Martindale

Martindale TEK 100 Non Contact Voltage Detector, 100V ac to 600V ac　TEK100

1 x PP3 battery. Non-Contact Voltage Indicator Martindale TEK100. A non-contact, 100 V ac to 600 V ac voltage indicator with both audible and visual voltage warning. A self-test feature (which ensures the unit is working) transmits a 50 Hz signal to the sensing device testing the integrity of the internal circuitry. Proving the unit is fully functional and avoids the need for a separate proving unit. Pocket-sized unit Voltage detection without making contact 100 V ac → 600 V ac range LED light indicators Audible indicator Self-test function means there is no need to use proving units Replacement PP3 batteries can be purchased separately (Stock No. < 394-9059)') 394-9059)/ CAT IV 600 V

Martindale

10 x 'Do Not Operate, Electrician Working, Equipment Locked Off' Lockout Tag　TAG2

Replacement Tags. A pack of ten Danger tags for Martindale lock-off kits.

Martindale

Martindale RSPC15250 Phase Rotation Tester CAT IV 600V CAT IV 600 V 60Hz 600V ac, Model PC 15250　PC15250

One fused crocodile clip, two fused prods with retractable GS38 shrouds, instructions. PC15250 Phase Sequence Indicator. The PC15250 Phase Rotation Tester is a simple and quick 3 phase continuity and rotation indicator. The phase sequence indicator gives a fast and effective identification of worn or unmarked cables and ensures 3-phase outlets and machines are wired correctly Retractable GS38 probe shields give a choice between using long, exposed tips for reaching inaccessible contacts, and safer, shorter lengths for increased safety Input voltage range: 50V to 600V AC (Phase to Phase) Input frequency: 40 to 60Hz Input current: < 3mA Conforms to GS38 and BS EN61557-7, CAT IV 600V Class II, Double Insulation

Martindale

Martindale VI13800 Voltage Indicator CAT III 1000V, CAT IV 600 V　VI13800

BS EN61243-3: 2010. Safety Voltage Indicator Without Fuse, VI13800. The Martindale VI13800 is identical to the Martindale VI3700 except that the VI3800 does not have a fuse. This is so that it complies with BS EN61243-3: 2010, which came into effect in May 2013. This standard bans the use of fuses in 2-pole voltage indicators. The VI13800 safety characteristics include retractable prods, cable with an inner cover of different colour (to quickly identify damaged cables) and impedance at both ends to limit current flow if a lead should be broken. Testing for DC and AC voltage up to 600V Automatic AC/DC detection Bright LED indication Full voltage indication function without batteries Protective resistor in probe to limit current in event of cable damage Ergonomic and robust housing Retractable shrouds Fully meets GS38 and BE EN61243-3: 2010 Measurement Category CAT IV 600V, CAT III 1000V

Martindale

10 x 'Do Not Operate, Electrician Working, Equipment Locked Off' Lockout Tag　RSTAG4

Lock Off Warning Tags, TAG 4. Pack of 10 Danger tags for the Martindale lock off kits

Martindale

Martindale CMD1000 Cable Tracer, Cable Detection Depth 0.4 (U AC) m, 0.5 (Dual Pole) m, 2 (Single Pole) m, 2.5 (Single　RSCD1000

Transmitter, Receiver, bag, TL47 test leads (with crocodile clips), earthing rod, 9V alkaline battery, 1.5V alkaline battery x 6 and instructions. CD1000 Cable Detector Kit. The Martindale CD1000 Cable Detector is ideal for tracing cables in walls and underground, locating fuses/breakers on live or dead circuits and locating interruptions and open-circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. For all applications (live or dead cables) without additional instruments Proven digitally coded sender signal guarantees clear signal identification Transmitter with LCD display for transmitting level, transmitting code Receiver with a backlight LCD display for level of receiving signal, code of receiving signal and live voltage indication Automatic or manual adjustment of receiving signal sensitivity Mute function Auto power off Additional torch lamp for working in dark environments Additional transmitters can be used for multiple users. Conforms to BS EN61010-1 CAT III 300V Class II Double Insulation Pollution degree: 2. Transmitter:. Conforms to BS EN 61010-1 CAT III 600V Class II Double Insulation Pollution degree: 2. Receiver:

Martindale

1 Lock MCB Isolation Lock　RSLOK3

Martindale MCB Isolation Locks. These locks are for use with MCBs on domestic and industrial distribution boards for isolation purposes.

