[CEL]RS Components
Filters
-
[Discontinued]CEL Dual Material Head for use with RBX02 RoboxDual RBX01-DM
RBX1-DM2 Material Head RBX01-ACC-AW Pack, 10 Alcohol-Impregnated Bed Wipes
RBX1 Robox is required to use this kit. Robox is not included. The replacement/spare head can be used on any RBX01 Robox and is attached to the second extruder. 2 Spare parts are provided in the material head kit. Without this part, it will not work.1 products found
JPY: 29,540
USD: 185.17
-
[Discontinued]CEL Extruder for use with all models of Robox 3D Printer 1.75mm RBX01-X2
RBX1-X2 extruder
RBX1 Robox is required to use this module. This Robox is sold separately. The bag pictured here is sold separately from this extruder. • Robox RBX01-X2 extruder • The new CEL Robox RBX01-X2 extruder has a slightly modified filament path. The RBX01-X2 extruder greatly improves processing of flexible filaments and improves component life when using abrasive filaments. High torque dual pinch wheel extruder delivers filament along Boden tube to Robox head Supported materials: PLA, ABS, HIPS, Nylon, PC, PVA, other materials currently under test RBX01-X2 extruder is the same as Robox equipment manufactured after March 2016. The Robox has room for two extruders, which can be used to deliver 1.75 mm filaments to the RBX01-SM or RBX01-DM head.1 products found
JPY: 18,860
USD: 118.22
-
[Discontinued]CEL 1.75mm Off White HIPS 3D Printer Filament, 800g RBX-HIP-NT001
Robox HIPS Filament. This high quality material is as strong and stiff as ABS, but is much easier to print with as it is less likely to shrink or warp. HIPS is a dissolvable filament that is frequently used as support material because it is so easily removable, however the material is also unique as you can sand, glue, prime or paint your prints. This extends the possibility of what you can produce on the Robox – beautiful, functional, bespoke prints decorated any way you want. HIPS is also ideal for printing in conjunction with ABS as the mechanical properties of the two materials are very similar, and they need to be printed at similar temperatures. The primary difference between the two materials is HIPS uses Limonene as a solvent, which leaves a nicer, cleaner finish. Filament diameter: 1.75mm Length (metres approx.): 240. Each reel is sealed in a reusable zip lock bag with a sachet of silica gel to control moisture. The bag is then placed in a sturdy windowed box for shipping. Included on the reel is an eeprom which can be read by a Robox® device. The eprom stores data on the material and statistics of use. Compatible with any printer which accepts 1.75mm filament. The eprom requires a reader which is fitted to all Robox® units.
1 products found
JPY: 6,260
USD: 39.24
-
[Discontinued]CEL 1.75mm Pink PLA 3D Printer Filament, 700g RBX-PLA-PK002
Robox SmartReel Filament. Robox materials are supplied on a SmartReel which holds data about temperature settings, print speed, diameter and even the amount of filament which has been used on that reel. As a user this makes printing very easy, you load the filament and AutoMaker will automatically change to the settings saved on the reel. Filament diameter: 1.75mm Length (metres approx.): 240. Each reel is sealed in a reusable zip lock bag with a sachet of silica gel to control moisture. The bag is then placed in a sturdy windowed box for shipping. Included on the reel is an eeprom which can be read by a Robox® device. The eeprom stores data on the material and statistics of use. Compatible with any printer which accepts 1.75mm filament. The Eeprom requires a reader which is fitted to all Robox® units. SmartReel™ stores a preset print profile which is read by Robox to automatically set vital extrusion characteristics. SmartReel™ can be re-written to your own profiles using appropriate software. techABS is similar to ABS but has a new formula to reduce shrinkage therefore warping. techABS is easy to carve, cut, sand, machine, glue, paint and otherwise finish like regular ABS. techABS filament also has similar impact and flex resistance to our regular ABS
1 products found
JPY: 4,400
USD: 27.58
-
[Discontinued]CEL Single Material Dual Nozzle Head for use with all models of Robox 3D Printer RBX01-S2
1 x Single material dual nozzle head. RBX1 Robox is required to use this kit. Robox is not included and is sold separately (RS ; 134-7551 134-7551 ). Some simple assembly is required. Robox Single Material Dual Nozzle Head. The single material dual nozzle head for Robox has 2 nozzles both of which are supplied from a single material feed. The large 0.8 mm nozzle can be used to create fast and strong draft prints or anything requiring low detail and thick walls or to fill the internal parts of a print. The 0.3 mm nozzle is excellent for small details and low layer heights such as 0.02 mm 20 μm layers. This head uses needle valves to close the nozzles to avoid stringing and blobs it is fitted to Robox via the HeadLock system. Fast fill and small details in the same layer of the print Titanium Heat Bridge - Fully all-metal construction means the head can cope with higher temperatures (>280°C) Silicone Thermal Jacket - Improves heat-up time New needle seal design for improved reliability and life. Modified head housing for improved connection reliability with the x-carriage. Improved heatsink with more cooling fins and more efficient thermodynamic performance Quick draft prints using the 0.8 mm nozzle Detailed high resolution prints using the smaller 0.3 mm nozzle Material Compatibility: PLA, ABS, HIPS, Nylon, PC, PVA
1 products found
JPY: 25,750
USD: 161.41
