[Valsteam ADCA]Plumbing & Pipeline
Filters
-
Valsteam ADCA 8 bar Iron Inverted Bucket Steam Trap, 1/2 in BSP Female 445621
RS Pro Inverted Bucket Steam Trap IB12. These inverted bucket steam traps are recommended when the most important requirements are overall operating efficiency and trouble free service life. They are best suited for service at medium and high steam pressure due to operating intermittently, either wide open or tightly closed. Features and Benefits. Connections are female screw Horizontal installation Intermittent discharge Discharges condensate at steam temperature Unaffected by water hammer and vibrations Easy to maintain Built-in strainer
1 products found
JPY: 69,800
USD: 437.54
-
Valsteam ADCA Air Vent 345063 1/2 in, 1/8 in 345063
Vertical installation angled connection. Vacuum Breaker. The VB21 vacuum breakers are simple and reliable devices that automatically relieve or "break" an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc. Connections are female screwed
1 products found
JPY: 39,600
USD: 248.23
-
Valsteam ADCA Air Vent AE16SS12 1/2 in AE16SS12
It must be installed absolutely vertically at the points in the plant where the air tends to collect. The drain should be piped to a safe position. Air Eliminator for Water Systems. The AE16SS stainless steel air eliminator removes air from HVAC systems and is also suitable for non corrosive and/or dangerous liquids providing that their specific weight is not less than 0,75Kg/dm3. This ball float type automatic air eliminator can be used in combination with other air elimination and separation systems or directly applied at high points in the piping. Connections are female screwed Vertical installation Corrosion-resistant Replaceable internal parts Cold and hot water systems
1 products found
JPY: 70,000
USD: 438.79
-
Tosaca 1216FML 4bar Pressure Relief Valve With BSP 1/2 in BSP Connection and a BSP 3/4 Exhaust Port 482855
1216FML Safety and Relief Valve. Applications: Steam Min. Set pressure 0.2 barg Overpressure 10% Blowdown Gases 10%, liquids 20% Connections: Threaded BSP / NPT Discharge coefficients k: 0.55 for gases, k: 0.48 for liquids Design EN-12516-1, EN-4126-1/7 DIN 259 and ANSI B2.1 Rating PN-40 Material Stainless steel 316L Materials EN Temperature range -10 → +350ﾟC Inspection EN-4126-1/7
1 products found
JPY: 74,300
USD: 465.74
-
Tosaca 1216FML 2.5bar Pressure Relief Valve with BSP 1/2 in BSP Connection and a BSP 3/4 Exhaust Port 482853
1216FML Safety and Relief Valve. Applications: Steam Min. Set pressure 0.2 barg Overpressure 10% Blowdown Gases 10%, liquids 20% Connections: Threaded BSP / NPT Discharge coefficients k: 0.55 for gases, k: 0.48 for liquids Design EN-12516-1, EN-4126-1/7 DIN 259 and ANSI B2.1 Rating PN-40 Material Stainless steel 316L Materials EN Temperature range -10 → +350ﾟC Inspection EN-4126-1/7
1 products found
JPY: 74,300
USD: 465.74
-
Tosaca 1216FML 3bar Pressure Relief Valve With BSP 3/4 in BSP Connection and a BSP 1 Exhaust Port 482857
1216FML Safety and Relief Valve. Applications: Steam Min. Set pressure 0.2 barg Overpressure 10% Blowdown Gases 10%, liquids 20% Connections: Threaded BSP / NPT Discharge coefficients k: 0.55 for gases, k: 0.48 for liquids Design EN-12516-1, EN-4126-1/7 DIN 259 and ANSI B2.1 Rating PN-40 Material Stainless steel 316L Materials EN Temperature range -10 → +350ﾟC Inspection EN-4126-1/7
1 products found
JPY: 82,300
USD: 515.89
-
Tosaca 1216FML 4bar Pressure Relief Valve With BSP 3/4 in BSP Connection and a BSP 1 Exhaust Port 482858
1216FML Safety and Relief Valve. Applications: Steam Min. Set pressure 0.2 barg Overpressure 10% Blowdown Gases 10%, liquids 20% Connections: Threaded BSP / NPT Discharge coefficients k: 0.55 for gases, k: 0.48 for liquids Design EN-12516-1, EN-4126-1/7 DIN 259 and ANSI B2.1 Rating PN-40 Material Stainless steel 316L Materials EN Temperature range -10 → +350ﾟC Inspection EN-4126-1/7
1 products found
JPY: 82,300
USD: 515.89
-
Tosaca 1216FML 4bar Pressure Relief Valve with BSP 1 in BSP Connection and a BSP 1 Exhaust Port 482861
1216FML Safety and Relief Valve. Applications: Steam Min. Set pressure 0.2 barg Overpressure 10% Blowdown Gases 10%, liquids 20% Connections: Threaded BSP / NPT Discharge coefficients k: 0.55 for gases, k: 0.48 for liquids Design EN-12516-1, EN-4126-1/7 DIN 259 and ANSI B2.1 Rating PN-40 Material Stainless steel 316L Materials EN Temperature range -10 → +350ﾟC Inspection EN-4126-1/7