Martindale

1 Lock MCB Isolation Lock　RSLOK1

Martindale MCB Isolation Locks. These locks are for use with MCBs on domestic and industrial distribution boards for isolation purposes.

Martindale

1 Lock MCB Isolation Lock　RSLOK2

Martindale MCB Isolation Locks. These locks are for use with MCBs on domestic and industrial distribution boards for isolation purposes.

Martindale

1 Lock MCB Isolation Lock　RSLOK4

Martindale MCB Isolation Locks. These locks are for use with MCBs on domestic and industrial distribution boards for isolation purposes.

Martindale

1 Lock, 6mm Shackle　LOK7

Martindale

Martindale PSI4000 Phase Rotation Tester CAT III 1000V, CAT IV 600V CAT III 1000 V, CAT IV 600 V 65Hz 1000V ac　PSI4000

4 x AA batteries, soft carry case and instruction manual. PSI4000 Phase Rotation Indicator. The Martindale PSI4000 is a unique phase rotation indicator that carries out the measurement via inductive crocodile clips. This method increases the safety of the user, whilst the bright LEDs give a clear indication of either clockwise or anti-clockwise phase rotation. The design of this phase rotation tester allows for use on both insulated or uninsulated conductors, and an "Enhanced Brightness" switch makes indication brighter in strong ambient light. A combination of both rotating LEDs and buzzer tones indicate clockwise or anti-clockwise rotation. Input Voltage: 150V-1000V 3-Phase AC. Frequency Range: 45-65Hz Operating Temperature & Humidity: -10 °C to 50 °C, Max. 80%RH. Battery Current consumption: 15mA Cable Length: Approx. 800 mm Power Source: 1.5V X 4 (AA or LR6) alkaline batteries Auto-Off: After 5 mins of non activity Low Battery Warning: Power LED flashes below 4.6V DC battery voltage

Martindale

Martindale ET4 Clamp Meter, Max Current 200A ac, 200A dc CAT III 600V　RSET4

ET4 electrical tester, TL17 test leads, soft carry case, 9V battery, instruction manual. ET4 Electrical Tester. The Martindale ET4 is a compact electrical tester for measuring voltage, resistance and current. The electrical tester also has frequency, continuity and diode test functions and can also be used as a non-contact voltage indicator. It has the additional functions including auto power off, display hold. AC / DC Current: 0.1A to 200A AC / DC Voltage: 0.1mV to 600V Resistance: 0.1Ω to 50MΩ Frequency: 30Hz to 400Hz Continuity: 0.1Ω to 500Ω, buzz at <30Ω Diode Test: 1mV to 2V Non-Contact Voltage Indicator: 70V to 600V Fork maximum conductor size: 15mm diameter Power: 9V PP3 Alkaline (included) Dimensions: 202 x 51 x 44 mm Weight: 200 g (battery included). SAFETY. Conforms to BS EN 61010-1, BS EN 61010-2-032, CAT III 600 V Class II, Double Insulation Pollution Degree 2, indoor use. EMC. Conforms to BS EN 61326-1

Martindale

Martindale VT7 Voltage Indicator CAT III 600 V, CAT IV 300 V　RSVT7

VT7 Single Pole Voltage Indicator. The VT7 is a single pole contact voltage indicator which detects AC voltages of 50V-600V with bright LED indication. The VT7 single pole voltage indicator has a self test function and is IP54 rated, for indoor and outdoor use.. Voltage range: 50V - 600Vac rms Audible and visual indication Bright LED indication Frequency range: 50 - 60Hz Test current: <5μA IP rating: IP54 Conforms to BS EN61010-1 CAT IV 300V, CAT III 600V Class II, Double Insulation Pollution Degree: 2 Dimensions: 236 x 44 x 33 mm

