Fitur

• The hot-melt ST connector has a loss repeatability of 0.2 dB (1000 times) and the > hot-melt SC connector > has a loss repeatability of 0.2 dB (200 times).
• 3M ST/SC/LC Hot-Melt Fiber Optic Connector
• The hot-melt ST/SC/LC fiber optic connector is pre-sealed with adhesive in a PC polished zirconia ceramic ferrule. Can be installed in less time than standard connectors that require adhesive preparation or injection.　The adhesive of this hot-melt ST/SC optical fiber connector can be reapplied, so it can be freely adjusted during assembly.　Hot-melt ST/SC fiber-optic connectors are available in a polishing pack (part number; 267-8122 267-8122), and the polishing film (part number; 267-8144 267-8144), wipe with 1 cloth, and it is ready.　In addition, the polishing pad (part number; 267-8138 267-8138), and an SC hot-melt connector cooling stand (part number; 267-8087 267-8087) are also available.　This hot-melt fiber optic connector supports multimode 125 micron fiber cables up to 3 mm in exterior diameter. Once installed, the assembly is low loss and mechanically stable.　For SC hot-melt connectors, since the body is terminated by the crimping ring of the cable, the part number; You need a crimping tool for 267-8100 267-8100.
• The hot-melt LC/ST/SC fiber connector is pre-sealed with adhesive inside a PC-polished zirconia ceramic ferrule. Can be installed in less time than standard connectors that require adhesive preparation or injection.　Once installed, the assembly is low loss and mechanically stable.