HOZAN TOOL INDUSTRIAL CO., LTD.

Ball Lace Remover　C-440

Hold the ball race pressed into the fork column at 6 points. Remove without damaging forks and ball laces.
Note:It may not be removable if there is no gap for the blade.

HOZAN TOOL INDUSTRIAL CO., LTD.

Extension Pipe　C-441

Extension Pipe for C-440. Multiple connections can be made to support special fork column lengths.

HOZAN TOOL INDUSTRIAL CO., LTD.

Attachment Kit for C-445　C-446

Attachment Set for C-445. Corresponds to 1 "and 1-1/8" (special).

HOZAN TOOL INDUSTRIAL CO., LTD.

Head one Press-Fitting Tool　C-448

It can press the head one evenly and accurately with a lighter load.
By using the separately sold extension bar, long head tubes can also be used.

HOZAN TOOL INDUSTRIAL CO., LTD.

Bearings for C-448/438　C-448-1

Bearing for C-448 only.
*Can also be used for older C-438 models.

HOZAN TOOL INDUSTRIAL CO., LTD.

Adapter Kit for C-448　C-448-4

Adapter Set for C-448. Dedicated to cartridge Type with bearings press-fitted into head one.
Since the adapter contacts only the head one, no load is applied to the bearing.

HOZAN TOOL INDUSTRIAL CO., LTD.

Extension Bar　C-449

Extension Bar for C-448. Supports long head tubes.

HOZAN TOOL INDUSTRIAL CO., LTD.

Back Spread　C-451

It is a Tool for temporarily expanding the frame, such as removing the hub fixed to the frame, or replacing tires and tubes while the wheel is attached to the frame.
Since the attachment moves according to the angle of the frame, it does not slip and scratch even in sharp angle frames.

HOZAN TOOL INDUSTRIAL CO., LTD.

Start Nut Setter　C-460

Specialized Tool for inserting star fangle nut into fork column. The centering guide allows accurate Setting without distortion.

HOZAN TOOL INDUSTRIAL CO., LTD.

Set Screw 1 Set (5 Pieces)　C-460-1

HOZAN TOOL INDUSTRIAL CO., LTD.

Stepped Wrench Set　C-503

Special wrench for hub ball push and lock nut.
The opening is stepped and can be used in 2 sizes.

HOZAN TOOL INDUSTRIAL CO., LTD.

Hub Cone Wrench and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Small Gear Puller　C-62

Multi-stage free sprocket attachment and detachment tool.

HOZAN TOOL INDUSTRIAL CO., LTD.

Spoke Screw Cutter and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Spoke Screw Cutters Set　C-702-22

Screw Cutter Set for plain spokes.
Uses strong die steel in the roller part and also supports stainless steel spokes.

HOZAN TOOL INDUSTRIAL CO., LTD.

Die Head and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Flap Wheel　C-711

HOZAN TOOL INDUSTRIAL CO., LTD.

tube grinder　C-715

Instead of a grindstone that tends to clog, the use of a Flap Wheel that can always grind on a new surface gives a polished surface without unevenness.
The number of revolutions can be changed in a stepless manner, allowing the Setting to match the operator.

HOZAN TOOL INDUSTRIAL CO., LTD.

Repair Stand　C-751

Maintenance stand for bicycle with lifting device.
Suitable for bicycles up to 50 kg, even heavy bicycles such as electric assist bicycles can be lifted with light force for comfortable maintenance.

HOZAN TOOL INDUSTRIAL CO., LTD.

C-Ring Toolkit　C-85

Tool kit for attaching and detaching sprocket fixing C-rings used for interior hubs and rear wheels of general vehicles.
Hard C-rings can be easily and reliably installed.

HOZAN TOOL INDUSTRIAL CO., LTD.

Screw Pliers　P-213B

Dedicated pliers for removing small screws that have been licked or rusted out.
Hold the head of the pan head or truss screw firmly and turn the screw.

ParkTool

Primer　AP-1

Apply before using TLR-1/2 and RC-1 to prepare the surface for maximum performance.
*Be sure to use it on carbon materials. (It is strongly recommended to use for materials other than carbon.)

HOZAN TOOL INDUSTRIAL CO., LTD.

Bolt Set　C-203-1

HOZAN TOOL INDUSTRIAL CO., LTD.

Head Lock Ring Turning 3-Groove Type　C-209

For replacing handle lock parts
One Unit Supports Octagonal Bag Nuts and Three-Groove Lock Rings

HOZAN TOOL INDUSTRIAL CO., LTD.

Center Bolt and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Mounting Bolt Set　C-336-1

HOZAN TOOL INDUSTRIAL CO., LTD.

Spring　C-356-1

HOZAN TOOL INDUSTRIAL CO., LTD.

Cup Holder　C-358-1

HOZAN TOOL INDUSTRIAL CO., LTD.

Pedal taps, left and right pair　C-401-B

Tap for correcting thread of pedal mounting hole of crank.
Standard screws are BC9/16 (C-401), and thin shafts such as children's cars and BMX are BC1/2 (C-401 B).

HOZAN TOOL INDUSTRIAL CO., LTD.

Chuck and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Attachment Stopper and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Pad 4 Pieces and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Spring　C-62-1

HOZAN TOOL INDUSTRIAL CO., LTD.

Spoke Tension Meter with simple checker　C-738

Spoke Tension Meter with digital display.
Supports various spoke shapes such as stepped and flat.

HOZAN TOOL INDUSTRIAL CO., LTD.

Sliding T Handle Torx Type Wrench Set w/Wrench Holder 8-piece Set　THT-1

Professional torque Type wrench Set designed for bicycle maintenance.
High-precision model with excellent work speed and work efficiency.

Fujiwara Sangyo Co., Ltd.

Air Chuck French, English and American Type Compatible G1/4 Screw Type and others

FURUPLA CO., LTD.

Diamond Pump Handy 40 cm BP Red and others

TOYO SAFETY

Bicycle Helmet L Size　NO.530-L

Bicycle helmet with ventilation holes.
for school use

TOYO SAFETY

Bicycle Helmet LL Size　NO.530-LL

Bicycle helmet with ventilation holes.
for school use

TOYO SAFETY

Bicycle Helmet M Size　NO.530-M

Bicycle helmet with ventilation holes.
for school use