1 products found
JPY: 82,300
USD: 515.89
-
Tosaca 1216FML 2.5bar Pressure Relief Valve With BSP 1 in BSP Connection and a BSP 1 Exhaust Port 482859
1216FML Safety and Relief Valve. Applications: Steam Min. Set pressure 0.2 barg Overpressure 10% Blowdown Gases 10%, liquids 20% Connections: Threaded BSP / NPT Discharge coefficients k: 0.55 for gases, k: 0.48 for liquids Design EN-12516-1, EN-4126-1/7 DIN 259 and ANSI B2.1 Rating PN-40 Material Stainless steel 316L Materials EN Temperature range -10 → +350ﾟC Inspection EN-4126-1/7
1 products found
JPY: 82,300
USD: 515.89
-
Tosaca 1216FML 3bar Pressure Relief Valve With BSP 1 in BSP Connection and a BSP 1 Exhaust Port 482860
1216FML Safety and Relief Valve. Applications: Steam Min. Set pressure 0.2 barg Overpressure 10% Blowdown Gases 10%, liquids 20% Connections: Threaded BSP / NPT Discharge coefficients k: 0.55 for gases, k: 0.48 for liquids Design EN-12516-1, EN-4126-1/7 DIN 259 and ANSI B2.1 Rating PN-40 Material Stainless steel 316L Materials EN Temperature range -10 → +350ﾟC Inspection EN-4126-1/7
1 products found
JPY: 82,300
USD: 515.89
-
Valsteam ADCA 4.5 bar SG Iron Float & Thermostatic Steam Trap, 3/4 in 29001
Connections are female screwed or flanged for horizontal or vertical installation. Float and Thermostatic Steam Traps. The FLT17LC float and thermostatic (integral air vent) steam traps series are designed for all types of low and high pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage is essential. Modulating discharge Discharges condensate at steam temperature Unaffected by sudden or wide load and pressure changes Excellent air discharge (by thermostatic air vent) GJS-400 SG-Iron body construction AISI-304 Stainless steel internals C/W inbuilt thermostatic air vent
1 products found
JPY: 70,100
USD: 439.42
-
Valsteam ADCA Bronze Globe Valve 444899, 1/2 in BSP 32 bar 444899
Bronze Globe Valve GV32B Series. Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. Features and Benefits. Rising stem PTFE renewable disk High-quality PTFE packing Body design conditions: PN32 198°C at 14 bar, 100°C at 32 bar. Application Information. For use with water, oil, compressed air, condensate and saturated steam. Materials. Valve body – Bronze Bonnet – Forged Brass Stem – Brass Disk – Glass filled PTFE Disk nut – Brass Packing – PTFE Handwheel - Aluminium
1 products found
JPY: 15,500
USD: 97.16
-
Valsteam ADCA Bronze Globe Valve 551259, 3/4 in BSP 32 bar 551259
Bronze Globe Valve GV32B Series. Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. Features and Benefits. Rising stem PTFE renewable disk High-quality PTFE packing Body design conditions: PN32 198°C at 14 bar, 100°C at 32 bar. Application Information. For use with water, oil, compressed air, condensate and saturated steam. Materials. Valve body – Bronze Bonnet – Forged Brass Stem – Brass Disk – Glass filled PTFE Disk nut – Brass Packing – PTFE Handwheel - Aluminium
1 products found
JPY: 20,100
USD: 126.00
-
Valsteam ADCA Bronze Globe Valve 551260, 1 in BSP 32 bar 551260
Bronze Globe Valve GV32B Series. Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. Features and Benefits. Rising stem PTFE renewable disk High-quality PTFE packing Body design conditions: PN32 198°C at 14 bar, 100°C at 32 bar. Application Information. For use with water, oil, compressed air, condensate and saturated steam. Materials. Valve body – Bronze Bonnet – Forged Brass Stem – Brass Disk – Glass filled PTFE Disk nut – Brass Packing – PTFE Handwheel - Aluminium
1 products found
JPY: 30,300
USD: 189.93
-
Valsteam ADCA Bronze Globe Valve 551261, 1-1/4 in BSP 32 bar 551261
Bronze Globe Valve GV32B Series. Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. Features and Benefits. Rising stem PTFE renewable disk High-quality PTFE packing Body design conditions: PN32 198°C at 14 bar, 100°C at 32 bar. Application Information. For use with water, oil, compressed air, condensate and saturated steam. Materials. Valve body – Bronze Bonnet – Forged Brass Stem – Brass Disk – Glass filled PTFE Disk nut – Brass Packing – PTFE Handwheel - Aluminium
1 products found
JPY: 39,500
USD: 247.60
-
Valsteam ADCA Bronze Globe Valve 551262, 1-1/2 in BSP 32 bar 551262
