[ALWAYSE]Electronic/Electrical Parts and Controll Equipments
Filters
-
ALWAYSE Press Fit 25.4mm Steel Ball Transfer Unit 7120
Press Fit Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 0 Robust body Flange type fitting
1 products found
JPY: 13,000
USD: 81.49
-
ALWAYSE Inverted Flange 25.4mm Steel Ball Transfer Unit 7125
Inverted Flange Fitting Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 2 Top flange fixing
1 products found
JPY: 24,900
USD: 156.08
-
ALWAYSE Bolt 12.7mm Steel Ball Transfer Unit 7106
Bolt Fitting Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 1 Bolt fixing Two spanner flats for fixing and removing Bolt type fitting
1 products found
JPY: 4,640
USD: 29.09
-
ALWAYSE Bolt 25.4mm Steel Ball Transfer Unit 7128
Bolt Fitting Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 1 Bolt fixing Two spanner flats for fixing and removing Bolt type fitting
1 products found
JPY: 15,600
USD: 97.79
-
ALWAYSE 4-Hole Flange 38.1mm Steel Ball Transfer Unit 7151
Flange Fitting Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 3 Bottom flange fixing
1 products found
JPY: 29,800
USD: 186.80
-
ALWAYSE Inverted Flange 38.1mm Steel Ball Transfer Unit 7152
Inverted Flange Fitting Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 2 Top flange fixing
1 products found
JPY: 29,200
USD: 183.04
-
ALWAYSE Spring Loaded 12.7mm Steel Ball Transfer Unit 7105
Internal Spring Loaded Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Compact Interference fitting Greater shock loading protection
1 products found
JPY: 6,030
USD: 37.80
-
ALWAYSE Stud 4.8mm Steel Ball Transfer Unit Stainless Steel 11MI-05-13
Please refer to manufacturers datasheet for each Mini Ball Transfer Unit technical specification. Mini Ball Transfer Units. Mini Ball Transfer Units are suitable for use within a wide variety of applications including:. Clean room equipment Lightweight mini-turntables Measuring equipment Small linear motion guides Other miniature mechanisms. The units are precision engineered, capable of accepting a dynamic load from 5 to 20kg (depending on type), and feature coarse metric threads. This range of Mini Ball Transfer Units also feature carbon steel or stainless steel load or small balls, and outer housings manufactured from aluminium, zinc-plated steel or stainless steel.
1 products found
JPY: 6,110
USD: 38.30
-
ALWAYSE Stud 4.8mm Stainless Steel Ball Transfer Unit Stainless Steel 11MI-05-15
Please refer to manufacturers datasheet for each Mini Ball Transfer Unit technical specification. Mini Ball Transfer Units. Mini Ball Transfer Units are suitable for use within a wide variety of applications including:. Clean room equipment Lightweight mini-turntables Measuring equipment Small linear motion guides Other miniature mechanisms. The units are precision engineered, capable of accepting a dynamic load from 5 to 20kg (depending on type), and feature coarse metric threads. This range of Mini Ball Transfer Units also feature carbon steel or stainless steel load or small balls, and outer housings manufactured from aluminium, zinc-plated steel or stainless steel.
1 products found
JPY: 10,400
USD: 65.19
-
ALWAYSE Stud 4.8mm Stainless Steel Ball Transfer Unit Stainless Steel 11MI-05-17
Please refer to manufacturers datasheet for each Mini Ball Transfer Unit technical specification. Mini Ball Transfer Units. Mini Ball Transfer Units are suitable for use within a wide variety of applications including:. Clean room equipment Lightweight mini-turntables Measuring equipment Small linear motion guides Other miniature mechanisms. The units are precision engineered, capable of accepting a dynamic load from 5 to 20kg (depending on type), and feature coarse metric threads. This range of Mini Ball Transfer Units also feature carbon steel or stainless steel load or small balls, and outer housings manufactured from aluminium, zinc-plated steel or stainless steel.
1 products found
JPY: 6,030
USD: 37.80
-
ALWAYSE Stud 6.4mm Stainless Steel Ball Transfer Unit Stainless Steel 11MI-06-15
Please refer to manufacturers datasheet for each Mini Ball Transfer Unit technical specification. Mini Ball Transfer Units. Mini Ball Transfer Units are suitable for use within a wide variety of applications including:. Clean room equipment Lightweight mini-turntables Measuring equipment Small linear motion guides Other miniature mechanisms. The units are precision engineered, capable of accepting a dynamic load from 5 to 20kg (depending on type), and feature coarse metric threads. This range of Mini Ball Transfer Units also feature carbon steel or stainless steel load or small balls, and outer housings manufactured from aluminium, zinc-plated steel or stainless steel.
