[KTR]RS Components
Filters
-
KTR Coupling ROTEX14-92SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 1,910
USD: 11.97
-
KTR Coupling ROTEX14-98SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 1,900
USD: 11.91
-
KTR Coupling ROTEX19-92SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 2,650
USD: 16.61
-
KTR 30mm OD Jaw Coupling ROTEX14PB-ALIHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 4,740
USD: 29.71
-
KTR 30mm OD Coupling With Set Screw Fastening ROTEX14-Complete-KTR
KTR Jaw Couplings - Complete. A complete torsionally flexible coupling comprising of two hubs and a polyurethane (T-PUR®) spider. Available in various sizes from 14 to 48 (See Similar products listing). The T-PUR® spider provides damping to reduce shock and vibration transmitted through the system and offers improved heat resistance and service life compared to standard polyurethane spiders. Jaw couplings can be used to correct for small angular, axial and parallel mis-alignments and are suitable for applications with high bearing loads, inertia and high RPM. T-PUR spider for improved heat resistance and long life. ATEX 95 approved Maximum torsional angle 5°
1 products found
JPY: 11,400
USD: 71.46
-
KTR 41mm OD Jaw Coupling ROTEX19PB-ALIUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 5,120
USD: 32.09
-
KTR 41mm OD Jaw Coupling ROTEX19PB-STHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 6,500
USD: 40.75
-
KTR 95mm OD Coupling With Set Screw Fastening ROTEX42-Complete-KTR
KTR Jaw Couplings - Complete. A complete torsionally flexible coupling comprising of two hubs and a polyurethane (T-PUR®) spider. Available in various sizes from 14 to 48 (See Similar products listing). The T-PUR® spider provides damping to reduce shock and vibration transmitted through the system and offers improved heat resistance and service life compared to standard polyurethane spiders. Jaw couplings can be used to correct for small angular, axial and parallel mis-alignments and are suitable for applications with high bearing loads, inertia and high RPM. T-PUR spider for improved heat resistance and long life. ATEX 95 approved Maximum torsional angle 5°
1 products found
JPY: 75,600
USD: 473.89
-
KTR Barrel Gear Coupling Hub BOWEXM14-COMPLETE BOWEXM14-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 12,800
USD: 80.24
-
KTR Barrel Gear Coupling Hub BOWEXM19-COMPLETE BOWEXM19-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 16,200
USD: 101.55
-
KTR Barrel Gear Coupling Hub BOWEXM24-COMPLETE BOWEXM24-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 19,400
USD: 121.61
-
KTR Barrel Gear Coupling Hub BOWEXM28-COMPLETE BOWEXM28-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 28,700
USD: 179.90
-
KTR Barrel Gear Coupling Hub BOWEXM32-COMPLETE BOWEXM32-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 35,400
USD: 221.90
-
KTR Barrel Gear Coupling Hub BOWEXM38-COMPLETE BOWEXM38-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 43,200
USD: 270.80
-
KTR Barrel Gear Coupling Hub BOWEXM42-COMPLETE BOWEXM42-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 68,000
USD: 426.25
-
KTR Barrel Gear Coupling Hub BOWEXM48-COMPLETE BOWEXM48-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 63,900
USD: 400.55
-
KTR Barrel Gear Coupling Hub BOWEXM65-COMPLETE BOWEXM65-COMPLETE
BoWex® couplings with attachments that can generate heat, static charge and sparks are ;u>not ;/u> permitted for use in hazardous locations. Hubs are supplied unbored, it is down to the customer to machine to finish, within the couplings parameters. BoWex M Tooth Gear Couplings. BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear. The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance. Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise. BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools. The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production. Features and Benefits. Double cardanic curved-tooth gear coupling® For all applications in the range of machinery and hydraulics Maintenance free due to material combination nylon/steel Taper and inch bores for hydraulic pumps 100° maximum operating temperature Absorbs axial, angular and radial misalignment Torsionally rigid Short shaft distance. Product Application Information. Food industry, print and paper industry, textile industry, sewage technology, wash-mobiles, chemical and pharmaceutical, offshore units, and so on. For use in aggressive environments (air, water, chemicals, and so on).
