絞り込み条件
全て解除
解除
Sensors & Transducers[5]
Fluid Control Systems[23]
Sort by:
Rosemount
Rosemount 2110 Vibrating Level Switch. Rosemount 2110, Compact Vibrating Fork Liquid Level Switch The Rosemount 2110 is a compact model, particularly suitable for installation in small vessels or pipes and high volume OEM applications. When used as a low level alarm, the liquid in the tank or pipe drains down past the fork, causing a change of natural frequency that is detected by the electronics and switches the output state. When used as a high level alarm, the liquid rises in the tank or pipe, making contact with the fork which then causes the output state to switch. Compact and lightweight design Industry standard DIN 43650 plug/socket for fast wiring connections Magnetic test point makes functional test easy Heartbeat LED provides visual indication of instrument health
1 products found
JPY: 179,000
USD: 1,122.82
JPY: 66,800
USD: 419.02
Rosemount 2120 Vibrating Level Switch. The 2120 is a popular choice for its simplicity, ease-of-use, and reliability, in high and low level alarm applications. When used as a low level alarm, the liquid in the tank or pipe drains down past the fork, causing a change of natural frequency that is detected by the electronics and switches the output state. When used as a high level alarm, the liquid rises in the tank or pipe, making contact with the fork which then causes the output state to switch. 8/16 mA ( ‘Off ‘/ ‘On ‘), Direct Load, PNP, Relay, or NAMUR switched output electronics (depending on version) Threaded process connection for side, top, or bottom mounting 2 off M20 conduit entries for supplied cable gland and blanking plug (cable not supplied) Easy selection of Dry ‘On ‘ or Wet ‘On ‘ Mode and Switching Delay Magnetic test point makes functional test easy
JPY: 140,000
USD: 878.18
JPY: 160,000
USD: 1,003.64
JPY: 188,000
USD: 1,179.28
JPY: 150,000
USD: 940.91
JPY: 255,000
USD: 1,599.55
Rosemount 2160 Vibrating Level Switch. Rosemount's 2160 vibrating level switch with wireless technology. Powered by a replaceable power module and with all he the features and benefits of Rosemount's wired point level measuring technology the2160 level switch is ideal for locations and applications that were too costly or inaccessible using wired. Vibrating level sensors work on the principle of a tuning fork to deliver accurate and reliable level measurement unaffected by turbulence, foam, vibration, solids content, coating products, and liquid properties. The switches forks are oscillated at their natural frequency using a piezo- electric crystal. When forks come into contact with a fluid the oscillating frequency change that occurs is detected by the 2160 level switch and causes a change in output state. The 2160 vibrating level sensor is simple to install and requires no calibration or maintenance. Internal diagnostics and LCD lights give a visual indication of the unit ‘s operational status and health and a magnetic test point allow for easy functionality. Features ; Benefits. Designed for temperatures from –40 to 150 °C Electronic self-checking and condition monitoring, and alerts using a field communicator or AMS Software adjustable switching delay prevents false switching in turbulent or splashing applications Wireless and encrypted digital communication of the switch output state and other variables Fast Drip ‘ fork design gives quicker response time Fork shape is optimized for hand polishing to meet hygienic requirements No moving parts or crevices for virtually no maintenance
JPY: 860,000
USD: 5,394.56
JPY: 1,177,000
USD: 7,383.01
JPY: 163,000
USD: 1,022.46
Rosemount 2130 Vibrating Level Switch. Rosemount ‘s 2130 vibrating level sensors work on the principle of a tuning fork to deliver accurate and reliable level measurement unaffected by turbulence, foam, vibration, solids content, coating products, and liquid properties. The switches forks are oscillated at their natural frequency using a piezo- electric crystal. When forks come into contact with a fluid the oscillating frequency change that occurs is detected by the 2130 level switch and causes a change in output state. The 2130 vibrating level sensor is simple to install and requires no calibration or maintenance. Internal diagnostics and LCD lights give a visual indication of the unit ‘s operational status and health and a magnetic test point allow for easy functionality checking. Features ; Benefits. Designed for operation in process temperatures from –40 to 180 °C Adjustable switching delay prevents false switching in turbulent or splashing applications ‘Fast Drip ‘ fork design gives quicker response time when mounted horizontally, especially with viscous liquids Rapid wet-to-dry time for highly responsive switching Fork shape is optimized for hand polishing to meet hygienic requirements No moving parts or crevices for virtually no maintenance Built-in diagnostics continuously check electronic and mechanical health Fork conditions detected including internal and external damage, coated or blocked, and extreme corrosion Ideal for critical alarm duties. Applications. Overfill protection High and low level alarms Pump control or limit detection Run dry or pump protection Hygienic applications High temperature applications
