[Greenlee]Electronic/Electrical Parts and Controll Equipments
Filters
-
Greenlee Cable Drum Roller 710mm (H) x 605mm (L) x 95 mm (W) diameter 200 → 700mm 1 shelf 52055384
Cable Drum Roller. A lightweight and robust drum roller for the easy winding and unwinding of large cable drums. Adjustable castors to fit drum size Zinc plated Steel with protective spray coating Ramp for quick & effective movement of drum
1 products found
JPY: 75,200
USD: 471.39
-
Greenlee Punch and Die Tool, Hydraulic, Circular 16.2mm 50069527
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 38,600
USD: 241.96
-
Greenlee Punch and Die Tool, Hydraulic, Circular 18.6mm 50069535
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 40,100
USD: 251.36
-
Greenlee Punch and Die Tool, Hydraulic, Circular 22.5mm 50069551
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 48,000
USD: 300.88
-
Greenlee Punch and Die Tool, Hydraulic, Circular 25.4mm 50069560
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 58,700
USD: 367.96
-
Greenlee Punch and Die Tool, Hydraulic, Circular 28.3mm 50069578
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 55,900
USD: 350.40
-
Greenlee Punch and Die Tool, Hydraulic, Circular 32.5mm 50069594
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 67,500
USD: 423.12
-
Greenlee Punch and Die Tool, Hydraulic, Circular 37mm 50069608
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 67,700
USD: 424.37
-
Greenlee Punch and Die Tool, Hydraulic, Circular 50mm 50069632
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 122,000
USD: 764.75
-
Greenlee Punch and Die Tool, 50069667 50069667
Only part number < 363-0632') 363-0632/hydraulic screwdriver can be used.
Hydraulic Round Hole Punch1 products found
JPY: 135,000
USD: 846.24
-
Greenlee Draw Bolt for Punch up to 3.5 mm Mild Steel and Stainless Steel, Fibreglass / Plastics 50294512
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 21,400
USD: 134.14
-
Greenlee Draw Bolt for Punch up to 3.5 mm Mild Steel and Stainless Steel, Fibreglass / Plastics 50294520
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 19,200
USD: 120.35
-
Greenlee 2.29kg Punch Driver Kit Machine Press 50342916
Heavy duty hole punches are compatible with these items and must be used in conjunction with heavy duty draw bolts Size 1 < 363-0610') 363-0610/ and Size 2 < 363-0626') 363-0626/. Hand Hydraulic Punch Driver. Ideal for fast, straight on front panel punching For use with heavy duty hole punches Supplied in a plastic case Weight 2.29kg Length 321mm Punching capacity up to 1.9mm mild steel Force 71kN
1 products found
JPY: 271,000
USD: 1,698.74
-
Greenlee Punch and Die Tool, Hydraulic, 15 Way D F 29.6 x 12.9mm 50124722
Greenlee Hole Punches - D Connector. High quality punches for D connector cut-outs. Fast accurate panel punching Capacity up to 1.6mm mild steel Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no. < 363-0632') 363-0632/ use adaptor stock no. < 478-0615') 478-0615/
1 products found
JPY: 74,000
USD: 463.86
-
Greenlee Punch and Die Tool, Hydraulic, Circular 20mm 50124790
Punches up to 25 mm can only be used manually using the bolt provided. The 116 mm punche requires a dedicated drawbolt, see stock number ; 478-0643 478-0643. Special Size Hole Punches. Special size hole punches used to punch burr-free holes for switches and instruments in enclosures. Punch up to 3.0mm mild steel and up to 1.5mm stainless steel. (punching stainless steel reduces lifetime of punches). Features and Benefits:. Die alignment marks for accurate alignment Supplied complete with punch, die, draw stud and counter nut 3mm cutting capacity for mild steel 1.5mm cutting capacity for stainless steel. For use with Driver Kit, Stock No. ; 398-6187 398-6187
