MTL

MTL Analogue Output, Signal Conditioner　MTL5582B

MTL5582 - Resistance Isolator. The MTL5582 connects to a resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the resistance to a monitoring system in the safe area. One channel Connecting from 2-, 3- or 4-wire RTDs Selection with a switch LED indicator

Phoenix Contact

Phoenix Contact Busbar　2966786

Phoenix Contact

Phoenix Contact MINI MCR-SL-UI-REL, Relay Output, Adjustable Threshold Switch　2864480

Adjustable Threshold Switch. This Switch can be mounted on DIN rail individually, or with other units. The housing is 102.5mm high by 6.2mm wide.The performance specifications are similar to standard sized MCR products. Requires a 24Vdc supply. Input, 0-20mA, 0-10V Adjustable alarm switching point and hysteresis Output, SPDT relay rated 2A at 250 Vac Adjustable Relay operate/ drop-out delay time

Phoenix Contact

Phoenix Contact MINI MCR-SL-RPS-I-I, Current Output, Power Supply Repeater　2864422

3 way Isolated Power Supply and 4-20mA Signal Repeater. Can be mounted on DIN rail individually or with other units. The housing is 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products.,Requires a 24Vdc supply, either directly to module terminals or via a DIN rail power bus. Powers 2 and 3 wire sensors Input and output 4-20mA Isolates the measurement signal

Phoenix Contact

Phoenix Contact MINI MCR-SL-UI-F, Frequency Output, Signal Converter　2864082

Current/Voltage to Frequency Converter with 3-Way Isolation. Inputs, 0-20mA, 4-20mA, 1-10mA, 2-10mA, 0-10V, 1-5V, 0-5V, 2-10V Outputs, 8 frequency bands and 8 PWM standards 3-way isolated 24VDC powered on module or via DIN rail bus connector 6.2mm wide Screw terminals

RS PRO

RS PRO Current Output, Signal Conditioner　788-6987

GEN1700 Universal Signal Conditioner. New generation DIN rail mounted universal signal conditioner, suitable for most common process and temperature sensor inputs. Designed for ease of use and quick configuration Programmable current or voltage output signal plus dual trip relays with a programmable delay function Isolation between input, outputs and supply Temperature ranges are linear to temperature USB interface

RS PRO

RS PRO Current Output, Signal Conditioner　788-6996

Configuration Software (USB Speed-Link): www.status.co.uk/software.html. GEN1600VI Isolator / Conditioner. GEN1600VI is a powered isolator/conditioner which can be configured to any special requirement. Its output stage offers either voltage, bipolar voltage or current re-transmission signals. USB Speed-Link 3.4.1.0 - http://www.status.co.uk/software.html Accepts any voltage signal between -50 and 50 V ac Accepts any current signal between -50 and 50 mA Transmitter power supply is provided on both input and output Products can accept sink or source applications Free software tools available to meet your requirements Operating voltages are 10 to 48 V dc and 10 to 32 V ac USB Interface. PCSSR_481552

Phoenix Contact

Phoenix Contact EMD-SL-V-UV-300 Voltage Monitoring Relay With SPDT Contacts, 24 V dc, 24 → 230 V ac, 1 Phase　2866035

EMD Monitoring Relays. This range of multifunctional monitoring relays allows to monitor electrical as well as physical system parameters. EMD Monitoring Relays can measure:. Currents Voltages, 1- and 3-phase Phase sequences Real powers Loads, cos φ Motor winding temperatures Fill levels

RS PRO

RS PRO Converter　223-357

RS PRO

RS PRO Converter　223-363

RS PRO

RS PRO Converter　223-385

RS PRO

RS PRO Amplifier　629-465

RS PRO

RS PRO Converter　629-500

RS PRO

RS PRO Converter　629-522

RS PRO

RS PRO Voltage Monitoring Relay With SPDT Contacts, 1 Phase, Undervoltage　102-6130

RS PRO

RS PRO Voltage Monitoring Relay With SPDT Contacts, 1 Phase, Overvoltage, Undervoltage　102-6131