1 products found
JPY: 104,000
USD: 651.92
-
KTR 56mm OD Jaw Coupling ROTEX24PB-STHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 9,900
USD: 62.06
-
KTR 56mm OD Jaw Coupling ROTEX24PB-ALIHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 6,810
USD: 42.69
-
KTR 66mm OD Jaw Coupling ROTEX28PB-ALIHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 9,850
USD: 61.74
-
KTR 66mm OD Jaw Coupling ROTEX28PB-STHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 12,900
USD: 80.86
-
KTR 80mm OD Jaw Coupling ROTEX38PB-CIHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 29,100
USD: 182.41
-
KTR 80mm OD Coupling With Set Screw Fastening ROTEX38PB-ALIHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 22,700
USD: 142.29
-
KTR 95mm OD Jaw Coupling ROTEX42PB-CIHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 37,700
USD: 236.32
-
KTR 95mm OD Coupling With Set Screw Fastening ROTEX42PB-ALIHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 32,700
USD: 204.98
-
KTR 104mm OD Coupling With Set Screw Fastening ROTEX48PB-ALIHUB-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Couplings - Hub. A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored. ATEX approved.
1 products found
JPY: 38,400
USD: 240.71
-
KTR 66mm OD Coupling With Set Screw Fastening ROTEX28-Complete-KTR
KTR Jaw Couplings - Complete. A complete torsionally flexible coupling comprising of two hubs and a polyurethane (T-PUR®) spider. Available in various sizes from 14 to 48 (See Similar products listing). The T-PUR® spider provides damping to reduce shock and vibration transmitted through the system and offers improved heat resistance and service life compared to standard polyurethane spiders. Jaw couplings can be used to correct for small angular, axial and parallel mis-alignments and are suitable for applications with high bearing loads, inertia and high RPM. T-PUR spider for improved heat resistance and long life. ATEX 95 approved Maximum torsional angle 5°
1 products found
JPY: 23,900
USD: 149.82
-
KTR 80mm OD Coupling With Set Screw Fastening ROTEX38-Complete-KTR
KTR Jaw Couplings - Complete. A complete torsionally flexible coupling comprising of two hubs and a polyurethane (T-PUR®) spider. Available in various sizes from 14 to 48 (See Similar products listing). The T-PUR® spider provides damping to reduce shock and vibration transmitted through the system and offers improved heat resistance and service life compared to standard polyurethane spiders. Jaw couplings can be used to correct for small angular, axial and parallel mis-alignments and are suitable for applications with high bearing loads, inertia and high RPM. T-PUR spider for improved heat resistance and long life. ATEX 95 approved Maximum torsional angle 5°
1 products found
JPY: 30,200
USD: 189.31
-
KTR 105mm OD Coupling With Set Screw Fastening ROTEX48-Complete-KTR
KTR Jaw Couplings - Complete. A complete torsionally flexible coupling comprising of two hubs and a polyurethane (T-PUR®) spider. Available in various sizes from 14 to 48 (See Similar products listing). The T-PUR® spider provides damping to reduce shock and vibration transmitted through the system and offers improved heat resistance and service life compared to standard polyurethane spiders. Jaw couplings can be used to correct for small angular, axial and parallel mis-alignments and are suitable for applications with high bearing loads, inertia and high RPM. T-PUR spider for improved heat resistance and long life. ATEX 95 approved Maximum torsional angle 5°
1 products found
JPY: 88,900
USD: 557.26
-
KTR Coupling ROTEX19-64SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 4,090
USD: 25.64
-
KTR Coupling ROTEX24-92SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 3,160
USD: 19.81
-
KTR Coupling ROTEX42-92SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 10,400
USD: 65.19
-
KTR Coupling ROTEX48-92SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 12,100
USD: 75.85
-
KTR Coupling ROTEX24-98SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 3,170
USD: 19.87
-
KTR Coupling ROTEX28-98SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 4,050
USD: 25.39
-
KTR Coupling ROTEX38-98SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 6,960
USD: 43.63
-
KTR Coupling ROTEX42-98SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 10,400
USD: 65.19
-
KTR Coupling ROTEX48-98SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 12,100
USD: 75.85
-
KTR Coupling ROTEX24-64SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 5,060
USD: 31.72
-
KTR Coupling ROTEX28-64SHEL-KTR
Each Coupling requires two hubs and a spider. KTR Jaw Coupling Spiders. Jaw coupling spiders for use with KTR's range of hubs. Manufactured from T-PUR® an improved polyurethane that is able to withstand significantly higher temperatures than standard polyurethane spiders giving greatly improved length of service. Available in 92 (shore-A), 98 (shore-A) and 64 (shore-D) for varying degrees of damping in various sizes to suit a wide variety of applications. ATEX approved.
1 products found
JPY: 6,390
USD: 40.06