1 products found
JPY: 9,970
USD: 62.50
-
ALWAYSE Stud 6.4mm Stainless Steel Ball Transfer Unit Stainless Steel 11MI-06-17
Please refer to manufacturers datasheet for each Mini Ball Transfer Unit technical specification. Mini Ball Transfer Units. Mini Ball Transfer Units are suitable for use within a wide variety of applications including:. Clean room equipment Lightweight mini-turntables Measuring equipment Small linear motion guides Other miniature mechanisms. The units are precision engineered, capable of accepting a dynamic load from 5 to 20kg (depending on type), and feature coarse metric threads. This range of Mini Ball Transfer Units also feature carbon steel or stainless steel load or small balls, and outer housings manufactured from aluminium, zinc-plated steel or stainless steel.
1 products found
JPY: 6,840
USD: 42.88
-
ALWAYSE Stud 6.4mm Steel Ball Transfer Unit Stainless Steel 11MI-06-13
Please refer to manufacturers datasheet for each Mini Ball Transfer Unit technical specification. Mini Ball Transfer Units. Mini Ball Transfer Units are suitable for use within a wide variety of applications including:. Clean room equipment Lightweight mini-turntables Measuring equipment Small linear motion guides Other miniature mechanisms. The units are precision engineered, capable of accepting a dynamic load from 5 to 20kg (depending on type), and feature coarse metric threads. This range of Mini Ball Transfer Units also feature carbon steel or stainless steel load or small balls, and outer housings manufactured from aluminium, zinc-plated steel or stainless steel.
1 products found
JPY: 9,230
USD: 57.86
-
ALWAYSE Circular Flange 15.8mm Stainless Steel Ball Transfer Unit 515-2-15
Euro Ball Transfer Unit. Pre-lubricated ball transfer units to move or transfer loads in all directions. Max speed 1m/sec. Available in a wide choice of load capacities, sizes and fixings. Operating temperatures -30°C to 70°C (continuous use, depending on seals used). Features and Benefits. Main bearing cup toughened steel Felt or plastic seal (except 15mm) Self-cleaning hole Flange type fitting. Fixing Clip. Fixing clips that allow fixing from either the top side of a ball deck or the underside. Suitable for deck thicknesses up to 4mm.
1 products found
JPY: 5,780
USD: 36.23
-
ALWAYSE Circular Flange 15.8mm Stainless Steel Ball Transfer Unit 515016
Euro Ball Transfer Unit. Pre-lubricated ball transfer units to move or transfer loads in all directions. Max speed 1m/sec. Available in a wide choice of load capacities, sizes and fixings. Operating temperatures -30°C to 70°C (continuous use, depending on seals used). Features and Benefits. Main bearing cup toughened steel Felt or plastic seal (except 15mm) Self-cleaning hole Flange type fitting. Fixing Clip. Fixing clips that allow fixing from either the top side of a ball deck or the underside. Suitable for deck thicknesses up to 4mm.
1 products found
JPY: 4,110
USD: 25.76
-
ALWAYSE Fixing Clip Ball Transfer Unit CL14-15
Euro Ball Transfer Unit. Pre-lubricated ball transfer units to move or transfer loads in all directions. Max speed 1m/sec. Available in a wide choice of load capacities, sizes and fixings. Operating temperatures -30°C to 70°C (continuous use, depending on seals used). Features and Benefits. Main bearing cup toughened steel Felt or plastic seal (except 15mm) Self-cleaning hole Flange type fitting. Fixing Clip. Fixing clips that allow fixing from either the top side of a ball deck or the underside. Suitable for deck thicknesses up to 4mm.
