[FlexLink]Electronic/Electrical Parts and Controll Equipments
Filters
-
FlexLink Beam Multi-Block, strut profile 30 mm, 60 mm, Groove Size 7.2mm XFAM 6
Multi-Block. Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting the sheet material.,Screw length to be sheet thickness +22mm.,XC type also includes a push on clamp for an alternative method of holding the sheet material (suitable for sheet thickness 1 to 6mm).
1 products found
JPY: 1,020
USD: 6.39
-
FlexLink Beam Mount Plate, strut profile 22 mm, 44 mm, Groove Size 5.5mm XDFB 22 A
Fixings not included. Mounting Plate XC, XF and XD. To connect beams end to beam side. The holes in the end of the beam must be deburred and threaded (M5 rolled). Use a countersunk screw to attach the plate to the beam end then secure to the T-slot of the beam side.
1 products found
JPY: 5,090
USD: 31.91
-
FlexLink Beam Mount Plate, strut profile 44 mm, 88 mm, Groove Size 11mm XCFB 44
Fixings not included. Mounting Plate XC, XF and XD. To connect beams end to beam side. The holes in the end of the beam must be deburred and threaded (M5 rolled). Use a countersunk screw to attach the plate to the beam end then secure to the T-slot of the beam side.
1 products found
JPY: 4,660
USD: 29.21
-
FlexLink Beam Mount Plate, strut profile 30 mm, 60 mm, Groove Size 7.2mm XFFB 30
Fixings not included. Mounting Plate XC, XF and XD. To connect beams end to beam side. The holes in the end of the beam must be deburred and threaded (M5 rolled). Use a countersunk screw to attach the plate to the beam end then secure to the T-slot of the beam side.
1 products found
JPY: 4,940
USD: 30.97
-
FlexLink Beam Mount Plate, strut profile 44 mm, 88 mm, Groove Size 11mm XCFB 44X88 A
Fixings not included. Mounting Plate XC, XF and XD. To connect beams end to beam side. The holes in the end of the beam must be deburred and threaded (M5 rolled). Use a countersunk screw to attach the plate to the beam end then secure to the T-slot of the beam side.
1 products found
JPY: 5,730
USD: 35.92
-
FlexLink Aluminium Beam, 44 x 44 mm, 5.6mm Groove , 2000mm Length XDBM 2X44
44mm x 44mm Beams. For compact light duty structures, a range of sizes and slot configurations based on 22mm and 44mm widths, including special 2 and 3 T-slot sections for enclosures. The "XD" range is ideal for framework of up to 1 m square with static point loads of up to 200N.
1 products found
JPY: 27,200
USD: 170.50
-
FlexLink Aluminium Beam, 44 x 44 mm, 5.6mm Groove , 1000mm Length XDBM 1X44
44mm x 44mm Beams. For compact light duty structures, a range of sizes and slot configurations based on 22mm and 44mm widths, including special 2 and 3 T-slot sections for enclosures. The "XD" range is ideal for framework of up to 1 m square with static point loads of up to 200N.
1 products found
JPY: 13,600
USD: 85.25
-
FlexLink Beam T-Slot Nut, strut profile 44 mm, 88 mm, Groove Size 11mm XCAN 5
T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
1 products found
JPY: 5,370
USD: 33.66
-
FlexLink Grey Polyamide Square End Cap 44 mm strut profile , Groove 11mm XCBE 44
Grey Polyamide End Caps. Push-on to provide a flush end to cut beams
1 products found
JPY: 8,830
USD: 55.35
-
FlexLink XC PE Sliding Element, 52mm L XCLE 34X52
Sliding Element for Guide Profile XC. For use with the guide profile (Stock No. < 261-2403') 261-2403 Fasteners included to fix to the XC beam T-slot
1 products found
JPY: 13,500
USD: 84.62
-
FlexLink Beam T-Slot Nut, strut profile 22 mm, 44 mm, Groove Size 5.5mm XDAN 5 A
T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
1 products found
JPY: 6,160
USD: 38.61
-
FlexLink Grey Polyamide Square End Cap 22 mm strut profile , Groove 5.5mm XDBE 22 L
Grey Polyamide End Caps. Push-on to provide a flush end to cut beams
1 products found
JPY: 5,140
USD: 32.22
-
FlexLink Beam Angle Bracket, strut profile 22 mm, 44 mm, Groove Size 5.5mm XDFA 22 A
Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.
1 products found
JPY: 1,390
USD: 8.71
-
FlexLink Steel XD Adjustable Foot, Beam, 5.5mm, M5 Thread XDFS 5X30
Adjusting Feet XD, XF and XC. Medium duty, with height adjustment to compensate for variations in floor surface etc. When used with XCBL (Light) beams, an end plate should be used. Beam to be deburred and roll threaded as required
1 products found
JPY: 1,960
USD: 12.29
-
FlexLink Beam Angle Bracket, strut profile 44 mm, Groove Size 11mm XCFA 44 A
Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.