Bronze Globe Valve GV32B Series. Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. Features and Benefits. Rising stem PTFE renewable disk High-quality PTFE packing Body design conditions: PN32 198°C at 14 bar, 100°C at 32 bar. Application Information. For use with water, oil, compressed air, condensate and saturated steam. Materials. Valve body – Bronze Bonnet – Forged Brass Stem – Brass Disk – Glass filled PTFE Disk nut – Brass Packing – PTFE Handwheel - Aluminium
1 products found
JPY: 50,200
USD: 314.67
-
Valsteam ADCA Bronze Globe Valve 551263, 2 in BSP 32 bar 551263
Bronze Globe Valve GV32B Series. Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. Features and Benefits. Rising stem PTFE renewable disk High-quality PTFE packing Body design conditions: PN32 198°C at 14 bar, 100°C at 32 bar. Application Information. For use with water, oil, compressed air, condensate and saturated steam. Materials. Valve body – Bronze Bonnet – Forged Brass Stem – Brass Disk – Glass filled PTFE Disk nut – Brass Packing – PTFE Handwheel - Aluminium
1 products found
JPY: 75,100
USD: 470.76
-
Valsteam ADCA Pressure Reducing Valve 445773
Steam / Water Adcamix Mixers MX20. Steam / water mixers providing an instant source of low-pressure hot water by using steam and cold water. Incorporated in the mixer is a safety device which makes sure that steam cannot accidentally escape even if the cold water supply fails. Features and Benefits. Safety device against accidental steam ejection Non-return valves included Complete stainless steel construction Quiet operation. Application Information. For use with steam and cold water. Minimum steam pressure 2.5 bar Maximum steam pressure 10 bar. Materials. Steam body, water body, bolts, valve spring, steam cover, gasket, piston, water cover, steam valve, steam nozzle, mixing chamber, support and check valve – Stainless steel Gasket – FKM Packing – PTFE Steam valve – Stainless steel / PTFE
1 products found
JPY: 444,000
USD: 2,783.18
-
Valsteam ADCA Pneumatic Valve 444654
Control Valves PV25S. The PV25S control valves are single seated, with 2-way body construction and in-line straight connections. These PV25 valves have been designed for accurate control in any process condition. Features and Benefits. Single seated, two way, direct or reverse action valve Valve top flange permanently attached to the body Metal to metal sealing as standard PV25S Cast steel. Application Information. The wide application ranges of these control valves enables their use with saturated and superheated steam, hot and superheated water, air, gases and other non-corrosive fluids. Materials. Valve body – ASTM A216WCB/1.0619/GP240GH/1.0619 Bonnet – CF8/1.4308 Actuator – S235JRG2/1.0038 Yoke – C45E/1.1191
1 products found
JPY: 566,000
USD: 3,547.92
-
Valsteam ADCA Pneumatic Valve 446204
Control Valves PV25S. The PV25S control valves are single seated, with 2-way body construction and in-line straight connections. These PV25 valves have been designed for accurate control in any process condition. Features and Benefits. Single seated, two way, direct or reverse action valve Valve top flange permanently attached to the body Metal to metal sealing as standard PV25S Cast steel. Application Information. The wide application ranges of these control valves enables their use with saturated and superheated steam, hot and superheated water, air, gases and other non-corrosive fluids. Materials. Valve body – ASTM A216WCB/1.0619/GP240GH/1.0619 Bonnet – CF8/1.4308 Actuator – S235JRG2/1.0038 Yoke – C45E/1.1191
1 products found
JPY: 573,000
USD: 3,591.80
-
Valsteam ADCA Pneumatic Valve 481939
Control Valves PV25S. The PV25S control valves are single seated, with 2-way body construction and in-line straight connections. These PV25 valves have been designed for accurate control in any process condition. Features and Benefits. Single seated, two way, direct or reverse action valve Valve top flange permanently attached to the body Metal to metal sealing as standard PV25S Cast steel. Application Information. The wide application ranges of these control valves enables their use with saturated and superheated steam, hot and superheated water, air, gases and other non-corrosive fluids. Materials. Valve body – ASTM A216WCB/1.0619/GP240GH/1.0619 Bonnet – CF8/1.4308 Actuator – S235JRG2/1.0038 Yoke – C45E/1.1191
