Trumeter

Trumeter LCD Digital Ammeter 4-Digits AC, DC 1 % -10°C to +60°C, 68 x 68 mm　APM-AMP-APO

All Trumeter products come with a 3 year manufacturer's warranty. APM Digital AMP Meter. The Trumeter APM is the most visible, easy to use, multi-format, programmable panel meter on the market. The APM Digital AMP meter features a 5A direct current measuring input that is suitable for use with current transformers up to 1000 A. It features a programmable bar graph scale that allows both minimum and maximum values to be set, enabling you to allow for the scale you require. The set-points on the AMP meter are alarmed, making it easy to know when critical point has been reached. The meters display can be programmed to change colour, flash, change annunciator message or have a combination of all three, depending on your needs. The digital meter can also be easily programmed to trip when values exceed, are lower than, are between or are outside set-points. Features and Benefits. Large 4-digit LCD Display 40 Segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information Dynamic backlight colour- user adjustable brightness and colour Wide viewing angle 1% accuracy 5A direct input Custom annunciators Minimum ; maximum value display range 2 Independent alarm set-points 2 Independent outputs (output models only) 4-20 mA analogue monitor output (output models only) USB port to connect to PC for custom user settings IP65 protection. Models. 815-8312 815-8312 negative LCD display 815-8315 815-8315 positive LCD display 815-8318 815-8318 positive LCD display with outputs 815-8321 815-8321 negative LCD display with outputs

Trumeter

Trumeter 6 Digit, LCD, Digital Counter, 10kHz, 2.6 → 3.4 V dc　7000

DIN40050. UL. All Trumeter products come supplied with a 3 year manufacturer's warranty. TRUMETER 6 Digit Low Power Totalising Counter. Trumeter 7000 provides the user with a PCB mounting or panel mounting solution thanks to the 0.1" (2.54mm) pitch pins for connection. Supplied in a clear polycarbonate finish with a bezel for panel mounting. Suitable for PCB mounting, or panel mounting using the bezel supplied Unit can be configured to operate from a contact closure signal (requires external components to be fitted) Low power consumption suitable for battery operation TTL/CMOS compatible IP40 rated

Trumeter

Trumeter Encoder Wheel Circumference 50cm, 7mm Wheel Bore Rubber Covered Plastic　7574

Plastic Measuring Wheel. Trumeter plastic measuring wheel with a rubber covered finish. Supplied with a 16mm width 500mm circumference Compatible with Trumeter 3602 series of counters ( ; 815-8346 815-8346 , ; 815-8340 815-8340 , ; 815-8378 815-8378 ; ; 815-8374 815-8374 )

Trumeter

Trumeter Shunt Meter DC, LCD Display 4-Digits 0.1 %, 68 x 68 mm　APM-SHUNT-ANO

APM Shunt Meter. Trumeter APM meters are the most visible, easy to use, multi-format, programmable panel meters on the market. The APM Shunt Meter is ideal for use in a range of applications where accurate DC current measurement is required. The programmable scale and custom annunciators mean that users can tailor the meter to display their critical parameters exactly how they want. The two outputs can be used to connect the shunt meter to other systems in the process, making this meter more than just a display. Features and Benefits. Large 4-digit, 12 mm display Dynamic backlight colour User-adjustable backlight brightness and colour Wide viewing angle 40 segment bar graph display Separate Starburst display area for annunciators, custom messages and alarm information Custom annunciators 2 independent Alarm set-points 2 independent outputs Easy to use software by plugging into USB port on a PC 0-1 V dc input range 4-20 mA analogue monitor output IP65 (front panel) protection. Applications. Marine Leisure Material Handling Power Supplies Load Banks Charging systems

Trumeter

Trumeter LCD Digital Panel Ammeter 4-Digits DC 0.5 % -10°C to 60°C, 68 x 68 mm　APM-CT-APO

APM Digital CT Meter. Trumeter APM meters are the most visible, easy to use, multi-format, programmable panel meters on the market. The APM CT Meter measures up to 10000 Amps, when used with an external current transformer. It also includes a range of features, such as custom annunciators, set-points and dynamic backlighting. With a programmable scale and custom annunciators, the meter can be custom tailored to display your critical parameters exactly how you want. The two outputs can be used to connect the CT meter to other systems in the process, making this meter more than just a display. Features and Benefits. Large 4-digit LCD Display 40 Segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information Dynamic backlight colour- user adjustable brightness and colour Wide viewing angle 5A CT input Custom annunciators Min ; max value display range 2 Independent programmable alarm set-points 2 Independent programmable outputs 4-20 mA analogue monitor output USB port to connect to PC for custom user settings IP65 protection

