HOUSE BM Co., Ltd.

Triple Carbide Hole saw (Long, Φ14mm)

HOUSE BM Co., Ltd.

J-Type Bimetal Hole saw (Φ15mm)

HOUSE BM Co., Ltd.

Hole saw (Alat Listrik Nirkabel, Φ12mm)

HOUSE BM Co., Ltd.

Inti Telusuri (Φ32mm)

HOUSE BM Co., Ltd.

Dia-Core Drill (Seri Naga, Φ29mm)

HOUSE BM Co., Ltd.

Core Drill (Seri Naga Untuk ALC, Φ50mm)

HOUSE BM Co., Ltd.

Inti Bor (Siding, Φ32mm)

HOUSE BM Co., Ltd.

Telusuri Inti (Multi-Gunakan, Φ29mm)

HOUSE BM Co., Ltd.

Lurus Shank (Inti Drill Shank Diameter: 10mm)

HOUSE BM Co., Ltd.

Bor Beton (Sumbu Non-Slip, Alat Getar, 3.0 panjang pedang x 40)

HOUSE BM Co., Ltd.

Bor Beton (Sumbu Non-Slip, Panjang, Alat Getar Φ3.2 Panjang 90)

HOUSE BM Co., Ltd.

Bor (Memutar Getar, Ubin Porselen/Ubin Roofing, 3.0 x dengan panjang Blade 45)

HOUSE BM Co., Ltd.

Bit (J, Sumbu Hex, Alat Listrik yang Dapat Diisi Ulang, Φ2.5 Blade length 45)

HOUSE BM Co., Ltd.

Hemat Sumbu Hex Bor, Tipe Panjang (Panjang total 505 mm x Diameter 10.5 mm)　LD-10.5

Drilling work on concrete, stone blocks, bricks, rocks, etc.

HOUSE BM Co., Ltd.

Bor Beton (5 bagian Diatur) 3.4　AG3.4

Special knurled shaft machining of the shank prevents the slip of the chuck part.
Since the drill can be used to its full potential, it has more than 30% of the performance in terms of sharpness and durability compared to conventional products.

HOUSE BM Co., Ltd.

Bor Beton (5 bagian Diatur) 3.5　AG3.5

Use only for rotation.
The best speed for an electric drill is 800~1200.

HOUSE BM Co., Ltd.

Bor Beton (5 bagian Diatur) 4.3　AG4.3

Use only for rotation.
The best speed for an electric drill is 800~1200.

HOUSE BM Co., Ltd.

Bimetal Hole Melihat Set (Untuk Konstruksi Listrik)　BM2153BF

Thin Steel Conduit Construction Set
Work Material: Iron Plate (Up to 3.2 mm), Metal Siding, Tin, Aluminum Wood, PVC, Thin Stainless Steel (Up to 1.6 mm).

HOUSE BM Co., Ltd.

Set Bimetal (Untuk Konstruksi Perlengkapan)　BM2250BF

Set for Water Works
Work Material: Iron Plate (Up to 3.2 mm), Metal Siding, Tin, Aluminum Wood, PVC, Thin Stainless Steel (Up to 1.6 mm).

HOUSE BM Co., Ltd.

Hole Melihat 100　DG100

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 105　DG105

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 110　DG110

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 120　DG120

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 25　DG25

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 29　DG29

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 32　DG32

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 35　DG35

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 38　DG38

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 40　DG40

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 45　DG45

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 50　DG50

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 55　DG55

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 60　DG60

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 65　DG65

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole Melihat 70　DG70

Drilling of difficult-to-cut materials such as reinforced concrete with your own rotary drill is easy without using water. • The sprayed dragon groove on the outer periphery of the core has a high cutting effect, allowing for speedy drilling.
The sprayed dragon groove has the same diameter as the processing hole, so dust can be discharged without leaving it in the hole.

HOUSE BM Co., Ltd.

Hole 75　DG75

You can drill reinforced concrete with your own rotary drill. Sprayed dragon grooves on the outer periphery of the core body allow for fast drilling with high cutting effect. • Reinforced concrete, heavy block, hard tile, hard ceramic siding • Use a rotary drill.

HOUSE BM Co., Ltd.

Hole Melihat 80　DG80

You can drill reinforced concrete with your own rotary drill. Sprayed dragon grooves on the outer periphery of the core body allow for fast drilling with high cutting effect. • Reinforced concrete, heavy block, hard tile, hard ceramic siding • Use a rotary drill.

HOUSE BM Co., Ltd.

Hole　DH21

This is the industry's first double-edged carbide holsaw.
Spare blade type Holsaw is economical.

HOUSE BM Co., Ltd.

Hole　DH22

This is the industry's first double-edged carbide holsaw.
Spare blade type Holsaw is economical.

HOUSE BM Co., Ltd.

Hole　DH23

This is the industry's first double-edged carbide holsaw.
Spare blade type Holsaw is economical.