[InvenSense]Electronic/Electrical Parts and Controll Equipments
Filters
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser, 100 → 15000 Hz -41 → -35dB INMP404ACEZ-R0
Analogue MEMS Microphone - INMP401 / INMP404, InvenSense. InvenSense MEMS microphones with an analogue output, offer the next generation of microphone they have features such as high SNR (Signal to Noise Ratio), low current consumption, bottom port locations, wide frequency response ranges and supplied in compact package sizes. INMP401 and INMP404 both contain the MEMS microphone, an impedance converter and an output amplifier. They are ideal for near and far field applications and the omnidirectional MEMs analog microphones INMP401 and INMP404 are intended for a range of mobile applications where low power and high acoustic overload point (AOP) are important such as mobile devices, digital video cameras, Bluetooth headsets, video phones and teleconferencing systems.. High SNR of 62 dBA Sensitivity -42 dBV (INMP401) Flat Frequency Response from 100 Hz to 15 kHz Low Current Consumption < 250 μA Single-Ended Analog Output High PSRR of 70 dB Compatible with Sn/Pb and Pb-Free Solder Processes RoHS/WEEE Compliant Complies with the TIA-920 Standard - Telecommunications INMP401 : 4.72 mm ´ 3.76 mm ´ 1 mm Sensitivity -42 dBV INMP404 : 3.35 mm ´ 2.5 mm ´ 0.88 mm High Sensitivity of −38 dBV
1 products found
JPY: 1,070
USD: 6.71
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser, 50 → 20000 Hz -27 → -25dB ICS-43432
Digital MEMS Microphone - ICS-43432, InvenSense. The ICS-43432 is a low-noise MEMS microphone with an I 2 S digital output. The InvenSense digital microphone ICS43432 has fully decimated outputs that allow them to be connected directly into microcontrollers (MCU) and DSPs. The device contains a MEMS sensor, an analog to digital converter, signal conditioning, decimation and anti-aliasing filters along with a 24-bit I 2 S interface. The digital microphone is bottom ported and has a high signal to noise ratio (SNR) along with a wideband frequency response It is also perfect when an audio codec design is not needed. The applications include wearables, remote controls, teleconferencing systems, gaming consoles, security systems, and microphone arrays.. Digital I 2 S Output Low Current Consumption: 1 mA SNR: 65 dBA 116 dB Maximum SPL (Acoustic Overload Point) Sensitivity Tolerance: ±1 dB Sensitivity: –26 dB Wide Frequency Response from 50 Hz to 20 kHz High Power Supply Rejection: −80 dB RoHS/WEEE Compliant Compatible with Sn/Pb and Pb-Free Solder Processes Dimension: 4mm ´ 3mm ´ 1mm
1 products found
JPY: 1,850
USD: 11.60
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser, 60 → 20000 Hz -40 → -36dB INMP510ACEZ-R0
Analogue MEMS Microphone - INMP504 / INMP510, InvenSense. InvenSense Analog ultra-low-noise INMP504 and RF-hardened INMP510 offer low power omnidirectional MEMS microphones with bottom ports. Both devices incorporate a MEMS microphone, an output amplifier and an impedance converter. Their sensitivity means they are ideal in either near field or far field. The two MEMS devices INMP504 and INMP510 are pin compatible in addition to this the functions and pins of the INMP504 are also suited to the INMP404 microphone and will present an easy upgrade path. The microphones are compact in size and feature high SNR along with extended wide frequency response. Typical applications include Smart phones, teleconferencing systems, security and surveillance, digital video cameras, Bluetooth headsets, tablet computers and Notebook PCs.. · Analog Output · Low Current Consumption: 180 μA · SNR: 65 dBA · Sensitivity: –38 dBV · RoHS/WEEE Compliant · Compatible with Sn/Pb and Pb-Free Solder Processes INMP504 Ultra-low MEMS Microphone Complies with the TIA-920 Telecommunications Telephone Terminal Equipment Transmission Requirements Extended Frequency Response from 100 Hz to 20 kHz PSR: -70 dBV 120 dB Maximum SPL Dimension: 3.35mm ´ 2.5mm ´ 0.88mm INMP510 RF Hardened MEMS Microphone Enhanced RF Performance Non-Inverted Signal Output Extended Frequency Response from 60 Hz to 20 kHz PSR: -78 dBV 124 dB Maximum SPL (Acoustic Overload Point) Sensitivity: ±2 dB Dimension: 3.35mm ´ 2.5mm ´ 0.98mm