Trumeter

Trumeter LCD Digital Ammeter 4-Digits AC, DC 1 % -10°C to 60°C,　APM-AMP-ANO

All Trumeter products come with a 3 year manufacturer's warranty. APM Digital AMP Meter. The Trumeter APM is the most visible, easy to use, multi-format, programmable panel meter on the market. The APM Digital AMP meter features a 5A direct current measuring input that is suitable for use with current transformers up to 1000 A. It features a programmable bar graph scale that allows both minimum and maximum values to be set, enabling you to allow for the scale you require. The set-points on the AMP meter are alarmed, making it easy to know when critical point has been reached. The meters display can be programmed to change colour, flash, change annunciator message or have a combination of all three, depending on your needs. The digital meter can also be easily programmed to trip when values exceed, are lower than, are between or are outside set-points. Features and Benefits. Large 4-digit LCD Display 40 Segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information Dynamic backlight colour- user adjustable brightness and colour Wide viewing angle 1% accuracy 5A direct input Custom annunciators Minimum ; maximum value display range 2 Independent alarm set-points 2 Independent outputs (output models only) 4-20 mA analogue monitor output (output models only) USB port to connect to PC for custom user settings IP65 protection. Models. 815-8312 815-8312 negative LCD display 815-8315 815-8315 positive LCD display 815-8318 815-8318 positive LCD display with outputs 815-8321 815-8321 negative LCD display with outputs

Trumeter

Mechanical Counter Trumeter 3602-021610-611A 6 digits　3602-021610-611A

Mechanical Totalising Counter. Trumeter 3602 series of mechanical totalising counters are a robustly constructed solution to high speed continuous operation applications. 6 digit display with 6.4mm digit height Offers up to 3000 counts perminute with a 1:1 gear ratio Lever reset function which can reset to zero Retains accurate high speed operation thanks to double oil impregnation of the shaft Robust stainless steel base with grey ABS covered design, coupled with sophisticated lubrication methods provide the user a long term trouble free solution to their counting application Compatible with counting wheel ; 815-8387 815-8387

Trumeter

Trumeter 8 Digit, LCD, Digital Counter, 10kHz, 3.6 V Battery　7111-RS

Backlight requires external supply All Trumeter products come with a 3 year manufacturer's warranty. Self Powered Totalisers. Trumeter bi-directional totalising counters offer a premium feature-packed product which is cost-effective. Offers simple installation thanks to screw connections located on the back of the unit. 8 digit LCD display with 9mm character height Front reset function can be disabled to prevent accidental or un-approved resetting Front panel can be sealed to IP65/NEMA4X Typical uses are where external power is not readily available - event counting, position, length, rotation and distance measuring applications Provides the user with a viable alternaltive to an electro-mechanical counter 7111HV ( RS Stock No. ; 815-8359 815-8359 ) offers an additional feature of permitting triggering from any voltage source between 10-240V AC or 5-110V DC ±10%

Trumeter

Trumeter 4 Digit, LCD, Digital Counter, 10kHz, 3 V dc　HED251-T

All Trumeter products come with a 3 year manufacturer's warranty. 10mm, 4 Digit Counter with Reset Function. Provides the user with a resettable counter which can be installed quickly via two spring clips which are integral to the housing. 1//32 DIN housing - 24 x 48 mm Counts low speed signals such as contact closure pulses Leading zero suppression Rear connection via one 5-way plug connector Counting input: N/O contact or open collector, negative edge triggered, threshold voltage 0.7V, max. 18V Maximum count frequency 10Hz, min. pulse length 25ms Reset input: as counting input

Trumeter

Trumeter 8 Digit, LCD, Digital Counter, 10kHz, 10 → 240 V ac, 5 → 110 V dc　7111HV-RS

Backlight requires external supply All Trumeter products come with a 3 year manufacturer's warranty. Self Powered Totalisers. Trumeter bi-directional totalising counters offer a premium feature-packed product which is cost-effective. Offers simple installation thanks to screw connections located on the back of the unit. 8 digit LCD display with 9mm character height Front reset function can be disabled to prevent accidental or un-approved resetting Front panel can be sealed to IP65/NEMA4X Typical uses are where external power is not readily available - event counting, position, length, rotation and distance measuring applications Provides the user with a viable alternaltive to an electro-mechanical counter 7111HV ( RS Stock No. ; 815-8359 815-8359 ) offers an additional feature of permitting triggering from any voltage source between 10-240V AC or 5-110V DC ±10%