1 products found
JPY: 9,130
USD: 57.23
-
Greenlee Punch and Die Tool, Hand, Square 9.53 x 9.53mm 50124838
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 46,500
USD: 291.48
-
Greenlee Draw Stud for Punch Mild Steel, Aluminium, Fibreglass and Plastic up to 3 mm 52085691
ISO Hand Punches. Slug buster are round and special shape punches with a unique profile for slug splitting, allowing easy slug removal. Slug buster punches are usually suitable for mild steel, plastic and aluminium up to 3.5mm thick. Their application is also for manual and hydraulic operation. Features and Benefits. All punches are ISO standard sizes Use with manual, ratchet or hydraulic punch drivers Will punch mild steel, aluminium, fibreglass and plastic up to 3 mm
1 products found
JPY: 18,200
USD: 114.09
-
Greenlee Draw Stud for Punch Mild Steel, Aluminium, Fibreglass and Plastic up to 3 mm 52085692
ISO Hand Punches. Slug buster are round and special shape punches with a unique profile for slug splitting, allowing easy slug removal. Slug buster punches are usually suitable for mild steel, plastic and aluminium up to 3.5mm thick. Their application is also for manual and hydraulic operation. Features and Benefits. All punches are ISO standard sizes Use with manual, ratchet or hydraulic punch drivers Will punch mild steel, aluminium, fibreglass and plastic up to 3 mm
1 products found
JPY: 13,800
USD: 86.50
-
Greenlee Draw Stud for Punch Mild Steel, Aluminium, Fibreglass and Plastic up to 3 mm 51300430
ISO Hand Punches. Slug buster are round and special shape punches with a unique profile for slug splitting, allowing easy slug removal. Slug buster punches are usually suitable for mild steel, plastic and aluminium up to 3.5mm thick. Their application is also for manual and hydraulic operation. Features and Benefits. All punches are ISO standard sizes Use with manual, ratchet or hydraulic punch drivers Will punch mild steel, aluminium, fibreglass and plastic up to 3 mm
1 products found
JPY: 3,480
USD: 21.81
-
Greenlee 3 Hole Punch, Hand, Round 22.5mm 50319620
ISO Hand Punches. Slug buster are round and special shape punches with a unique profile for slug splitting, allowing easy slug removal. Slug buster punches are usually suitable for mild steel, plastic and aluminium up to 3.5mm thick. Their application is also for manual and hydraulic operation. Features and Benefits. All punches are ISO standard sizes Use with manual, ratchet or hydraulic punch drivers Will punch mild steel, aluminium, fibreglass and plastic up to 3 mm
1 products found
JPY: 16,600
USD: 104.06
-
Manual Draw stud 9.5 x 40mm 50000420
ISO Hand Punch
A round punch with a special profile that does not release slug, so that slug can be easily removed because slug is divided.1 products found
JPY: 4,480
USD: 28.08
-
Greenlee Punch and Die Tool, Hydraulic, Circular 15.2mm 50069519
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 37,100
USD: 232.56
-
Greenlee Punch and Die Tool, Hydraulic, Circular 20.4mm 50069543
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 43,800
USD: 274.56
-
Greenlee Punch and Die Tool, 50069586 50069586
Only part number < 363-0632') 363-0632/hydraulic screwdriver can be used.
