[EXACT]RS Components
Filters
-
EXACT 3 piece HSS Conical Drill Set 3mm to 30.5mm 5209
HSS Cone Cutter Set
1 products found
JPY: 19,800
USD: 124.12
-
EXACT 3 piece HSS Step Drill Set 4mm to 30mm 7004
HSS Step Drills. For rapid drilling of sheet metals and plastics. For use with power drills with a 13mm chuck.
1 products found
JPY: 39,200
USD: 245.72
-
EXACT 05765 Deburring Tool 5765
Countersinks. Convenient hand tool for deburring holes in metal, wood and plastic Three-fluted construction with inclined angle of 90º
1 products found
JPY: 8,050
USD: 50.46
-
EXACT HSS 24 → 40mm Cone Cutter 5204
Standard HSS Cone Cutter. High Speed Steel tapered cone cutter for power tool use for drilling clean holes in plastic, PC boards, alloys and sheet metal up to 2mm thick. Shank length 22mm No pilot hole required
1 products found
JPY: 17,700
USD: 110.95
-
EXACT HSS 16 → 30.5mm Cone Cutter 5203
Standard HSS Cone Cutter. High Speed Steel tapered cone cutter for power tool use for drilling clean holes in plastic, PC boards, alloys and sheet metal up to 2mm thick. Shank length 22mm No pilot hole required
1 products found
JPY: 8,150
USD: 51.09
-
EXACT HSS 6 → 20mm Cone Cutter 5202
Standard HSS Cone Cutter. High Speed Steel tapered cone cutter for power tool use for drilling clean holes in plastic, PC boards, alloys and sheet metal up to 2mm thick. Shank length 22mm No pilot hole required
1 products found
JPY: 4,730
USD: 29.65
-
EXACT HSS 3.5 → 12.5mm Step Drill Bit, 10 Steps 5362
System Power Tool Accessories. Precision ground, HSS power tool accessories with 1/4" hexagon shanks Excellent non-slip characteristics when used in three-jaw chucks
1 products found
JPY: 8,460
USD: 53.03
-
EXACT HSS 3 → 13mm Step Drill Bit, 11 Steps 5361
System Power Tool Accessories. Precision ground, HSS power tool accessories with 1/4" hexagon shanks Excellent non-slip characteristics when used in three-jaw chucks
1 products found
JPY: 8,460
USD: 53.03
-
EXACT 05761 Deburring Tool 5761
Countersinks. Convenient hand tool for deburring holes in metal, wood and plastic Three-fluted construction with inclined angle of 90º
1 products found
JPY: 4,260
USD: 26.70
-
EXACT 2 Piece 3/8 in UNF HSS Hand Tap Set 1539
UNF-Thread Tap Set. One taper tap (with a 4° chamfer) and one plug tap (with 23° chamfer) per set Supplied in polypropylene tubes
1 products found
JPY: 7,240
USD: 45.38
-
EXACT HSS-E 2 → 20 mm 4 piece 90° Countersink Drill Bit Set 5426
HSS & TiN Coated Deburrs. Cutters with 90° angles designed for chatter-free deburring and chamfering on a variety of materials at production speeds.
