65-0571-87 Pengering semprot SD-1010
Fitur
- Check and record data in gram order
- For polymers, pharmaceuticals, organic and inorganic compounds and new materials
- Instant drying for short processing time. No hot load is applied to the sample.
- Since the liquid sample is directly pulverized, there is no need to filter and concentrate the liquid sample as a pre-process or grind the liquid sample as a post-process.
- The sample can be dried in small amounts on the order of grams of solids, making it easy to experiment at the laboratory level.
- Drying air inlet and outlet temperatures and dry air volume are displayed digitally, and a recorder output is also equipped to set, check and record experimental data.
- The nozzle of the spray air line is automatically cleaned by time setting. The clogging of the nozzle of the undiluted line can be eliminated by pressing the needle with your finger. The evaporation tube is equipped with a cleaning port so that crystals and other material adhering to the nozzle tip can be easily removed.
- In order to prevent the accumulation of liquid and the precipitation of samples as much as possible, the layout was designed taking into account the location of the spray nozzle and the locations of the sample stirrer and feed pump.
- To prevent dislodgement or breakage of the feed tube due to clogging of the spray nozzle, the pump has a discharge pressure monitoring function.
- A magnetic stirrer, an inlet (suction) filter and an outlet (air) filter are standard equipment to prevent sample precipitation and separation.
- The equipment can be easily disassembled, cleaned and assembled.
- The data is available on our website.
Spec
- Tipe: Nosel semprot dua cairan
- Kinerja:
- Penguapan air: Max. 1500 mL/h
- Rentang/akurasi suhu: 40 ~ 200 derajat C (suhu inlet), +/- 1 derajat C
- Rentang Penyesuaian Volume Udara Panas: 0,2 ~ 0,75 m3/mnt
- Rentang pengaturan tekanan udara untuk menyemprotkan: 20 ~ 250 kPa (0,2 ~ 2,5 kg/cm 2)
- Rentang laju aliran fluida: 150 ~ 1700 mL/j
- Gambar contoh, kecepatan rotasi dan volume: 100 ~ 1000 rpm 50 mL - 2 L (air)
- Fitur:
- Fitur keselamatan: Alat perlindungan tabung pengapalan, kebocoran/penghancur berlebihan, temperatur tetap berlebihan, alat pelindung pendeteksi panas berlebihan, pengembalian manual apabila terjadi kegagalan daya, fungsi diagnostik mandiri (Suhu normal, aliran udara abnormal, deater yang rusak, tekanan cairan abnormal)
- Semprot fungsi pembersihan saluran udara: Operasi otomatis dengan pengatur waktu interval
- Fungsi aksesori: Semprot tombol ON-OFF
- Keluaran eksternal: 0 ~ 10 mV
- Konfigurasi:
- Pemanas: 3 kW
- Pompa cair: Pompa tabung
- Semprot corong: Nosel dua cairan (diameter dalam lubang nozzle: 0,71 mm)
- Semprot pompa udara: Kompresor udara semprot
- Tabung penguapan: kaca keras
- Bagian siklon: Kaca kasar
- Penampung pemulihan Polandia: Kaca keras (volume 600 mL)
- Pengatur contoh: DC sikat servo daya 6W, magnet kobalt
- Penghambat aksi: komutator blower, Max. 0,75 m3/mnt variabel aliran
- Standar:
- Diameter Tube yang digunakan: diameter dalam 3,15 x diameter luar 5,2 mm
- Diameter koneksi udara untuk menyemprotkan: diameter dalam 4 x diameter 6 mm Union untuk tabung elektronik fleksibel
- Tekanan udara untuk menyemprot: Tekanan 294 kPa (3 kg/cm 2), aliran bunga 25 L/min atau lebih
- Diameter koneksi diperluas: kiri luar diameter 50 mm
- Pengatur waktu interval: MATI atau 1 hingga 20 menit (waktu intermiten otomatis)
- Rentang suhu lingkungan operasi: 5 ~ 35 derajat C
- Dimensi Eksternal (mm)/Massal: 700 W x 620 D x 1500 H/Sekitar 110 kg
- Masukan/tegangan daya: 21 A, 4,2 kVA/200 V AC, satu fase 50/60 Hz
- *Kinerja didasari suhu ruangan 20 derajat Celcius, voltase listrik berperingkat 50 Hz, air bersih dan tabung silikon.
- Plug daya tidak disertakan.
- Aksesori: Diameter dalam tabung Silicone 3.15 mm x diameter 5.2 mm x panjang 2 m (2.5 m), recorder output cord 3 pipa udara diameter 4 mm x diameter 6 mm x panjang 5 m konektor piping udara (1/4 B)
- Kode: 27,5170
Ukuran paket：880×810×1670 mm 150 kg [Tentang Ukuran Paket]
| Perintah No. | 65-0571-87 | |
|---|---|---|
| Model No. | SD-1010 | |
| Kode JAN | 4573528556022 | |
| Harga standar |
JPY: 2,163,000
USD: 13,458.19
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Kuantitas | 1unit | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Produk Terkait
Katalog Produk
| Nama Katalog | Halaman |
|---|---|
| AS ONE Catalog 2023 [Instruments for Laboratory] | 45 |