1 products found
JPY: 3,480
USD: 21.81
-
FlexLink Beam Angle Bracket, strut profile 44 mm, Groove Size 11mm XLFA 44 B
Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.
1 products found
JPY: 2,020
USD: 12.66
-
FlexLink Beam Angle Bracket, strut profile 88 mm, Groove Size 11mm XMFA 84 A
Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.
1 products found
JPY: 4,070
USD: 25.51
-
FlexLink Beam Extruded Angle Bracket, strut profile 40 mm, 80 mm, Groove Size 11mm XCFA 44
Fixings not included. Universal Brackets XC. For securing ancillary components.
1 products found
JPY: 5,300
USD: 33.22
-
FlexLink XC Die Cast Aluminium, PE Sliding Element, 80mm L XCLE 34X80 A
Adjustable Sliding Element for Guide Profile XC. For use with the guide profile (Stock No. < 261-2403') 261-2403 The clearance between the element and the guide can be preset. The element features low-friction plastic inserts, and felt pads to remove any dirt and provide lubrication Fasteners included to fix to the XC beam T-slot
1 products found
JPY: 19,500
USD: 122.23
-
FlexLink XC Polyamide Guide Wheel, 48 mm OD tube XCAW 48
Wheels XC, Grey. Fitted with a steel ball bearing, the wheels enable simple linear motion, and moveable framework to be constructed. The wheels are available plain or with centre guide for motion in an XC (11 mm) T-slot. Both wheels come complete with spacer sleeves which make it possible to mount directly into the T-slot. Alternatively a yoke mounting is available to fit wheels to the end of XC44 beams (not XCBL).,Wheels bore size (mm) : 8.4 ,Yoke centre height (mm) : 42,Yoke width (mm) : 44
1 products found
JPY: 8,570
USD: 53.72
-
FlexLink XC Polyamide Guide Wheel, 48 mm OD tube XCAW 48 G
Wheels XC, Grey. Fitted with a steel ball bearing, the wheels enable simple linear motion, and moveable framework to be constructed. The wheels are available plain or with centre guide for motion in an XC (11 mm) T-slot. Both wheels come complete with spacer sleeves which make it possible to mount directly into the T-slot. Alternatively a yoke mounting is available to fit wheels to the end of XC44 beams (not XCBL).,Wheels bore size (mm) : 8.4 ,Yoke centre height (mm) : 42,Yoke width (mm) : 44
1 products found
JPY: 8,570
USD: 53.72
-
FlexLink Beam T-Slot Nut, strut profile 30 mm, 60 mm, Groove Size 7.2mm XFAN 5
T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
1 products found
JPY: 7,560
USD: 47.39
-
FlexLink Beam T-Slot Nut, strut profile 30 mm, 60 mm, Groove Size 7.2mm L7167-100
T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
1 products found
JPY: 7,560
USD: 47.39
-
FlexLink Beam Angle Bracket, strut profile 30 mm, 60 mm, Groove Size 7.2mm XFFA 30 A
Fixings not included. Angle Brackets XD, XF and XC. Connects beam end to beam side to provide maximum stability and flexibility with minimum beam preparation.
1 products found
JPY: 1,700
USD: 10.66
-
FlexLink Beam Angle Bracket, strut profile 30 mm, 60 mm, Groove Size 7.2mm XFFA 30 C + XFBE 30 C
Fixings not included. 3-way Angle Bracket XF c/w Cap
1 products found
JPY: 3,930
USD: 24.64
-
FlexLink Steel XF Adjustable Foot, Beam, 7.2mm, M6 Thread XFFS 6X30
Adjusting Feet XD, XF and XC. Medium duty, with height adjustment to compensate for variations in floor surface etc. When used with XCBL (Light) beams, an end plate should be used. Beam to be deburred and roll threaded as required
1 products found
JPY: 3,140
USD: 19.68
-
FlexLink Beam Extruded Angle Bracket, strut profile 40 mm, 80 mm, Groove Size 11mm XMFA 84
Fixings not included. Universal Brackets XC. For securing ancillary components.
