Fitur

• Protect home audiovisual equipment, shelves, figurines, etc. from impact and vibration.
• Repeatable.
• Ideal for home use such as computers, televisions, audio, bookshelves, cupboards, and figurines.
• Superior low elasticity and stickiness make it suitable for all types of shaking.
• If you peel it off slowly, it will come back clear. If you wash it with water and dry it, you can use it repeatedly.
• Please avoid using this product at temperatures other than room temperature (50°C or higher) as it is a non-combustible material. 1. Remove dust and dirt from the bottom of the fixing device or furniture and the adhesive part of the mounting floor. 2.Peel the rubber off the mount and attach it to the four corners of the bottom. 3.Peel off the protective vinyl on one side and place the device on the placement floor to secure it. * When using this rubber, avoid rubber feet, etc., and be sure to use it on the flat bottom surface. Performance cannot be achieved when only a part of this rubber such as rubber feet is used.
• * Avoid holes for heat dissipation, etc., and stick the rubber where the temperature does not rise.
• * When the height of the rubber foot of the device is 3 mm or more, use two layers of this rubber. If the height of the foot is 7 mm or more, use a plastic plate of suitable thickness between two pieces of rubber.
• * Use the sewing machine so that the load is not applied to only a part of the sewing machine.
• * Remove dirt, dust, wax, etc. from the installation surface before use.
• * Do not use on silicon resin or fluorine processed product since it does not stick.