1 products found
JPY: 622,000
USD: 3,898.95
-
Valsteam ADCA Pneumatic Valve 445700
Control Valves PV25S. The PV25S control valves are single seated, with 2-way body construction and in-line straight connections. These PV25 valves have been designed for accurate control in any process condition. Features and Benefits. Single seated, two way, direct or reverse action valve Valve top flange permanently attached to the body Metal to metal sealing as standard PV25S Cast steel. Application Information. The wide application ranges of these control valves enables their use with saturated and superheated steam, hot and superheated water, air, gases and other non-corrosive fluids. Materials. Valve body – ASTM A216WCB/1.0619/GP240GH/1.0619 Bonnet – CF8/1.4308 Actuator – S235JRG2/1.0038 Yoke – C45E/1.1191
1 products found
JPY: 631,000
USD: 3,955.37
-
Valsteam ADCA Pneumatic Valve 482546
Control Valves PV25S. The PV25S control valves are single seated, with 2-way body construction and in-line straight connections. These PV25 valves have been designed for accurate control in any process condition. Features and Benefits. Single seated, two way, direct or reverse action valve Valve top flange permanently attached to the body Metal to metal sealing as standard PV25S Cast steel. Application Information. The wide application ranges of these control valves enables their use with saturated and superheated steam, hot and superheated water, air, gases and other non-corrosive fluids. Materials. Valve body – ASTM A216WCB/1.0619/GP240GH/1.0619 Bonnet – CF8/1.4308 Actuator – S235JRG2/1.0038 Yoke – C45E/1.1191
1 products found
JPY: 647,000
USD: 4,055.66
-
Valsteam ADCA Pneumatic Valve 481308
Control Valves PV25S. The PV25S control valves are single seated, with 2-way body construction and in-line straight connections. These PV25 valves have been designed for accurate control in any process condition. Features and Benefits. Single seated, two way, direct or reverse action valve Valve top flange permanently attached to the body Metal to metal sealing as standard PV25S Cast steel. Application Information. The wide application ranges of these control valves enables their use with saturated and superheated steam, hot and superheated water, air, gases and other non-corrosive fluids. Materials. Valve body – ASTM A216WCB/1.0619/GP240GH/1.0619 Bonnet – CF8/1.4308 Actuator – S235JRG2/1.0038 Yoke – C45E/1.1191
1 products found
JPY: 721,000
USD: 4,519.53
-
Valsteam ADCA 10 bar SG Iron Thermostatic Steam Trap Set 551274
Trap Set with GV32B, IS140, RT25 and FLT17LC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17LC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from right to left DN 1/2 to DN 3/4 – DN15 to DN20. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 126,000
USD: 789.82
-
Valsteam ADCA 10 bar SG Iron Thermostatic Steam Trap Set 551275
Trap Set with GV32B, IS140, RT25 and FLT17LC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17LC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from right to left DN 1/2 to DN 3/4 – DN15 to DN20. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 147,000
USD: 921.46
-
Valsteam ADCA 40 bar Thermodynamic Steam Trap Set 551277
Trap Set with GV32B, IS140, RT25 and DT42S. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermodynamic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Thermodynamic Steam Trap DT42S. The DT42S thermodynamic steam trap is compact, lightweight and easy to install. They are an excellent choice for high pressure systems including steam tracing applications. Operates on superheated steam Seat and disc can easily be replaced Unaffected by waterhammer and vibrations Built-in easy to clean strainer Female screwed ISO7/1Rp (BS21) Flanged DIN Can be installed in any position. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 113,000
USD: 708.33
-
Valsteam ADCA 40 bar Thermodynamic Steam Trap Set 551278
Trap Set with GV32B, IS140, RT25 and DT42S. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermodynamic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Thermodynamic Steam Trap DT42S. The DT42S thermodynamic steam trap is compact, lightweight and easy to install. They are an excellent choice for high pressure systems including steam tracing applications. Operates on superheated steam Seat and disc can easily be replaced Unaffected by waterhammer and vibrations Built-in easy to clean strainer Female screwed ISO7/1Rp (BS21) Flanged DIN Can be installed in any position. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 141,000