JPY: 263,000
USD: 1,649.73
JPY: 303,000
USD: 1,900.64
3301 Standard Guided Wave Radar. Emerson ‘s 3300 series of guided wave transmitters are suitable for both level and interface measurement delivering accurate results with minimal maintenance and calibration requirements. Utilising guided wave measurement technology the 3301 can be used in applications where both vapour and turbulence are present and does not require compensation for changes in temperature, density or pressure and can be installed in most level and liquid storage applications including those with small tanks, obstructions and difficult storage vessel geometry. Features and Benfits. Advanced signal processing for reliable measurement Unaffected by the mechanical configuration of the chamber Adjustments without opening tank User-friendly software provides easy on-line troubleshooting with echo curve tool and logging Seamless system integration with HART, Modbus®, or IEC 62591 (WirelessHART®) Leakage prevention and reliable performance under challenging conditions Detachable transmitter head allows tank to remain sealed Dual Compartment housing separates cable connections and electronics Easy installation and plant integration
JPY: 891,000
USD: 5,589.01
5301 Enhanced Guided Wave Radar. Emerson ‘s 5300 series of high performance guided wave transmitters are suitable for both level and interface measurement delivering accurate results with minimal maintenance and calibration requirements. Utilising guided wave measurement technology the 5301 can be used in applications where both vapour and turbulence are present and does not require compensation for changes in temperature, density or pressure and can be installed in most level and liquid storage applications including those with small tanks, obstructions and difficult storage vessel geometry. Features and Benefits. Unique Direct Switch Technology and Probe End Projection improve capability and reliability particularly in challenging applications Single lead probe for long measuring ranges, obstructions and low dielectrics ensures reliability in more applications, such as viscous media Smart Galvanic Interface results in a more stable microwave and EMI performance with minimized effects from outside disturbances Heavy-duty unique hardware for extreme temperature and pressures with multiple layers of protection EchoLogics and smart software functions provide enhanced ability to keep track of the surface and detect a full vessel situation Third party approved for overfill prevention and Safety Integrated System SIL3 suitability Electronics and cable connections in separate compartments provides safer handling and improved moisture protection Online device verification and reliable detection of high level conditions with the verification reflector
JPY: 1,108,000
USD: 6,950.19
Temperature Sensor - 3100 Series Ultrasonic Radar. Remote temperature sensor to improve accuracy for Rosemount 3102 and 3105 Ultrasonic Level Transmitters installations where the built-in temperature sensor is not representative of the air/medium temperature. 316 Stainless Steel 2 off locknuts with M8 thread 6mm maximum panel thickness Sensor working temperature -40 to 85 °C Cable is 5 metres long, single twisted pair Cable working temperature -20 to 80 °C
JPY: 20,400
USD: 127.96
3100 Series Mounting ; Accessories. A selection of essential accessories for Emerson's 3100 series ultrasonic level transmitters including submersion shields and mounting flanges and brackets. .
JPY: 53,600
USD: 336.22
JPY: 12,100
USD: 75.90
JPY: 22,300
USD: 139.88
JPY: 6,920
USD: 43.41
Rosemount 3100 Series Mounting Bracket. The bracket kit contains a stainless steel angle bracket and PVC threaded disc for mounting the Rosemount 3101, 3102, or 3105 Ultrasonic Level Transmitter on a structure over the liquid surface.
JPY: 13,900
USD: 87.19
3107 Ultrasonic Level Transmitter. Emersons 3107 level transmitter uses ultrasonic pulse signal measurement to accurately determine liquid levels in broad range of applications. Constructed from tough UPVC and requiring minimal maintenance or installation time the 3107 ultrasonic level transmitter is ideally suited to harsh and exposed environments such as reservoirs, rivers, remote works, and effluent treatment plants. A choice of signal output is available either as a 4-20mA signal or using HART protocol with an internal sensor compensating for temperature effects to maintain accuracy. Features ; Benefits. Low cost of installation and commissioning Non-contacting measurement with no moving parts Corrosion resistant UPVC wetted material Factory fitted with up to 164 ft. (50 m) of two-core cable 4–20 mA loop-powered Operating range to 39 ft. (12 m). Applications. Storage tank levels Open channel flow Effluent pits Reservoir level Buffer tanks Filter bed level
JPY: 85,600
USD: 536.95
