2-6358-22 Portable pH/ORP Meter Body +KCl Replenishing Electrode (0.75 m Cable) PH92-21-J
Fitur
- The stability judgment function supports accurate measurement.
- Detector can be attached to the main body.
- It is convenient to carry.
- Easy to use with one-touch calibration buttons.
Spec
- Target: Hydrogen ion concentration (pH) or oxidation-reduction potential (ORP) in aqueous solution
- Measuring range: pH/0.00 ~ 14.00 pH, ORP/-2000 ~ 2000 mV, Temperature/0 ~ 80 °C * Detector including detector cable without KCl supplementation. 0 ~ 50 °C when submerging the entire body in water
- Indicated range: pH/-2.00 ~ 16.00 pH, ORP/-2000 ~ 2000 mV (1 decimal place for -999 ~ 999 mV), Temperature/-10.0 ~ 120.0 °C
- Repeatability (simulated input of body only): pH/±0.01 pH ±1 digit, ORP/± 0.3% of reading (± 0.3 mV at – 999.9 ~ 999.9 mV)
- Temperature accuracy: Simulated input of body only/±0.5 °C±1 digit, detector combination/±1.0 °C (0 ~ 70°C), ±1.3 °C (when exceeding 70°C)
- Display: Digital LCD + backlight
- Temperature compensation: automatic, manual
- Calibration: pH/Automatic (NIST, USA: up to 5 points; DIN: up to 6 points), Temperature/Manual (1 point) Function: Simultaneous display of pH or ORP (mV) and liquid temperature, Electrode sensitivity diagnostic function, Stability judgment function, Data memory (500 items)
- Structure: IP67
- Applicable standards: CE, RCM, KC
- Connectable detectors: PH92SN, OR92SN
- Wetted Part Material: pH Detector/KCI Non-Replenished Combined pH Detector: Polypropylene Resin (Detector body and protective cover), Glass (Glass electrode, temperature measuring resistor protective tube), Ceramics (Liquid Contamination), Silicone Rubber (Detector Seal), PVC (Cable), Hard Polyethylene (Grip), Nylon 6 (Cord Bushing), KCI Replenished Combined pH Detector: Polypropylene Resin (Detector body and protective cover), Glass (Glass electrode, temperature measuring resistor protective tube), Ceramics (Liquid Contamination), Silicone Rubber (Detector Seal) ORP Detector/KCI Replenished Combined ORP Detector: Polypropylene Resin (Detector body and protective cover), Glass (Glass electrode, temperature measuring resistor protective tube), Ceramics (Liquid Contamination), Silicone Rubber (Detector Seal), Platinum (Electrode)
- Conductivity of the measuring solution: 50 μS/cm or more
- Ambient temperature: 0 ~ 45 °C
- External Dimensions: Approx. H160 x W80 x D40 mm (Excluding Protrusions)
- Weight: about 230 g(Excluding batteries and detectors)
- Power: Alkaline Batteries (AA x 2), Variable Time Auto Power Off Function (1 to 30 minutes)
- Battery life: Approximately 500 hours
Ukuran paket:280×260×50 mm 900 g [Tentang Ukuran Paket]
| Perintah No. | 2-6358-22 | |
|---|---|---|
| Model No. | PH92-21-J | |
| Harga standar |
JPY: 103,600
USD: 649.86
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Produk Terkait
Katalog Produk
| Nama Katalog | Halaman |
|---|---|
| AS ONE Catalog 2025 [Instruments for Laboratory] | 9999 |