1 products found
JPY: 1,310
USD: 8.21
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser, 28 → 20000 Hz -48 → -44dB INMP411ACEZ-R0
Analogue MEMS Microphone - INMP411, InvenSense. The InvenSense INMP411 high SPL microphone presents a low noise, low power bottom port device with an analog output. The MEMS microphone has a linear response up to 131dB SPL it also incorporates an impedance converter and an output amplifier. Featuring high SNR (Signal to Noise Ratio), extended wideband frequency response and it is pin compatible with the IMP401. This omnidirectional (omni) microphone is Ideal in near and far field applications also a range of products like digital video cameras, Bluetooth headsets, tablet computers, fire and safety radios and teleconferencing systems.. 131 dB SPL Acoustic Overload Point (AOP) Sensitivity of −46 dBV ±2 dB Sensitivity Tolerance Omnidirectional Response High SNR of 62 dBA Extended Frequency Response from 28 Hz to 20 kHz Low Current Consumption: < 250 μA Single-Ended Analog Output High PSR of −80 dB Compatible with Sn/Pb and Pb-Free Solder Processes Dimensions: 4.72 mm ´ 3.76 mm ´ 1 mm
1 products found
JPY: 1,810
USD: 11.35
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser, 100 → 20000 Hz -41 → -35dB INMP504ACEZ-R0
Analogue MEMS Microphone - INMP504 / INMP510, InvenSense. InvenSense Analog ultra-low-noise INMP504 and RF-hardened INMP510 offer low power omnidirectional MEMS microphones with bottom ports. Both devices incorporate a MEMS microphone, an output amplifier and an impedance converter. Their sensitivity means they are ideal in either near field or far field. The two MEMS devices INMP504 and INMP510 are pin compatible in addition to this the functions and pins of the INMP504 are also suited to the INMP404 microphone and will present an easy upgrade path. The microphones are compact in size and feature high SNR along with extended wide frequency response. Typical applications include Smart phones, teleconferencing systems, security and surveillance, digital video cameras, Bluetooth headsets, tablet computers and Notebook PCs.. · Analog Output · Low Current Consumption: 180 μA · SNR: 65 dBA · Sensitivity: –38 dBV · RoHS/WEEE Compliant · Compatible with Sn/Pb and Pb-Free Solder Processes INMP504 Ultra-low MEMS Microphone Complies with the TIA-920 Telecommunications Telephone Terminal Equipment Transmission Requirements Extended Frequency Response from 100 Hz to 20 kHz PSR: -70 dBV 120 dB Maximum SPL Dimension: 3.35mm ´ 2.5mm ´ 0.88mm INMP510 RF Hardened MEMS Microphone Enhanced RF Performance Non-Inverted Signal Output Extended Frequency Response from 60 Hz to 20 kHz PSR: -78 dBV 124 dB Maximum SPL (Acoustic Overload Point) Sensitivity: ±2 dB Dimension: 3.35mm ´ 2.5mm ´ 0.98mm
1 products found
JPY: 1,090
USD: 6.83
-
［Discontinued］MPU-6000 InvenSense, 6-Axis Motion Sensor Module, I2C, SPI, 24-Pin QFN MPU-6000
Motion Tracking Device MPU-6000,6 Axis, InvenSense. InvenSense MPU-6000 ™ 6-axis I 2 C motion processor combines a 3-axis gyroscope and a 3-axis accelerometer alongside an onboard Digital Motion Processor (DMP) all on one device. The motion processing unit features programmable gyroscope and accelerometer designed for accuracy in fast and slow motion tracking. The MEMS motion tracking device MPU-6000 incorporates MotionFusion algorithms which will also access external sensors via the auxiliary master I 2 C bus, The MPU-6000 is widely used in smartphones, tablets and wearable sensor technology. Supports SPI at up to 20MHz in addition to I 2 C User programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) User programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g Dimensions: 4 mm x 4 mm x 0.9 mm (QFN package)
1 products found
JPY: 1,870
USD: 11.72