Trumeter

Mechanical Counter Trumeter 3602-192TG 6 digits Top Going　3602-192TG

Top Going Mechanical Counter. Trumeter 3602 series of mechanical totalising counters are a robustly constructed solution to high speed continuous operation applications. 6 digit display with 6.4mm digit height Offers up to 3000 counts perminute with a 2:1 gear ratio Lever reset function which can reset to zero Retains accurate high speed operation thanks to double oil impregnation of the shaft Robust stainless steel base with grey ABS covered design, coupled with sophisticated lubrication methods provide the user a long term trouble free solution to their counting application Compatible with counting wheel ; 815-8387 815-8387

Trumeter

Trumeter APM-PROC-APO , LCD Digital Panel Multi-Function Meter for Current, Voltage, 68mm x 68mm　APM-PROC-APO

APM Digital Process Meter. Trumeter APM meters are the most visible, easy to use, multi-format, programmable panel meters on the market. The APM digital process meter utilises user-configurable, non-linearization techniques which can customise performance; the non-linear sensors (such as thermocouples) can now be used to maximum potential. The meter offers a programmable scale and custom annunciators, which means you can tailor it to display critical parameters exactly how you want. The dynamic back lighting, with set points, means that operators are visually alerted when a parameter is out of range. The two outputs can be used to connect the Process meter to other systems in the process, making this meter more than just a display. Features and Benefits. Large 4-digit LCD display 40 segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information User-adjustable back light brightness, colour and intensity Wide viewing angle Custom annunciators 2 Independent outputs 2 Independent alarm set-points 0-10 V, 0-50 mA input range 4-20 mA analogue monitor output USB port to connect to PC for custom user settings Use configurable non-linearization table IP65 protection

Trumeter

Trumeter APM-PROC-ANO , LCD Digital Panel Multi-Function Meter for Current, Voltage, 68mm x 68mm　APM-PROC-ANO

APM Digital Process Meter. Trumeter APM meters are the most visible, easy to use, multi-format, programmable panel meters on the market. The APM digital process meter utilises user-configurable, non-linearization techniques which can customise performance; the non-linear sensors (such as thermocouples) can now be used to maximum potential. The meter offers a programmable scale and custom annunciators, which means you can tailor it to display critical parameters exactly how you want. The dynamic back lighting, with set points, means that operators are visually alerted when a parameter is out of range. The two outputs can be used to connect the Process meter to other systems in the process, making this meter more than just a display. Features and Benefits. Large 4-digit LCD display 40 segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information User-adjustable back light brightness, colour and intensity Wide viewing angle Custom annunciators 2 Independent outputs 2 Independent alarm set-points 0-10 V, 0-50 mA input range 4-20 mA analogue monitor output USB port to connect to PC for custom user settings Use configurable non-linearization table IP65 protection

Trumeter

Trumeter Digital Voltmeter, LCD Display 4-Digits 1 %, 68 x 68 mm　APM-VOLT-ANO

All Trumeter products come with a 3 year manufacturer's warranty. APM Digital Panel Voltmeter. The Trumeter APM is the most visible, easy to use, multi-format, programmable panel meter on the market. The APM Digital panel voltmeter provides a flexible voltage measuring input, capable of measuring both AC and DC voltages. Easy to install, it also automatically detects AC or DC signals, boasting input ranges of 600 V dc or 528 V ac. The voltmeter is supplied with an easily programmable scale that allows you to set a bar graph scale to your own specifications. It also has 15 built-in configurations that allow you to programme centre zero, positive and negative scales. Features and Benefits. Large 4-digit LCD display 40 segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information User-adjustable back light brightness, colour and intensity 1% accuracy Wide viewing angle Custom annunciators 2 Independent outputs (output models only) 2 Independent alarm set-points 00-600 V dc, 0-528 V ac input range 4-20 mA analogue monitor output (output models only) USB port to connect to PC for custom user settings IP65 protection