1 products found
JPY: 26,300
USD: 164.86
-
HSS M3 71 mm Counterbore Drill Bit, 6mm Cutter Diameter, 5 mm Plain Shank 5841
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 3,310
USD: 20.75
-
EXACT HSS 6.3 → 20.5 mm 6 piece 90° Countersink Drill Bit Set 5527
Three-flute HSS Countersink Six Piece Set. 90° flutes made to DIN335C for use on most ferrous and non-ferrous materials 6, 8, 10, 12, 16, 20mm sizes in metal box
1 products found
JPY: 20,600
USD: 129.13
-
EXACT HSS 6 → 30mm Step Drill Bit 7003
Step drill with spiral flute. HSS step drill with deburring zone for a better circular cut For burr-free drilling and planing sheet metal, pipes and profiles Two-sided deburring in one move No centre-punching necessary, drill bits do not run Constant cutting angle during the whole process Suitable for construction steel, CrNi steel and non-ferrous metals up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck
1 products found
JPY: 19,500
USD: 122.23
-
EXACT 3 piece HSS Step Drill Set 4mm to 30mm 5332
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 29,800
USD: 186.80
-
EXACT 3 piece HSS Step Drill Set 4mm to 30mm 5331
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 43,100
USD: 270.17
-
EXACT HSS 9 → 36mm Step Drill Bit, 10 Steps, 3mm Max Drilling Thickness 5330
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 24,700
USD: 154.83
-
EXACT HSS 6 → 30mm Step Drill Bit, 13 Steps, 4mm Max Drilling Thickness 5329
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 16,700
USD: 104.68
-
EXACT HSS-E 84 mm 90° Countersink Drill Bit, 28mm Head Diameter 5424
Cross-hole countersink 90°. HSS-E cross-hole countersink with cylinder shaft Primarily for deburring Particularly suitable for high tension materials
1 products found
JPY: 11,000
USD: 68.95
-
EXACT HSS M3 → M10 Counterbore Set 5863
HSS Counterbores Set. Plain shank counterbores made to BS328 Part 5, ISO and DIN373 standards Storage box. Set Contents M3, M4, M5, M6, M8, and M10 (Counterbores also available individually)
1 products found
JPY: 29,900
USD: 187.43
-
HSS M10 100 mm Counterbore Drill Bit, 18mm Cutter Diameter, 12.5 mm Plain Shank 5846
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 6,530
USD: 40.93
-
HSS M8 100 mm Counterbore Drill Bit, 15mm Cutter Diameter, 12.5 mm Plain Shank 5845
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 6,140
USD: 38.49
-
HSS M6 80 mm Counterbore Drill Bit, 11mm Cutter Diameter, 8 mm Plain Shank 5844
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 3,390
USD: 21.25
-
HSS M5 80 mm Counterbore Drill Bit, 10mm Cutter Diameter, 8 mm Plain Shank 5843
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 3,190
USD: 20.00
-
HSS M4 71 mm Counterbore Drill Bit, 8mm Cutter Diameter, 5 mm Plain Shank 5842
HSS Individual Counterbores. Counterbores for cutting holes where a capscrew or fastener is required to sit flush or even below the level of the workpiece. Thread size is the size of the screw thread to sit within the hole and cutting diameter shows the size that will be cut for both the capscrew and head.
1 products found
JPY: 2,890
USD: 18.12
-
EXACT HSS 4 → 20mm Step Drill Bit, 9 Steps, 4mm Max Drilling Thickness 5328
Step drill, straight tap. HSS step drill with straight tap, two-edged For burr-free drilling and planing sheet metal, pipes and profiles No centre-punching necessary, drill bits do not run Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick Diameter specification is lasered on every level Three-faced driving shaft, prevents slipping in the drill chuck Sets delivered in a plastic case
1 products found
JPY: 11,600
USD: 72.71
-
EXACT Long Ratchet Tap Wrench M3 → M10 5043
Collet Ratchet - (Short & Long Reach). Collet type with forward/lock/reverse operation ratchet Ideal for use in difficult to access areas Plated finish