USD: 883.85
-
Valsteam ADCA 10 bar SG Iron Thermostatic Steam Trap Set 551276
Trap Set with GV32B, IS140, RT25 and FLT17HC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17HC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from left to right DN 1 HC – DN25 HC. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 234,000
USD: 1,466.81
-
Valsteam ADCA 14 bar SG Iron Thermostatic Steam Trap Set 551281
Trap Set with GV32B, IS140, RT25 and FLT17LC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17LC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from right to left DN 1/2 to DN 3/4 – DN15 to DN20. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 126,000
USD: 789.82
-
Valsteam ADCA 40 bar Thermodynamic Steam Trap Set 551279
Trap Set with GV32B, IS140, RT25 and DT42S. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermodynamic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Thermodynamic Steam Trap DT42S. The DT42S thermodynamic steam trap is compact, lightweight and easy to install. They are an excellent choice for high pressure systems including steam tracing applications. Operates on superheated steam Seat and disc can easily be replaced Unaffected by waterhammer and vibrations Built-in easy to clean strainer Female screwed ISO7/1Rp (BS21) Flanged DIN Can be installed in any position. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 196,000
USD: 1,228.61
-
Valsteam ADCA 4.5 bar SG Iron Thermostatic Steam Trap Set 551280
Trap Set with GV32B, IS140, RT25 and FLT17LC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17LC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from right to left DN 1/2 to DN 3/4 – DN15 to DN20. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 126,000
USD: 789.82
-
Valsteam ADCA 4.5 bar SG Iron Thermostatic Steam Trap Set 551282
Trap Set with GV32B, IS140, RT25 and FLT17LC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17LC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from right to left DN 1/2 to DN 3/4 – DN15 to DN20. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 147,000
USD: 921.46
-
Valsteam ADCA 14 bar SG Iron Thermostatic Steam Trap Set 551283
Trap Set with GV32B, IS140, RT25 and FLT17LC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17LC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from right to left DN 1/2 to DN 3/4 – DN15 to DN20. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 147,000
USD: 921.46
-
Valsteam ADCA 4.5 bar SG Iron Thermostatic Steam Trap Set 551284
Trap Set with GV32B, IS140, RT25 and FLT17HC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17HC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from left to right DN 1 HC – DN25 HC. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 234,000
USD: 1,466.81
-
Valsteam ADCA 14 bar SG Iron Thermostatic Steam Trap Set 551285
Trap Set with GV32B, IS140, RT25 and FLT17HC. Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Bronze Globe Valve GV32B. GV32B bronze inline stop valve with a rising stem, PTFE renewable disk and high-quality packing. Female screwed ISO7/1Rp (BS21) Body design conditions PN32 198°C at 14 bar 100°C at 32 bar. Y Strainers IS140. The IS140 Y strainer has been designed to protect traps, regulating valves and piping from dirt. Female screwed ISO7/1Rp (BS21) Horizontal or vertical downstream installation. Non-Return Valve RT25. The RT25 stainless steel disc check valve specially designed for use with steam and hot condensate. Female screwed ISO7/1Rp (BS21) Low-pressure drop Horizontal or vertical installation. Float ; Thermostatic Steam Trap FLT17LC. The FLT17HC float and thermostatic steam trap is designed for high and low-pressure steam heating and process equipment. Modulating discharge Discharges condensate at steam temperature Unaffected by pressure changes Excellent air discharge Female screwed ISO7/1Rp (BS21) Standard horizontal installation from left to right DN 1 HC – DN25 HC. Application Information. For use with saturated steam, condensate, compressed air, water, oil and other fluids.