1 products found
JPY: 400
USD: 2.51
-
ALWAYSE 4-Hole Flange 25.4mm Steel Ball Transfer Unit 7122
Flange Fitting Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 3 Bottom flange fixing
1 products found
JPY: 19,000
USD: 119.10
-
ALWAYSE Bolt 38.1mm Steel Ball Transfer Unit 7153
Bolt Fitting Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 1 Bolt fixing Two spanner flats for fixing and removing Bolt type fitting
1 products found
JPY: 25,400
USD: 159.22
-
ALWAYSE Press Fit 12.7mm Steel Ball Transfer Unit 7101
Press Fit Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used). Pattern Heviload 0 Robust body Flange type fitting
1 products found
JPY: 4,600
USD: 28.84
-
ALWAYSE Stud 35mm PUR Ball Transfer Unit ACP35RH
Please refer to manufacturer's datasheet for the float-on castor base to roller height (an adjustable dimension). Float-on Castors. Fragile materials such as glass sheet within manufacturing environments, and the movement of fragile sheet within other facilities requires special handling equipment. Alwayse Float-on Castors are specially designed to enable delicate polished fragile material (especially sheet material) to be moved smoothly, easily and without damage to the material involved. Bright Zinc Plated or Stainless Steel units are available. Benefits. Ease of installation Non-marking, easily-replaceable ball castor (polyurethane or rubber) Easily-replaceable individual component parts, including stem, circlip and washers Harder-wearing ball castor option (polyurethane in place of natural rubber) Load rating of 15kg (Ø35mm castor ball) to 20kg (Ø50mm castor ball) per unit
1 products found
JPY: 4,000
USD: 25.07
-
ALWAYSE Stud 35mm Rubber Ball Transfer Unit ACR35LH
Please refer to manufacturer's datasheet for the float-on castor base to roller height (an adjustable dimension). Float-on Castors. Fragile materials such as glass sheet within manufacturing environments, and the movement of fragile sheet within other facilities requires special handling equipment. Alwayse Float-on Castors are specially designed to enable delicate polished fragile material (especially sheet material) to be moved smoothly, easily and without damage to the material involved. Bright Zinc Plated or Stainless Steel units are available. Benefits. Ease of installation Non-marking, easily-replaceable ball castor (polyurethane or rubber) Easily-replaceable individual component parts, including stem, circlip and washers Harder-wearing ball castor option (polyurethane in place of natural rubber) Load rating of 15kg (Ø35mm castor ball) to 20kg (Ø50mm castor ball) per unit
1 products found
JPY: 2,510
USD: 15.73
-
ALWAYSE Stud 50mm Rubber Ball Transfer Unit ACR50LH
Please refer to manufacturer's datasheet for the float-on castor base to roller height (an adjustable dimension). Float-on Castors. Fragile materials such as glass sheet within manufacturing environments, and the movement of fragile sheet within other facilities requires special handling equipment. Alwayse Float-on Castors are specially designed to enable delicate polished fragile material (especially sheet material) to be moved smoothly, easily and without damage to the material involved. Bright Zinc Plated or Stainless Steel units are available. Benefits. Ease of installation Non-marking, easily-replaceable ball castor (polyurethane or rubber) Easily-replaceable individual component parts, including stem, circlip and washers Harder-wearing ball castor option (polyurethane in place of natural rubber) Load rating of 15kg (Ø35mm castor ball) to 20kg (Ø50mm castor ball) per unit
1 products found
JPY: 3,150
USD: 19.75
-
ALWAYSE Stud 50mm Rubber Ball Transfer Unit ACR50RH
Please refer to manufacturer's datasheet for the float-on castor base to roller height (an adjustable dimension). Float-on Castors. Fragile materials such as glass sheet within manufacturing environments, and the movement of fragile sheet within other facilities requires special handling equipment. Alwayse Float-on Castors are specially designed to enable delicate polished fragile material (especially sheet material) to be moved smoothly, easily and without damage to the material involved. Bright Zinc Plated or Stainless Steel units are available. Benefits. Ease of installation Non-marking, easily-replaceable ball castor (polyurethane or rubber) Easily-replaceable individual component parts, including stem, circlip and washers Harder-wearing ball castor option (polyurethane in place of natural rubber) Load rating of 15kg (Ø35mm castor ball) to 20kg (Ø50mm castor ball) per unit
1 products found
JPY: 3,160
USD: 19.81
-
［Discontinued］ALWAYSE Stud 25.4mm Stainless Steel Ball Transfer Unit 602511525
Hi-Tech Ball Transfer Units. Pre-lubricated ball transfer units to move or transfer loads in any direction. Max speed 1m/sec. Manufactured to general tolerance of ±0.3mm. Plated with zinc/iron alloy finish for protection in use. Operating temperature -30°C to +70°C (continuous use, depending on seals used).. Double-sealed to prevent dirt ingress Rust-proof materials to prevent corrosion Re-circulating ball mechanism with hardened track ensures long life
1 products found
JPY: 3,850
USD: 24.13