Trumeter

Trumeter Digital Voltmeter, LCD Display 4-Digits 1 %, 68 x 68 mm　APM-VOLT-APO

All Trumeter products come with a 3 year manufacturer's warranty. APM Digital Panel Voltmeter. The Trumeter APM is the most visible, easy to use, multi-format, programmable panel meter on the market. The APM Digital panel voltmeter provides a flexible voltage measuring input, capable of measuring both AC and DC voltages. Easy to install, it also automatically detects AC or DC signals, boasting input ranges of 600 V dc or 528 V ac. The voltmeter is supplied with an easily programmable scale that allows you to set a bar graph scale to your own specifications. It also has 15 built-in configurations that allow you to programme centre zero, positive and negative scales. Features and Benefits. Large 4-digit LCD display 40 segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information User-adjustable back light brightness, colour and intensity 1% accuracy Wide viewing angle Custom annunciators 2 Independent outputs (output models only) 2 Independent alarm set-points 00-600 V dc, 0-528 V ac input range 4-20 mA analogue monitor output (output models only) USB port to connect to PC for custom user settings IP65 protection

Trumeter

Trumeter APM-FREQ-APN , LCD Digital Panel Multi-Function Meter for Frequency, 68mm x 68mm　APM-FREQ-APN

All Trumeter products come with a 3 year manufacturer's warranty. APM Digital Frequency Meter. The Trumeter APM is the most visible, easy to use, multi-format, programmable panel meter on the market. The APM digital frequency meter is the most easy-to-use programmable frequency meter on the market. It boasts excellent visibility with 15 built-in configurations and is highly customisable for your requirements. The meter allows AC frequencies of up to 400 Hz to be measured directly by the meter itself. It can also accurately measure DC pulses after a simply configuration using the software- which is free to download from Trumeter. The features of this APM frequency meter make it a suitable choice in many applications, including mains, industrial and aviation. Features and Benefits. Large 4-digit LCD display 40 segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information User-adjustable back light brightness, colour and intensity 0.1% accuracy Wide viewing angle Custom annunciators 2 Independent outputs (output models only) 2 Independent alarm set-points 0-400 Hz input range 4-20 mA analogue monitor output USB port to connect to PC for custom user settings IP65 protection

Trumeter

Trumeter APM-FREQ-APO , LCD Digital Panel Multi-Function Meter for Frequency, 68mm x 68mm　APM-FREQ-APO

All Trumeter products come with a 3 year manufacturer's warranty. APM Digital Frequency Meter. The Trumeter APM is the most visible, easy to use, multi-format, programmable panel meter on the market. The APM digital frequency meter is the most easy-to-use programmable frequency meter on the market. It boasts excellent visibility with 15 built-in configurations and is highly customisable for your requirements. The meter allows AC frequencies of up to 400 Hz to be measured directly by the meter itself. It can also accurately measure DC pulses after a simply configuration using the software- which is free to download from Trumeter. The features of this APM frequency meter make it a suitable choice in many applications, including mains, industrial and aviation. Features and Benefits. Large 4-digit LCD display 40 segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information User-adjustable back light brightness, colour and intensity 0.1% accuracy Wide viewing angle Custom annunciators 2 Independent outputs (output models only) 2 Independent alarm set-points 0-400 Hz input range 4-20 mA analogue monitor output USB port to connect to PC for custom user settings IP65 protection

Trumeter

Trumeter APM-FREQ-ANO , LCD Digital Panel Multi-Function Meter for Frequency, 68mm x 68mm　APM-FREQ-ANO

All Trumeter products come with a 3 year manufacturer's warranty. APM Digital Frequency Meter. The Trumeter APM is the most visible, easy to use, multi-format, programmable panel meter on the market. The APM digital frequency meter is the most easy-to-use programmable frequency meter on the market. It boasts excellent visibility with 15 built-in configurations and is highly customisable for your requirements. The meter allows AC frequencies of up to 400 Hz to be measured directly by the meter itself. It can also accurately measure DC pulses after a simply configuration using the software- which is free to download from Trumeter. The features of this APM frequency meter make it a suitable choice in many applications, including mains, industrial and aviation. Features and Benefits. Large 4-digit LCD display 40 segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information User-adjustable back light brightness, colour and intensity 0.1% accuracy Wide viewing angle Custom annunciators 2 Independent outputs (output models only) 2 Independent alarm set-points 0-400 Hz input range 4-20 mA analogue monitor output USB port to connect to PC for custom user settings IP65 protection

Trumeter

Trumeter APM-FREQ-ANN , LCD Digital Panel Multi-Function Meter for Frequency, 68mm x 68mm　APM-FREQ-ANN