Martindale

Martindale TEK 101 Non Contact Voltage Detector, 180V ac to 600V ac　RSTEK101

Martindale Non Contact Voltage Detector MARTEK101. Martindale TEK101 is a simple-to-use non-contact voltage indicator with audible and visual warnings and an extended probe tip for access to confined spaces. It is optimised for identifying energised conductors at voltages within the range 180 V to 600 V AC. Features include a unique built-in 50 Hz proving unit which tests the sensor operation, battery and LED. This unit proves the entire circuit is fully functional, avoiding the need for a separate proving unit. The tip design and optimised sensitivity make it possible to discriminate between adjacent live conductors. The high resolution capability of the TEK101 improves safety and saves time on-site. The pocket sized design conforms to CAT IV 1000 V safety regulations.

Martindale

Martindale PD240 Voltage Indicator Proving Unit 2mA 240V dc　PD240

BS-EN61010-1 2001. Battery, belt clip, instruction manual. Not for use with Martindale VI13700G voltage indicators or Drummond test lamps. Martindale PD240 Pocket Sized Proving Unit. The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces. Features and Benefits. Output voltage 240 V + 4% DC at 2 mA, 3.5 mA maximum LED power indicator threshold180 V + 4% DC output Minimum operating battery level 5 V DC Operating temperature range -10 to 40 °C at maximum 70% RH Dimensions 144 x 63 x 31 mm Weight 180 g approximately (including battery)

Martindale

Martindale Straight Lamp Probe, For Use With MTL10 Test Lamp, MTL20 Test Lamp, MTL20B Test Lamp　RSMTL2106

Martindale Probes for use with Test Lamps and Proving Devices. Martindale probes for use with John Drummond MTL10 ( < 706-8586') 706-8586/ ) and MTL20 ( < 706-8589') 706-8589/ ) voltage indicator and proving kits.

Martindale

Martindale Straight Lamp Probe, For Use With MTL10 Test Lamp, MTL20 Test Lamp, MTL20B Test Lamp　RSMTL2103

Martindale Probes for use with Test Lamps and Proving Devices. Martindale probes for use with John Drummond MTL10 ( < 706-8586') 706-8586/ ) and MTL20 ( < 706-8589') 706-8589/ ) voltage indicator and proving kits.

Martindale

1 Lock ABS, Polycarbonate　LOKKIT6

Martindale

Electrical Lock Out Kit　LOKKIT2PLUS

Martindale

1 Lock, 6mm Shackle　LOKFS1

Martindale

6 Lock, 9mm Attachment Point　CABLOK5BL

Martindale

6 Lock, 9mm Attachment Point　CABLOK3BL

Martindale

6 Lock, 9mm Attachment Point　CABLOK1BL

Martindale

3 Lock, 6mm Shackle PP MCB Isolation Lock, 7 (Depth)mm Attachment Point　LOK2/PK3

Martindale

1 Lock, 22.6mm Shackle, 8.4mm Attachment Point　LOK7/PK3

Martindale

3 Lock, 6mm Shackle PP MCB Isolation Lock, 7 (Depth)mm Attachment Point　LOK15/PK3

Martindale

3 Lock, 6mm Shackle PP MCB Isolation Lock　LOK15

Martindale

3 Lock, 6mm Shackle PP MCB Isolation Lock　LOK1/PK3

Martindale

3 Lock, 6mm Shackle PP MCB Isolation Lock, 15 (Depth)mm Attachment Point　LOK3/PK3

Martindale

3 Lock, 6mm Shackle PP MCB Isolation Lock, 15 (Depth)mm Attachment Point　LOK4/PK3

Martindale

3 Lock, 7mm Shackle ABS, Polycarbonate　LOK6/PK3

Martindale

1 Lock, 6mm Shackle PP　MARPL13

Martindale

［Discontinued］Martindale VIPDLOKPRO138 Voltage Indicator & Proving Unit Kit 400V, Kit Contents 10mm Yellow MCB Lock Clip, 6mm Red MCB　RSVIPDLOKPRO138