1 products found
JPY: 6,530
USD: 40.93
-
FlexLink Steel XC Adjustable Foot, Beam, 11mm, M12 Thread XCFS 12X68
Adjusting Feet XD, XF and XC. Medium duty, with height adjustment to compensate for variations in floor surface etc. When used with XCBL (Light) beams, an end plate should be used. Beam to be deburred and roll threaded as required
1 products found
JPY: 7,450
USD: 46.70
-
FlexLink Polyamide XL Adjustable Foot, Beam, 11mm, M8 Thread XLFS 8
Adjusting Feet XD, XF and XC. Medium duty, with height adjustment to compensate for variations in floor surface etc. When used with XCBL (Light) beams, an end plate should be used. Beam to be deburred and roll threaded as required
1 products found
JPY: 1,880
USD: 11.79
-
FlexLink Beam Square Nut, strut profile 44 mm, Groove Size 11mm XLAQ 8
T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
1 products found
JPY: 1,870
USD: 11.72
-
FlexLink Beam Square Nut, strut profile 44 mm, Groove Size 11mm XLAQ 6
T-slot Nuts XC, XF and XD. Slot nuts can be inserted directly into the T-slot from the beam face,Features a sprung steel tab to hold the nut in position even in vertical positions.,Plain square nuts (thickness 5mm) must be inserted from the beam ends.
1 products found
JPY: 3,460
USD: 21.69
-
FlexLink Stainless Steel XF Floor Bracket, Beam, 7.2mm XFFA 100 S
Fixings Included. Floor Bracket XF. To anchor beam structures to the floor.,For light structures the brackets can replace feet.,For heavy structures they can be used in combination with adjustable feet.,Includes mounting fasteners
1 products found
JPY: 6,710
USD: 42.06
-
FlexLink Polyamide XC Adjustable Foot, Beam, 11mm, M12 Thread XCFS 12X60X71
Polyamide Heavy Duty Adjustable Feet XC. With height adjustment to compensate for variations in floor surface etc. When used with XCBL (Light) beams, an end plate should be used
1 products found
JPY: 5,680
USD: 35.61
-
FlexLink Polyamide XC Adjustable Foot, Beam, 11mm, M8 Thread XCFS 8X40X43
Polyamide Heavy Duty Adjustable Feet XC. With height adjustment to compensate for variations in floor surface etc. When used with XCBL (Light) beams, an end plate should be used
1 products found
JPY: 3,020
USD: 18.93
-
FlexLink Aluminium Beam, 44 x 44 mm, 11mm Groove , 2000mm Length XCBL 2X44
44mm x 44mm. For heavy duty structures, a range of sizes and slot configurations based on 44 mm, 64mm and 88mm widths.,Ideal for the manufacture of special purpose machines, framework, and partition structures of up to ,1 m x 2 m, with static point loads up to 500N.
1 products found
JPY: 19,700
USD: 123.49
-
FlexLink Aluminium Beam, 44 x 44 mm, 11mm Groove , 1000mm Length XCBL 1X44
44mm x 44mm. For heavy duty structures, a range of sizes and slot configurations based on 44 mm, 64mm and 88mm widths.,Ideal for the manufacture of special purpose machines, framework, and partition structures of up to ,1 m x 2 m, with static point loads up to 500N.
1 products found
JPY: 9,320
USD: 58.42
-
FlexLink Aluminium Beam, 44 x 44 mm, 11mm Groove , 2000mm Length XCBL 2X44 T2
44mm x 44mm. For heavy duty structures, a range of sizes and slot configurations based on 44 mm, 64mm and 88mm widths.,Ideal for the manufacture of special purpose machines, framework, and partition structures of up to ,1 m x 2 m, with static point loads up to 500N.
1 products found
JPY: 20,600
USD: 129.13
-
FlexLink Aluminium Beam, 44 x 44 mm, 11mm Groove , 1000mm Length XCBL 1X44 T2
44mm x 44mm. For heavy duty structures, a range of sizes and slot configurations based on 44 mm, 64mm and 88mm widths.,Ideal for the manufacture of special purpose machines, framework, and partition structures of up to ,1 m x 2 m, with static point loads up to 500N.
1 products found
JPY: 10,300
USD: 64.57
-
FlexLink Aluminium Beam, 44 x 44 mm, 11mm Groove , 1000mm Length XCBL 1X44 T2A
44mm x 44mm. For heavy duty structures, a range of sizes and slot configurations based on 44 mm, 64mm and 88mm widths.,Ideal for the manufacture of special purpose machines, framework, and partition structures of up to ,1 m x 2 m, with static point loads up to 500N.
1 products found
JPY: 10,200
USD: 63.94
-
FlexLink Aluminium Beam, 44 x 44 mm, 11mm Groove , 2000mm Length XCBL 2X44 T3
44mm x 44mm. For heavy duty structures, a range of sizes and slot configurations based on 44 mm, 64mm and 88mm widths.,Ideal for the manufacture of special purpose machines, framework, and partition structures of up to ,1 m x 2 m, with static point loads up to 500N.
1 products found
JPY: 22,300
USD: 139.79