-
［Discontinued］MPU-6050 InvenSense, 6-Axis Motion Sensor Module, I2C, 24-Pin QFN MPU-6050
Motion Tracking Device MPU-6050,6 Axis, InvenSense. The InvenSense intelligent sensor MPU-6050 ™ 6-axis I 2 C motion processor incorporates a 3-axis gyroscope and a 3-axis accelerometer along with a Digital Motion Processor (DMP) all on one system-on-chip device. The MEMS motion tracking device features programmable gyroscope and accelerometer designed for fast and slow motion precision tracking. The motion processing unit MPU-6050 incorporates MotionFusion algorithms which will also access external sensors and magnetometers through the auxiliary master I 2 C bus. The MPU-6050 applications include wearable sensors, tablets and smartphones. The InvenSense MotionAppsTM Platform will extract the motions that are associated and unload the sensor management from the operating system to provide an application program interface (API).. Supports I 2 C communications: up to 400 kHz User-programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) User-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g MotionApps™ Platform support for Android, Linux, and Window Dimensions: 4 mm x 4 mm x 0.9 mm (QFN package) VLOGIC/VDD: 1.8V±5% Gyro and Accelerometer operating current: 3.8mA RoHS/WEEE Compliant Full chip idle mode supply current: 5μA
1 products found
JPY: 1,250
USD: 7.84
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser -45 → -39dB INMP401ACEZ-R0
Analogue MEMS Microphone - INMP401 / INMP404, InvenSense. InvenSense MEMS microphones with an analogue output, offer the next generation of microphone they have features such as high SNR (Signal to Noise Ratio), low current consumption, bottom port locations, wide frequency response ranges and supplied in compact package sizes. INMP401 and INMP404 both contain the MEMS microphone, an impedance converter and an output amplifier. They are ideal for near and far field applications and the omnidirectional MEMs analog microphones INMP401 and INMP404 are intended for a range of mobile applications where low power and high acoustic overload point (AOP) are important such as mobile devices, digital video cameras, Bluetooth headsets, video phones and teleconferencing systems.. High SNR of 62 dBA Sensitivity -42 dBV (INMP401) Flat Frequency Response from 100 Hz to 15 kHz Low Current Consumption < 250 μA Single-Ended Analog Output High PSRR of 70 dB Compatible with Sn/Pb and Pb-Free Solder Processes RoHS/WEEE Compliant Complies with the TIA-920 Standard - Telecommunications INMP401 : 4.72 mm ´ 3.76 mm ´ 1 mm Sensitivity -42 dBV INMP404 : 3.35 mm ´ 2.5 mm ´ 0.88 mm High Sensitivity of −38 dBV
1 products found
JPY: 55,300
USD: 346.64
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser -41 → -35dB INMP404ACEZ-R0
Analogue MEMS Microphone - INMP401 / INMP404, InvenSense. InvenSense MEMS microphones with an analogue output, offer the next generation of microphone they have features such as high SNR (Signal to Noise Ratio), low current consumption, bottom port locations, wide frequency response ranges and supplied in compact package sizes. INMP401 and INMP404 both contain the MEMS microphone, an impedance converter and an output amplifier. They are ideal for near and far field applications and the omnidirectional MEMs analog microphones INMP401 and INMP404 are intended for a range of mobile applications where low power and high acoustic overload point (AOP) are important such as mobile devices, digital video cameras, Bluetooth headsets, video phones and teleconferencing systems.. High SNR of 62 dBA Sensitivity -42 dBV (INMP401) Flat Frequency Response from 100 Hz to 15 kHz Low Current Consumption < 250 μA Single-Ended Analog Output High PSRR of 70 dB Compatible with Sn/Pb and Pb-Free Solder Processes RoHS/WEEE Compliant Complies with the TIA-920 Standard - Telecommunications INMP401 : 4.72 mm ´ 3.76 mm ´ 1 mm Sensitivity -42 dBV INMP404 : 3.35 mm ´ 2.5 mm ´ 0.88 mm High Sensitivity of −38 dBV
1 products found