All Trumeter products come with a 3 year manufacturer's warranty. APM Digital Frequency Meter. The Trumeter APM is the most visible, easy to use, multi-format, programmable panel meter on the market. The APM digital frequency meter is the most easy-to-use programmable frequency meter on the market. It boasts excellent visibility with 15 built-in configurations and is highly customisable for your requirements. The meter allows AC frequencies of up to 400 Hz to be measured directly by the meter itself. It can also accurately measure DC pulses after a simply configuration using the software- which is free to download from Trumeter. The features of this APM frequency meter make it a suitable choice in many applications, including mains, industrial and aviation. Features and Benefits. Large 4-digit LCD display 40 segment bar graph display Separate starburst display area for annunciators, custom messages and alarm information User-adjustable back light brightness, colour and intensity 0.1% accuracy Wide viewing angle Custom annunciators 2 Independent outputs (output models only) 2 Independent alarm set-points 0-400 Hz input range 4-20 mA analogue monitor output USB port to connect to PC for custom user settings IP65 protection

Trumeter

Mechanical Counter Trumeter 3602-021610-611B 6 digits　3602-021610-611B

Mechanical Totalising Counter. Trumeter 3602 series of mechanical totalising counters are a robustly constructed solution to high speed continuous operation applications. 6 digit display with 6.4mm digit height Offers up to 3000 counts perminute with a 1:1 gear ratio Lever reset function which can reset to zero Retains accurate high speed operation thanks to double oil impregnation of the shaft Robust stainless steel base with grey ABS covered design, coupled with sophisticated lubrication methods provide the user a long term trouble free solution to their counting application Compatible with counting wheel ; 815-8387 815-8387

Trumeter

Trumeter Encoder Wheel Circumference 25cm Aluminium　015731-01

Cable ; Wire Measuring Machine. Sturdy cast aluminium body compatible with both top coming and top going mechanical counters. Suitable for measuring wire and cable up to 15mm diamater Continuous operation up to 300m/min Compatible with Trumeter top coming ( RS Stock No's ; 815-8368 815-8368 ; ; 815-8374 815-8374 ) and top going counters ( RS Stock No's ; 815-8365 815-8365 ; ; 815-8362 815-8362 )

Trumeter

Mechanical Counter Trumeter 2701-11MCG 5 digits Top Going　2701-11MCG

All Trumeter products come with a 3 year manufacturer's warranty. Top Going Mechanical Length Measure Unit. Trumeter mechanical length measuring units provides the user with an accurate, heavy duty instrument which can be used within a comprehensive range of applications. 6 digit display with 6.4mm digit height Supports a maximum speed of 3000 rpm Various units of measure including: Feet ; Inches Yeards ; Eigths Meters ; Centimeters All variants within the range offer the facility to be positioned at any angle with a hinged fixing for added freedom for installation Compatible with Trumeter 3602 series counters ( RS Stock No's ; 815-8346 815-8346 ; ; 815-8340 815-8340 )

Trumeter

Mechanical Counter Trumeter 2300-11MCG 5 digits Top Going　2300-11MCG

All Trumeter products come with a 3 year manufacturer's warranty. Top Going Mechanical Length Measure Unit. Trumeter mechanical length measuring units provides the user with an accurate, heavy duty instrument which can be used within a comprehensive range of applications. 6 digit display with 6.4mm digit height Supports a maximum speed of 3000 rpm Various units of measure including: Feet ; Inches Yeards ; Eigths Meters ; Centimeters All variants within the range offer the facility to be positioned at any angle with a hinged fixing for added freedom for installation Compatible with Trumeter 3602 series counters ( RS Stock No's ; 815-8346 815-8346 ; ; 815-8340 815-8340 )

Trumeter

Mechanical Counter Trumeter 2300-11MCC 5 digits Top Coming　2300-11MCC

All Trumeter products come with a 3 year manufacturer's warranty. Top Coming Mechanical Length Measure Unit. Trumeter mechanical length measuring units provides the user with an accurate, heavy duty instrument which can be used within a comprehensive range of applications. 6 digit display with 6.4mm digit height Supports a maximum speed of 3000 rpm Various units of measure including: Feet ; Inches Yeards ; Eigths Meters ; Centimeters All variants within the range offer the facility to be positioned at any angle with a hinged fixing for added freedom for installation Compatible with Trumeter 3602 series counters ( RS Stock No's ; 815-8346 815-8346 ; ; 815-8340 815-8340 )

Trumeter