62-6177-21 Poly Cap TF75(0.2 μm, Inlet: 3/8"FNPT, Outlet: 3/8"FNPT)1 Pack (5 Pieces) 2702T
Fitur
- Solvent resistance with PTFE filters
- Recommended for organic solvents and erosive solutions
- Capsule type filters with the smallest pore size (5 types of 0.05, 0.1, 0.2, 0.45, 1.0 μm)
- Sterilization with autoclave or ethylene oxide gas is possible. Integrity testing is possible.
- Note)Only for test and research purposes.
Spec
- Housing: Polypropylene
- Membrane Material: Polytetrafluoroethylene
- vents: inlet side
- Support System: Polypropylene
- Connection Method: Heat Crimping
- Voltage: 0.41 MPa (60psi)
- Filtration direction: with bidirectional support. Only one direction depending on the application due to venting. Reverse filtration is possible only at low pressure.
- Sterilization: Unsterilized/Autoclavable at 121°C for 20 minutes (maximum temperature 132°C). It is possible to autoclave repeatedly, but use at the user's responsibility to avoid cross contamination. Perform the integrity test after autoclaving. Sterilization with ethylene oxide gas is possible.
- Effective Filtration Area: 1,000 cm2
- IPA Bubble Point: > 0.09 MPa (13psi)
- Pore Diameter (μm): 0.2
- Connection Inlet: 3/8 "FNPT
- Connection Outlet: 3/8 "FNPT
- FNPT= Female Thread NPT
Ukuran paket：205×375×85 mm 730 g [Tentang Ukuran Paket]
| Perintah No. | 62-6177-21 | |
|---|---|---|
| Model No. | 2702T | |
| Harga standar |
JPY: 118,200
USD: 735.44
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Kuantitas | 1pack(5pieces) | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|