59TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole (Tanpa Penahan) 60mm HSS-60TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 6,880
USD: 42.81
-
HSS High Speed Hole (Tanpa Penahan) 63mm HSS-63TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 6,880
USD: 42.81
-
HSS High Speed Hole (Tanpa Penahan) 65mm HSS-65TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 produk ditemukan
JPY: 7,430
USD: 46.23
-
META-CORE Max 35 Hole Melihat Pin Pusat Standar (IKURA SEIKI) MXCP35-8S
Center pin for Unicameta Core Max.
Work Material: Steel Plate, Shape Steel, Cast Iron Plate, Stainless Steel Plate, etc.1 produk ditemukan
JPY: 1,650
USD: 10.27
-
META-CORE Max 50 Hole Melihat Pin Pusat Standar (IKURA SEIKI) MXCP50-8S
Center pin for Unicameta Core Max.
Work Material: Steel Plate, Shape Steel, Cast Iron Plate, Stainless Steel Plate, etc.1 produk ditemukan
JPY: 1,650
USD: 10.27
-
Steel Screw Silver P-425B-S (200 Potongan) P-425B-S
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 produk ditemukan
JPY: 1,360
USD: 8.46