RS PRO

RS PRO Voltage Monitoring Relay With SPDT Contacts, 1 Phase, Overvoltage, Undervoltage　102-6133

RS PRO

RS PRO Current Monitoring Relay With SPDT Contacts, 1 Phase　102-6134

RS PRO

RS PRO Phase, Voltage Monitoring Relay With SPDT Contacts, 3 Phase, Undervoltage　102-6135

RS PRO

RS PRO Phase, Voltage Monitoring Relay With SPDT Contacts, 3 Phase, Undervoltage　102-6136

RS PRO

RS PRO Phase, Voltage Monitoring Relay With SPDT Contacts, 3 Phase, Overvoltage, Undervoltage　102-6137

Phoenix Contact

Phoenix Contact PSM-ME-RS232/RS232-P, Interface Isolator　2744461

Interface Isolator RS-232/RS-232. Significant increase of noise immunity in industrial applications 3-way isolation between both interfaces & voltage supply

Siemens

Siemens Temperature Monitoring Relay With SPST Contacts, 24 → 240 V ac/dc　3RS1140-1GW60

Temperature Monitoring Relays, 3RS10/11/1000/1010. Extremely simple operation Settable hysteresis Fast troubleshooting by detecting wire breakage Relay configuration: SPNC; SPNO

Brodersen Controls

Brodersen Controls Analogue Output, Signal Conditioner　PXT-10.024/RS

Pt100 sensor not supplied. Temperature Converter. Galvanic isolation output to supply Pt100 2 or 3-wire operation Selectable input sensor temperature range: -50 to +100°C or -50 to +300°C Output selectable via terminals: 0 to 10V, 0 to 20mA or 4 to 20mA Offset and gain adjustable via front panel, ±5% of max signal

RS PRO

RS PRO Relay Output, Signal Conditioner　218-4447

24Vdc Trip Amplifiers, Signal Isolator/Converters. Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation. Input and output stages powered from separate secondaries of the supply transformer to provide 3-port isolation Dual supply voltage operation LED indication of "power on"

RS PRO

RS PRO Relay Output, Signal Conditioner　218-4453

24Vdc Trip Amplifiers, Signal Isolator/Converters. Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation. Input and output stages powered from separate secondaries of the supply transformer to provide 3-port isolation Dual supply voltage operation LED indication of "power on"

RS PRO

RS PRO Analogue Output, Isolating Signal Converter　218-4469

24Vdc Trip Amplifiers, Signal Isolator/Converters. Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation. Input and output stages powered from separate secondaries of the supply transformer to provide 3-port isolation Dual supply voltage operation LED indication of "power on"

Schneider Electric

2P Impulse Relay With NO Contacts, 16 A, 24 V ac Coil　GF1620B7

Conforms to IEC947-5-1, IEC669-1, IEC669-2. Control/Impulse Relays for Modular Contactors. Latch on impulse and remain latched until another impulse is applied Max 1 min on, with min. 4 min off Make Time 70 ms Current shown is I ;sub>th ;/sub>

Schneider Electric

2P Impulse Relay With NO Contacts, 16 A, 48 V dc, 110 V ac Coil　GF1620F7

Conforms to IEC947-5-1, IEC669-1, IEC669-2. Control/Impulse Relays for Modular Contactors. Latch on impulse and remain latched until another impulse is applied Max 1 min on, with min. 4 min off Make Time 70 ms Current shown is I ;sub>th ;/sub>

Schneider Electric

2P Impulse Relay With NO Contacts, 16 A, 110 V dc, 230 → 240 V ac Coil　GF1620U7

Conforms to IEC947-5-1, IEC669-1, IEC669-2. Control/Impulse Relays for Modular Contactors. Latch on impulse and remain latched until another impulse is applied Max 1 min on, with min. 4 min off Make Time 70 ms Current shown is I ;sub>th ;/sub>