3108 Ultrasonic Flow Transmitter. Emersons 3108 flow transmitter uses ultrasonic pulse signal measurement to accurately determine liquid levels in broad range of applications. Constructed from tough UPVC and requiring minimal maintenance or installation time the 3108 ultrasonic flow transmitter is ideally suited to harsh and exposed environments such as reservoirs, rivers, remote works, and effluent treatment plants. A choice of signal output is available either as a 4-20mA signal or using HART protocol. The 3108 features an remote temperature sensor with an internal sensor compensating for temperature effects to maintain accuracy. Features ; Benefits. Low cost of installation and commissioning Non-contacting measurement with no moving parts Corrosion resistant UPVC wetted material Factory fitted with up to 164 ft. (50 m) of two-core cable 4–20 mA loop-powered Operating range to 39 ft. (12 m). Applications. Storage tank levels Open channel flow Effluent pits Reservoir level Buffer tanks Filter bed level
JPY: 121,000
USD: 759.00
JPY: 173,000
USD: 1,085.18
The 3101/3102/3105 Ultrasonic Level transmitters should not be mounted directly to metal. It is highly recommended to use Rosemount mounting flanges. Rosemount 3102 Ultrasonic Liquid Level Transmitter. The Rosemount 3102 uses ultrasonic technology to continuously measure liquid levels in a variety of industrial and water applications including storage tanks, effluent pits, reservoirs, and filter bed levels. Measures liquid level from 0.3 to 11 metres Volume or open channel flow can be calculated. Glass-filled nylon housing with PVDF wet-side 2 BSPT thread for mounting 2 M20 conduit entries with nylon cable glands 2-wire 24V direct current loop-powered (external power supply is required) 4-20mA and digital HART outputs 2 off integral signal relays Integral push-buttons for menu system navigation and application set-up Integral LCD display of metric/imperial measurements and for menu system Low cost of installation/commissioning and minimal maintenance cost
JPY: 120,000
USD: 752.73
The 3101/3102/3105 Ultrasonic Level transmitters should not be mounted directly to metal. It is highly recommended to use Rosemount mounting flanges. Rosemount 3105 Ultrasonic Level Transmitter. The Rosemount 3105 uses ultrasonic technology to continuously measure liquid levels in a variety of industrial and water applications including storage tanks, effluent pits, reservoirs, and filter bed levels. Measures liquid level from 0.3 to 11 metres Volume or open channel flow can be calculated. Glass-filled nylon housing with PVDF wet-side 2 BSPT threaded process connection M20 x 1.5 conduit entries (2 off) for cable glands 2-wire 24V direct current loop-powered (external power supply is required) 4-20mA and digital HART outputs Integral push-buttons for menu system navigation and application set-up Integral LCD display of metric/imperial measurements and for menu system Low cost of installation/commissioning and minimal maintenance cost Intrinsically safe approvals for hazardous (safe) area installation. Features and Benefits. Eliminates problems experienced with contacting instrumentation Simple set-up and operation with an integral LCD display and buttons Low cost of installation and commissioning. Minimal maintenance after installed Process downtime minimized Non-contacting measurement with no moving parts Two integral signal relays (on the Rosemount 3102 only) Corrosion resistant PVDF wetted material Two-wire 24 V direct current loop-powered Operating range up to 36 ft. (11 m) Automatic temperature compensation. Application Examples. Storage tank levels Open channel flow Effluent pits Reservoir level Buffer tanks
JPY: 128,000
USD: 802.91
The 3101/3102/3105 Ultrasonic Level transmitters should not be mounted directly to metal. It is highly recommended to use Rosemount mounting flanges. Rosemount 3101 Ultrasonic Liquid Level Transmitter. The Rosemount 3101 uses ultrasonic technology to continuously measure liquid levels in a variety of industrial and water applications including storage tanks, effluent pits, reservoirs, and filter bed levels. Measures level from 0.3 to 8 metres Glass-filled nylon housing with PVDF wet-side 2 BSPT thread for mounting 2 M20 conduit entries with nylon cable glands 2-wire 24V direct current loop-powered (external power supply is required) 4-20mA output of level Integral push-buttons for menu navigation and application set-up Integral LCD for display of metric/imperial measurements and for menu system Low cost of installation/commissioning and minimal maintenance cost
JPY: 103,000
USD: 646.09
3490 Series Controller. Available either for wall or panel mounting, Rosemount's 3490 series control units are designed for use with any 4-20mA or HART protocol level or flow transmitter. Easy to understand menus and a 'programming wizard' function make programming easy while password protection protect from accidental or unauthorised changes. Features ; Benefits. Tough weatherproof wall mount enclosure for internal and external mounting Accepts 4–20 mA or HART inputs. Compatible with HART 5, 6, and 7 Transmitters Five voltage-free SPDT relays for alarm and control duties Supports two voltage-free contact closure inputs 4–20 mA 12-bit isolated current output proportional to calculated value Bright local display of measured value and input/output status Pre-programmed tank shapes, flow algorithms, and control routines simplify configuration. A 20-point strapping table facility is provided for non-standard applications Real-time clock for energy saving routines, pump efficiency calculations, and date/time stamping of data logging
JPY: 312,000
USD: 1,957.09