1 products found
JPY: 234,000
USD: 1,466.81
-
Spray Gun, 10 bar 443169
Spray Gun SG20. The SG20 jet-spray gun has been designed for use with the MX20 steam/water mixer valve. Water and energy costs can be greatly reduced, plus, the environment is protected due to the avoidance of chemicals. Features and Benefits. Lock catch facilitates continuous operation Robust Protected against shock, heat and cold Lever regulates flow from a mist to a concentrated jet Caustic and acid-resistant rubber cladding. Application Information. For use with cold and hot water and designed for industrial use. Materials. Jet – Brass Spring – Stainless steel Valve – Brass External protection – Rubber
1 products found
JPY: 71,800
USD: 450.07
-
Valsteam ADCA Carbon Steel Steam Separator 348536
This product has been designed for use on water, steam and other gases which are in group 2 of the PED-European Equipment Directive 97/23/EC. Vertical Steam Separator S16/S. Vertical steam separator for the removal of moisture from steam and compressed air pipelines. Particles with heavier specific gravity, such as water and oil droplets, are separated from the steam and compressed air by centrifugal forces. The condensate collects at the bottom of the separator and can be drained using a suitable steam or compressed air trap. Features and Benefits. Several possibilities of installation No moving parts Carbon steel body. Application Information. For use with steam, compressed air and other gases. Materials. Body – EN10216-2/P235GH/1.0325 Heads – En10028-2/P265GH/1.0425 Inlet/Outlet Pipes – EN10216-2/P235GH/1.0325 Sockets Inlet/Outlet – ASTM A/105/1.0432 Sockets – ASTM A105/1.0432 Internals – EN10025-2/S235JR/1.0038
1 products found
JPY: 152,000
USD: 952.80
-
Valsteam ADCA Carbon Steel Steam Separator 348535
This product has been designed for use on water, steam and other gases which are in group 2 of the PED-European Equipment Directive 97/23/EC. Vertical Steam Separator S16/S. Vertical steam separator for the removal of moisture from steam and compressed air pipelines. Particles with heavier specific gravity, such as water and oil droplets, are separated from the steam and compressed air by centrifugal forces. The condensate collects at the bottom of the separator and can be drained using a suitable steam or compressed air trap. Features and Benefits. Several possibilities of installation No moving parts Carbon steel body. Application Information. For use with steam, compressed air and other gases. Materials. Body – EN10216-2/P235GH/1.0325 Heads – En10028-2/P265GH/1.0425 Inlet/Outlet Pipes – EN10216-2/P235GH/1.0325 Sockets Inlet/Outlet – ASTM A/105/1.0432 Sockets – ASTM A105/1.0432 Internals – EN10025-2/S235JR/1.0038
1 products found
JPY: 147,000
USD: 921.46
-
Valsteam ADCA Carbon Steel Steam Separator 348539
This product has been designed for use on water, steam and other gases which are in group 2 of the PED-European Equipment Directive 97/23/EC. Vertical Steam Separator S16/S. Vertical steam separator for the removal of moisture from steam and compressed air pipelines. Particles with heavier specific gravity, such as water and oil droplets, are separated from the steam and compressed air by centrifugal forces. The condensate collects at the bottom of the separator and can be drained using a suitable steam or compressed air trap. Features and Benefits. Several possibilities of installation No moving parts Carbon steel body. Application Information. For use with steam, compressed air and other gases. Materials. Body – EN10216-2/P235GH/1.0325 Heads – En10028-2/P265GH/1.0425 Inlet/Outlet Pipes – EN10216-2/P235GH/1.0325 Sockets Inlet/Outlet – ASTM A/105/1.0432 Sockets – ASTM A105/1.0432 Internals – EN10025-2/S235JR/1.0038
1 products found
JPY: 174,000
USD: 1,090.70