VIPDLOKPRO138 Voltage Indicator, Proving Device and Lock Out Kit. Martindale VIPDLOKPRO138 kit contains the VI13800 400 V voltage indicator, matching PD440 proving unit and the LOKKITPRO ultimate lock-out kit. The kit ensures that you are never short of the right device to lock-out safely, prove dead and achieve compliance when carrying out maintenance and installation of plant and equipment. The voltage indicator fully complies with the latest edition of GS38 and can be used in installation categories up to 600 V CAT IV. The voltage indicator and proving unit are supplied in a TC69 combination carry case to ensure that the proving unit is always to hand. For convenience and to save time, the proving unit can be used without having to remove it from the case. In addition to the VI13800 and PD440, the kit includes the following locking. 1 x Padlock with unique key (PAD10R). 1 x Cartridge fuse isolation lock (LOK6). 1 x Cable lock-off (CABLOK). 1 x Hasp (LOKHASP25). 1 x Plunge locking piece (LOK15). 1 x Appliance plug lock-out (PL13). 1 x MCB green isolation lock (LOK1). 1 x MCB yellow isolation lock (LOK2). 1 x MCB blue isolation lock (LOK3). 1 x MCB small red isolation lock (LOK4). 1 x MCB red isolation lock (LOK5). 1 x Slimline grey isolation lock (LOK7). 1 x Yellow MCB lock, 10 mm clip (LOK10). 1 x Red MCB lock, 6 mm clip (LOK11). 5 x Equipment locked out tags which can be written on (TAG4). 1 x Black marker pen (LOKMP). 1 x TC68 soft carry case (TC68)

Martindale

［Discontinued］Martindale VIPDLOKPRO150 Voltage Indicator & Proving Unit Kit 690V, Kit Contents 10mm Yellow MCB Lock Clip, 6mm Red MCB　RSVIPDLOKPRO150

VIPDLOKPRO150 Voltage Indicator, Proving Device and Lock Out Kit. Martindale VIPDLOKPRO150 kit contains the VI-15000 690 V voltage indicator, matching PD690 proving unit and the LOKKITPRO, ultimate lock out kit. The kit ensures you are never short of the right device to lock out safely, prove dead and achieve compliance when carrying out maintenance and installation of plant and equipment. The voltage indicator fully complies with the latest edition of GS38 and with a 1000 V CAT IV safety rating is suitable for use in all installation categories. The voltage indicator and proving unit are supplied in a TC69 combination carry case to ensure that the proving unit is always to hand. For convenience and to save time, the proving unit can be used without having to remove it from the case. In addition to the VI-15000 and PD690, the kit includes the following locking off devices:. 1 x Padlock with unique key (PAD10R). 1 x Cartridge fuse isolation lock (LOK6). 1 x Cable lock-off (CABLOK). 1 x Hasp (LOKHASP25). 1 x Plunge locking piece (LOK15). 1 x Appliance plug lock out (PL13). 1 x MCB green isolation lock (LOK1). 1 x MCB yellow isolation lock (LOK2). 1 x MCB blue isolation lock (LOK3). 1 x MCB small red isolation lock (LOK4). 1 x MCB red isolation lock (LOK5). 1 x Slimline grey isolation lock (LOK7). 1 x Yellow MCB lock, 10mm clip (LOK10). 1 x Red MCB lock, 6mm clip (LOK11). 5 x Equipment locked out tags which can be written on (TAG4). 1 x Black marker pen (LOKMP). 1 x TC68 soft carry case (TC68)