Schneider Electric

2P Impulse Relay With NO/NC Contacts, 16 A, 110 V ac, 48 V dc Coil　GF1611F7

Conforms to IEC947-5-1, IEC669-1, IEC669-2. Control/Impulse Relays for Modular Contactors. Latch on impulse and remain latched until another impulse is applied Max 1 min on, with min. 4 min off Make Time 70 ms Current shown is I ;sub>th ;/sub>

Schneider Electric

2P Impulse Relay With NO/NC Contacts, 16 A, 110 V dc, 230 → 240 V ac Coil　GF1611U7

Conforms to IEC947-5-1, IEC669-1, IEC669-2. Control/Impulse Relays for Modular Contactors. Latch on impulse and remain latched until another impulse is applied Max 1 min on, with min. 4 min off Make Time 70 ms Current shown is I ;sub>th ;/sub>

Phoenix Contact

Phoenix Contact EMG 12-TR/INV, Signal Conditioner　2943437

Polarity Reversing Module. Module for reversing the polarity of the transistor signals, NPN to PNP or PNP to NPN Compact format for assembly on DIN rail

Dold

Dold Voltage Monitoring Relay With DPDT Contacts, 230/400 V ac, 3 Phase　IL9077.12 3/NAC 400/230V 0.1-20S

IL9077 - Over and under voltage relay. Detection of over voltage, under voltage and phase failure Network error diagnosis through more LEDs Response values for over and under voltage separately adjustable Adjustment ranges 0.9 → 1.3 U ;sub>N ;/sub> and / or 0.7 → 1.1 U ;sub>N ;/sub> Adjustable time delays from 0.1 → 20 s Nom. voltage: 3 AC 230 / 400 V, 50 / 60 Hz Voltage range: 0.7 → 1.3 U ;sub>N ;/sub> Overload capability: 1.35 U ;sub>N ;/sub> continuous Rest current principle Without auxiliary voltage Any phase sequence Nominal operating mode: Continuous operation Can also be used as single phase 2 changers Protection class (housing / terminals): IP40/IP20 Overall width 35 mm To IEC 255, VDE 0435 section 303 Manuf. ref.: IL9077.12 3/N AC 400/230 0.1 → 20 s

Red Lion

Red Lion Frequency Output, Signal Conditioner　IFMR0036

IFMR - speed monitor. Switches on if over/under limits or if device is idle Adjustable thresholds: 0.1 Hz → 25 kHz DC Version: IFMR0036 (9 → 32 VDC) AC Version: IFMR0066 (85 → 250 VAC) All sensors are adjustable via DIP switch Status display via 2 Info LEDs Easy assembly on C or T/Hat

Red Lion

Red Lion RS422/485 Output, Signal Conditioner　ICM40030

ICM4 - Interface converter, RS232 to RS485/RS422. Converts from RS232 to RS485/RS422 and vice versa 3 INFO LEDs for RXD, TXD and power supply Easy to mount onto DIN rail

Phoenix Contact

Phoenix Contact MCR-C-U-I-4-DC, Current Output, Galvanic Isolator　2814537

3-Way Isolation Amplifier. Galvanic isolation Converts analogue signals into standard signals Single-channel design

Brodersen Controls

Brodersen Controls Analogue Output, Signal Conditioner　PXU-20.924/RS

Process Signal Converter. Galvanic isolation inputs to outputs Input signal selection via front panel switch Output selection by connection Offset/gain span adjustable, via front panel, ±5%

Brodersen Controls

Brodersen Controls Analogue Output, Signal Conditioner　PXR-10.924/RS

Resistance to Analogue Signal Converter. Galvanically isolated User selectable input ; output Adjustable offset ; gain ±5%

Phoenix Contact

Phoenix Contact PSM-ME-RS232/RS485-P, RS422, RS485 Output, Interface Converter　2744416

Interface Converter RS-232/RS422, RS-232/RS-485. RS-422/RS485 standards to create fast interference-safe point-to-point connections between participants in industrial applications For programming and parameterization connections, e.g. between PC and S5 PLC controls or drive regulators with RS-422/RS-485 interfaces