[John Drummond]RS Components
Filters
-
John Drummond DRUMTL20 Voltage Indicator CAT III 1000 V, CAT IV 600 V MTL20
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit. Right angled probe tip, two straight tips and instructions. Drummond Test Lamp MTL20. Bright LED indication of voltage between 50V and 500V AC/DC Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems Additional two button test allows the unit to draw a high current to differentiate between potentially hazardous phantom voltages and hazardous persistent voltages Finger shields and insulated probe tips with only 4mm of exposed metal Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant Meets the UK Health and Safety Executive guidance notes on electrician s test lamp (GS38) Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V No batteries required
1 products found
JPY: 31,900
USD: 199.96
-
[Discontinued]John Drummond DRUMTL10 Voltage Indicator CAT III 1000 V, CAT IV 600 V MTL10
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit. Carry case, right angled probe tip, two straight tips and instructions. Drummond Test Lamps MTL10. Bright LED indication of voltage between 50V and 500V AC/DC Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems Finger shields and insulated probe tips with only 4mm of exposed metal Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician s test lamp (GS38) Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V No batteries required
1 products found
JPY: 19,800
USD: 124.12
-
[Discontinued]John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit MTL10/PD
Handy carry case, right angled probe tip, two straight tips and instructions. Drummond MTL10 Test Lamp and Proving Unit Safety Kit. Voltage level indicator & proving unit safety kit comprising:. MTL10 Drummond Test Lamp. Bright LED indication of voltage between 50V and 500V AC/DC Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight Meets the UK Health and Safety Executive guidance notes on electrician s test lamp (GS38) Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V. PD440 Proving Unit:. Essential to check the MTL10 for correct operation prior to working on electrical circuits The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations Operating Temperature: -10°C to +40°C at max 70% RH Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent Dimensions: 143 x 84 x 50mm Weight: 400g approx including battery 6 AA batteries (required, see stock no. < 591-225') 591-225
1 products found
JPY: 28,440
USD: 178.27
-
[Discontinued]John Drummond MTL20 Voltage Indicator & Proving Unit Kit 28mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit MTL20/PD
Carry case, right angled probe tip, two straight tips and instructions. Drummond MTL20 Test Lamp and Proving Unit Safety Kit. Voltage level indicator & proving unit safety kit comprising:. MTL20 Drummond Test Lamp. Bright LED indication of voltage between 50V and 500V AC/DC Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight Meets the UK Health and Safety Executive guidance notes on electrician s test lamp (GS38) Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V. PD440 Proving Unit:. Essential to check the MTL20 for correct operation prior to working on electrical circuits The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations Operating Temperature: -10°C to +40°C at max 70% RH Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent Dimensions: 143 x 84 x 50mm Weight: 400g approx including battery 6 AA batteries (required, see stock no. < 591-225') 591-225
1 products found
JPY: 30,880
USD: 193.57