Hydraulic Round Hole Punch1 products found
JPY: 60,400
USD: 378.61
-
Greenlee Punch and Die Tool, Hydraulic, Circular 40.5mm 50069616
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 71,900
USD: 450.70
-
Greenlee Punch and Die Tool, Hydraulic, Circular 47mm 50069624
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 96,800
USD: 606.78
-
Greenlee Punch and Die Tool, Hydraulic, Circular 54mm 50069640
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 121,000
USD: 758.48
-
Greenlee Punch and Die Tool, Hydraulic, Circular 60mm 50069659
Use with hydraulic drivers only. Heavy Duty Hole Punch. Will punch up to 3.5mm in mild and stainless steel, fibreglass/plastics Split slugs fall free and cannot cling to draw stud Greatly increased life expectancy compared to standard punches Available in 16 sizes including Pg and ISO sizes Use size 1 draw bolt for punches up to 25.4mm Use size 2 draw bolt for punches up to 28.3mm and greater
1 products found
JPY: 129,000
USD: 808.63
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Square 15.1 x 15.1mm 50124854
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 51,600
USD: 323.45
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Rectangular 19.1 x 13.1mm 50124889
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 62,900
USD: 394.28
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Rectangular 22 x 19.6mm 50124897
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 73,500
USD: 460.73
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Rectangular 27.2 x 12.2mm 50124919
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 66,300
USD: 415.60
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Rectangular 29.4 x 22mm 50124960
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 76,800
USD: 481.41
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Rectangular 37 x 21.9mm 50125010
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 85,000
USD: 532.82
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Rectangular 50.8 x 25.8mm 50125028
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 94,200
USD: 590.49
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Square 19.1 x 19.1mm 50124870
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 75,400
USD: 472.64
-
Greenlee Punch and Die Tool, Hand; Hydraulic, Rectangular 31.4 x 28.3mm 50125036
Hand/Hydraulic Punches. High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on size Ball bearing draw stud to minimise working force required For hydraulic operation with punch driver stock no.< 363-0632') 363-0632/ or stock no. < 398-6187') 398-6187/ an adaptor is required (see table for appropriate adaptor)
1 products found
JPY: 85,300
USD: 534.70
-
Greenlee 16.2mm , 1 Piece Punch and Die Set With Punch & Die ISO 16 (16.2 mm) 52055431
Speed lock and draw stud not included. Greenlee Speed Punch & Die. The Speed Punch system enables you to save money and time while working easier. With a new no thread design cross threading is eliminated while the extremely tough and durable Speed Lock speeds up the job while prolonging the life of the tool. Use in combination with the hydraulic punching tool LS50-L Flex for world class speed and performance. Set range from ISO 16 to 63 Simple to use Includes Punch & Die No thread makes it the fastest system on the market Suitable for mild steel (St37), plastic and aluminium to 3.5 mm Up to 3x faster Capable of 40,000 lbs of punching force ISO 16, 20, 25 & PG 16 works with 9.5 mm Draw Stud ISO 32, 40, 50, 63 works with 19 mm Draw Stud
1 products found
JPY: 15,000
USD: 94.03
-
Greenlee 16.2 mm, 20.4 mm, 25.4 mm, 32.5 mm, 40.5 mm , 5 Piece Punch and Die Set With Punch & Die ISO 16 (16.2 mm), 52055439SET
Greenlee Speed Punch Set. The Speed Punch system enables you to save money and time while working easier. With a new no thread design cross threading is eliminated while the extremely tough and durable Speed Lock speeds up the job while prolonging the life of the tool. Use in combination with the hydraulic punching tool LS50-L Flex for world class speed and performance. Set range from ISO 16 to 63 Simple to use Includes Punch, die, draw studs and Speed Lock in a durable case No thread makes it the fastest system on the market Standard draw stud end to work with existing hydraulics Suitable for mild steel (St37), plastic and aluminium to 3.5 mm Up to 3x faster Capable of 40,000 lbs of punching force
1 products found
JPY: 140,000
USD: 877.58
-
Greenlee 16.2 mm, 20.4 mm, 25.4 mm, 32.5 mm, 40.5 mm, 50.8 mm, 64 mm , 7 Piece Punch and Die Set With Punch & Die ISO 52055440SET
Greenlee Speed Punch Set. The Speed Punch system enables you to save money and time while working easier. With a new no thread design cross threading is eliminated while the extremely tough and durable Speed Lock speeds up the job while prolonging the life of the tool. Use in combination with the hydraulic punching tool LS50-L Flex for world class speed and performance. Set range from ISO 16 to 63 Simple to use Includes Punch, die, draw studs and Speed Lock in a durable case No thread makes it the fastest system on the market Standard draw stud end to work with existing hydraulics Suitable for mild steel (St37), plastic and aluminium to 3.5 mm Up to 3x faster Capable of 40,000 lbs of punching force
1 products found
JPY: 240,000
USD: 1,504.42