JPY: 48,100
USD: 301.51
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser, 60 → 15000 Hz -45 → -39dB INMP401ACEZ-R0
Analogue MEMS Microphone - INMP401 / INMP404, InvenSense. InvenSense MEMS microphones with an analogue output, offer the next generation of microphone they have features such as high SNR (Signal to Noise Ratio), low current consumption, bottom port locations, wide frequency response ranges and supplied in compact package sizes. INMP401 and INMP404 both contain the MEMS microphone, an impedance converter and an output amplifier. They are ideal for near and far field applications and the omnidirectional MEMs analog microphones INMP401 and INMP404 are intended for a range of mobile applications where low power and high acoustic overload point (AOP) are important such as mobile devices, digital video cameras, Bluetooth headsets, video phones and teleconferencing systems.. High SNR of 62 dBA Sensitivity -42 dBV (INMP401) Flat Frequency Response from 100 Hz to 15 kHz Low Current Consumption < 250 μA Single-Ended Analog Output High PSRR of 70 dB Compatible with Sn/Pb and Pb-Free Solder Processes RoHS/WEEE Compliant Complies with the TIA-920 Standard - Telecommunications INMP401 : 4.72 mm ´ 3.76 mm ´ 1 mm Sensitivity -42 dBV INMP404 : 3.35 mm ´ 2.5 mm ´ 0.88 mm High Sensitivity of −38 dBV
1 products found
JPY: 1,160
USD: 7.27
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser -27 → -25dB ICS-43432
Digital MEMS Microphone - ICS-43432, InvenSense. The ICS-43432 is a low-noise MEMS microphone with an I 2 S digital output. The InvenSense digital microphone ICS43432 has fully decimated outputs that allow them to be connected directly into microcontrollers (MCU) and DSPs. The device contains a MEMS sensor, an analog to digital converter, signal conditioning, decimation and anti-aliasing filters along with a 24-bit I 2 S interface. The digital microphone is bottom ported and has a high signal to noise ratio (SNR) along with a wideband frequency response It is also perfect when an audio codec design is not needed. The applications include wearables, remote controls, teleconferencing systems, gaming consoles, security systems, and microphone arrays.. Digital I 2 S Output Low Current Consumption: 1 mA SNR: 65 dBA 116 dB Maximum SPL (Acoustic Overload Point) Sensitivity Tolerance: ±1 dB Sensitivity: –26 dB Wide Frequency Response from 50 Hz to 20 kHz High Power Supply Rejection: −80 dB RoHS/WEEE Compliant Compatible with Sn/Pb and Pb-Free Solder Processes Dimension: 4mm ´ 3mm ´ 1mm
1 products found
JPY: 8,110,000
USD: 50,836.83
-
［Discontinued］InvenSense Omni-Directional Surface Mount Microphone Condenser, 45 → 20000 Hz -48 → -44dB INMP621ACEZ-R0
Digital MEMS Microphone - INMP621, InvenSense. The INMP621 bottom port MEMS microphone has high pressure level (SPL) 133 dB, low power consumption along with a PDM digital output. The omnidirectional microphone incorporates a MEMS element, impedance converter and a fourth order modulator all in one compact package. The digital PDM output allows two microphones to be interfaced on a single data line. The InvenSense INMP621 provides an easy upgrade path due to its pin compatibility with the INMP521 microphone. This device has many features such as wide range frequency response alongside sleep mode which will permit a longer battery life for portable applications. Also Ideal for tablet, digital still and video cameras, Bluetooth headset, microphone arrays and security and surveillance applications.. Digital PDM output Omnidirectional response Signal to Noise Ratio (SNR): 65 dBA 133 dB SPL Acoustic Overload Point (AOL) Power Supply Rejection (PSR): -100 dBFS Sensitivity: –46 dB Sensitivity Tolerance: ±2 dB Low current consumption: 1.2mA Extended frequency response from 45 Hz to 20 kHz Sleep Mode for Extended Battery Life, 5.5 μA consumption RoHS/WEEE compliant Compatible with Sn/Pb and Pb-Free solder processes Dimension: 4mm ´ 3mm ´ 1mm
1 products found
JPY: 1,570
USD: 9.84