1 products found
JPY: 4,720
USD: 29.59
-
EXACT Long Ratchet Tap Wrench M5 → M12 5044
Collet Ratchet - (Short & Long Reach). Collet type with forward/lock/reverse operation ratchet Ideal for use in difficult to access areas Plated finish
1 products found
JPY: 5,580
USD: 34.98
-
EXACT Short Ratchet Tap Wrench Steel M5 → M12 5042
Collet Ratchet - (Short & Long Reach). Collet type with forward/lock/reverse operation ratchet Ideal for use in difficult to access areas Plated finish
1 products found
JPY: 3,850
USD: 24.13
-
EXACT Short Ratchet Tap Wrench Steel M3 → M10 5041
Collet Ratchet - (Short & Long Reach). Collet type with forward/lock/reverse operation ratchet Ideal for use in difficult to access areas Plated finish
1 products found
JPY: 3,010
USD: 18.87
-
EXACT Adjustable Tap Wrench Zinc Pressure Casting M4 → M12, 3/16 → 5/8 in BSW 4974
Tap & Reamer Wrench (Bar Type). Adjustable all steel tap/reamers with hardened and tempered V jaws for holding square/round shanks
1 products found
JPY: 2,590
USD: 16.24
-
EXACT Adjustable Tap Wrench Zinc Pressure Casting M3 → M12, 1/8 → 1/2 in BSW 4973
DIN 1814. Tap wrench, adjustable. Adjustable die-cast zinc tap wrench for direct application to hand taps
1 products found
JPY: 1,710
USD: 10.72
-
EXACT Adjustable Tap Wrench Zinc Pressure Casting M3 → M10, 1/8 → 3/8 in BSW 4972
Tap & Reamer Wrench (Bar Type). Adjustable all steel tap/reamers with hardened and tempered V jaws for holding square/round shanks
1 products found
JPY: 1,670
USD: 10.47
-
EXACT 30mm diameter Steel Die Holder, 280 mm 4935
DIN 225, EN22568. Cutting die holder. Die-cast zinc cutting die holder For holding cutting dies as per DIN 223, DIN 5158, EN 24230 and EN 24231
1 products found
JPY: 1,510
USD: 9.47
-
EXACT 7 Piece M10 HSS Combi Tap Set 5910
7 Piece Combination Tap and Drill Tool Kit. HSS combination tap and drill bit tool kits. For drilling core holes, tapping and deburring in a single pass. Suitable for construction steel, CrNi steel, non-ferrous metals and plastics. 7-Piece Kit. M3, M4, M5, M6, M8, M10 1/4-in. Receptacle Adapter Type: 05910
1 products found
JPY: 16,800
USD: 105.31
-
EXACT 25mm diameter Steel Die Holder, 224 mm 4934
Die Stock. Die stock for the fitting and turning of dies when cutting or repairing threads. Chemically blackened finish. Chromed handles
1 products found
JPY: 1,080
USD: 6.77
-
EXACT 20mm diameter Steel Die Holder, 200 mm 4933
DIN 225, EN22568. Cutting die holder. Die-cast zinc cutting die holder For holding cutting dies as per DIN 223, DIN 5158, EN 24230 and EN 24231
1 products found
JPY: 1,010
USD: 6.33
-
EXACT 38mm diameter Steel Die Holder, 315 mm 4937
DIN 225, EN22568. Cutting die holder. Die-cast zinc cutting die holder For holding cutting dies as per DIN 223, DIN 5158, EN 24230 and EN 24231
1 products found
JPY: 2,000
USD: 12.54
-
EXACT HSS M12 Thread Tap, 51 mm Length 5971
Cutting taps for special fine threads. HSS special cutting taps with a straight flute; for metric ISO fine threads DIN 13, tolerance 6H Profile ground and relief ground With a hex drive for working with socket bits and ratchet Short design for working in areas with limited accessibility Guide mandrel for thread drill holes Stock No: < 508-9610') 508-9610/ is a six piece set including the following:
1 products found
JPY: 4,700
USD: 29.46
-
EXACT HSS M4 Combination Thread Tap, 39 mm Length 5902
Single-Cut Tap, Combi Shaft, Metric. Features and Benefits. Combined HSS-G single-cut tap with spiral flute and 1/4" hex drive Deburring zone with edge breaker For core drilling, thread cutting and deburring in a single process Crosswise grinding, drills do not drill off-centre — even without centre-punching Suitable for construction steel, CrNi steel, non-ferrous metals and plastics
1 products found
JPY: 3,660
USD: 22.94