Martindale

［Discontinued］12 Lock, 6mm Shackle Plastic, Steel Lockout Kit　RSLOKKITPRO

LOKKITPRO Ultimate Lock Out Kit. The LOKKITPRO is the ultimate lock-out kit enabling safe isolation procedures to be carried out in all facilities. The kit is ideal for contractors and maintenance teams working on industrial and commercial sites. Included is the LOK7 slim line MCB lock. Suitable for use on breakers where the position of the test button prevents the use of conventional lock-outs or access is restricted. Plus a 1 m cable lock device suitable for both electrical and mechanical locking out. The kit comprises of 8 different locking devices for simple fitting to MCBs, RCBOs and fuse holders. There is a universal red spot type fuse holder lock adjustable for different current ratings. A steel safety hasp which allows multiple padlocks to be used and the versatile cable lock with integrated hasp for control panels. A professional plastic bodied padlock with a 6 mm hardened steel shackle is included for securing the locking devices. A BS1633 13 A mains plug lock, 5 warning tags and a marker pen are supplied in a durable case with space for storing extra accessories. LOKKITPRO includes: 8 MCB locking devices, 5 warning tags, padlock, hasp, universal fuse carrier lock, cable lock, 13A plug lock, marker pen and soft case. Essential equipment for compliance with Electricity at Work Regulations for safe working in all locations. Kit Contents. 1 x Padlock with unique key (PAD10R). 1 x Cartridge fuse isolation lock (LOK6). 1 x Cable lock-off (CABLOK). 1 x Hasp (LOKHASP25). 1 x Plunge locking piece (LOK15). 1 x Appliance lock-out (PL13). 1 x MCB Isolation lock kit (LOKMCB). 1 x Slimline grey isolation lock (LOK7). 1 x Yellow MCB lock, 10 mm clip (LOK10). 1 x Red MCB lock, 6 mm clip (LOK11). 5 x Equipment locked out tags which can be written on (TAG4). 1 x Black marker pen (LOKMP). 1 x TC68 soft carry case (TC68)

Martindale

［Discontinued］Martindale RSPD690 Voltage Indicator Proving Unit 700V　RSPD690

Proving Unit Martindale PD690. Battery powered proving unit, essential for safe use of voltage indicators and test lamps. Test voltage indicators with ranges above 240V 690V (nominal) @ 0.5mA high output voltage source Designed for use with Drummond and other similar lower resistance test lamps, having sufficient output to cause illumination Neon indicates battery condition Single probe operation, allows for non-contact voltage tester proving (access 5mm) Operates test voltage indicators that have greater than 4kΩ internal resistance 6 x AA batteries (required, see stock no. < 591-225') 591-225 , maintain output voltage for extended testing. 143 x 83 x 50mm, (H x W x D) Wt. 300g

Martindale

［Discontinued］Martindale VT3 Non Contact Voltage Detector ±10mT, 200V ac to 1000V ac　VT3

BS EN61010-1 CAT III 1000 V. 2 x AAA batteries (included). VT3 Voltage and Magnetic Indicator. Martindale VT3 is a non-contact voltage and magnetic indication from 200 V to 1000 V. Accurately detects the presence of AC voltages in wall sockets, wires and cables, circuit breakers and electrical panels. Eliminates any potential danger of working on a live circuit. A red light illuminates the tip and the unit gives an audible signal when AC volts are detected. A green light illuminates to show the presence of a magnetic field. Ergonomic design with safe, non-slip finger grip. Easy to use and small enough to fit in your pocket. Non-contact voltage detection Also detects magnetic fields Range: 200 V to 1000 V Locates breaks in cables Voltage Sensitivity: Indicates approx. 4 mm from a conductor at 240 V ac Magnetic Sensitivity: ±10 mT Detects blown fuses inside plugs or fuse holders Finds voltage carrying cables in junction boxes Simple to use Pocket sized, pen shape tester Detects faulty inline switches Dimensions: 170 mm Length, approx. 19 mm diameter Weight: 73.6 g

Martindale

［Discontinued］Martindale PD430 Voltage Indicator Proving Unit 50 V, 440 V　PD430

Compatible with the Martindale VI13700G & the new Martindale VI13700/2. MARTINDALE PD430 and PD440 Proving Unit. Using a voltage indicator without first proving it is working correctly has proved fatal. The Martindale PD430 proving unit features a low 50V check as well as a high 440Vac, the PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations. Operating Temperature: -10°C to +40°C at max 70% RH Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent Dimensions: 143 x 84 x 50mm Weight: 400g approx including battery

Martindale

［Discontinued］Martindale PD440 Voltage Indicator Proving Unit 440V　PD440

Compatible with the Martindale VI13700G & the new Martindale VI13700/2. MARTINDALE PD430 and PD440 Proving Unit. Using a voltage indicator without first proving it is working correctly has proved fatal. The Martindale PD430 proving unit features a low 50V check as well as a high 440Vac, the PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations. Operating Temperature: -10°C to +40°C at max 70% RH Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent Dimensions: 143 x 84 x 50mm Weight: 400g approx including battery