[METCASE]RS Components
Filters
-
Aluminium Project Box, White, 160 x 130 x 85mm M5716107
1 x front bezel, 2 x side extrusions, top and base covers, rear panel extrusion, 4 non slip feet and fixing screws. METcase Mettec Type A Cases. The Mettec Type A case consists of an aluminium front bezel, top and base covers and extruded side and rear panels. A high degree of shielding is guaranteed thanks to its masked internal faces and additional contact points. The guide ridges in the side extrusions of the Mettec case allow mounting of PCBs in several positions. Features and Benefits. Aluminium front bezel, top and base covers and extruded side and rear panels Front bezel recessed for fitting optional aluminium front panels Base panel fitted with earth stud Guide ridges in side extrusions for mounting PCBs All parts fully integrated for strength and shielding Supplied fully assembled Fine texture powder polyester finish Anthracite Grey RAL7016 or Off White RAL9002. Applications. The Mettec Type A case is designed for small desktop and portable electronics equipment. Applications include measuring and control technology, medical, laboratory and peripheral equipment for computers and networking.
1 products found
JPY: 15,600
USD: 97.79
-
METCASE 19.7 x 17.8 x 17.8mm PCB Clip for use with Mettec Case 10 X M5700200
Mettec PCB Clip. For mounting PCBs and other components at any position in the Mettec cases Self-adhesive pad for fast installation
1 products found
JPY: 1,410
USD: 8.84
-
Off white Al mettec case,230x180x85mm M5723107
1x front bezel, 2x side extrusion molded plate, top cover and base cover, rear panel extrusion, 4 non-slip legs, fixed screws.
METcase Mettec Type A Case1 products found
JPY: 27,300
USD: 171.13
-
Off white Al mettec case,230x180x85mm M5723127
1x front bezel, 2x side extrusion molded plate, top cover and base cover, rear panel extrusion, 4 non-slip legs, fixed screws.
METcase Mettec Type A Case1 products found
JPY: 28,400
USD: 178.02
-
Aluminium Project Box, Grey, 350 x 250 x 120mm M5735204
1 x front bezel, 2 x side extrusions, top and base covers, rear panel extrusion, 4 non slip feet and fixing screws. METcase Mettec Type A Cases. The Mettec Type A case consists of an aluminium front bezel, top and base covers and extruded side and rear panels. A high degree of shielding is guaranteed thanks to its masked internal faces and additional contact points. The guide ridges in the side extrusions of the Mettec case allow mounting of PCBs in several positions. Features and Benefits. Aluminium front bezel, top and base covers and extruded side and rear panels Front bezel recessed for fitting optional aluminium front panels Base panel fitted with earth stud Guide ridges in side extrusions for mounting PCBs All parts fully integrated for strength and shielding Supplied fully assembled Fine texture powder polyester finish Anthracite Grey RAL7016 or Off White RAL9002. Applications. The Mettec Type A case is designed for small desktop and portable electronics equipment. Applications include measuring and control technology, medical, laboratory and peripheral equipment for computers and networking.
1 products found
JPY: 40,600
USD: 254.50
-
Off white Al mettec case,230x180x120mm M5723207
1x front bezel, 2x side extrusion molded plate, top cover and base cover, rear panel extrusion, 4 non-slip legs, fixed screws.
METcase Mettec Type A Case1 products found
JPY: 27,100
USD: 169.87
-
Aluminium Project Box, White, 250 x 250 x 120mm M5725227
1 x front bezel, 2 x side extrusions, top and base covers, rear panel extrusion, 4 non slip feet and fixing screws. METcase Mettec Type A Cases. The Mettec Type A case consists of an aluminium front bezel, top and base covers and extruded side and rear panels. A high degree of shielding is guaranteed thanks to its masked internal faces and additional contact points. The guide ridges in the side extrusions of the Mettec case allow mounting of PCBs in several positions. Features and Benefits. Aluminium front bezel, top and base covers and extruded side and rear panels Front bezel recessed for fitting optional aluminium front panels Base panel fitted with earth stud Guide ridges in side extrusions for mounting PCBs All parts fully integrated for strength and shielding Supplied fully assembled Fine texture powder polyester finish Anthracite Grey RAL7016 or Off White RAL9002. Applications. The Mettec Type A case is designed for small desktop and portable electronics equipment. Applications include measuring and control technology, medical, laboratory and peripheral equipment for computers and networking.
1 products found
JPY: 36,300
USD: 227.54
-
Aluminium Project Box, Grey, 350 x 250 x 85mm M5735104
1 x front bezel, 2 x side extrusions, top and base covers, rear panel extrusion, 4 non slip feet and fixing screws. METcase Mettec Type A Cases. The Mettec Type A case consists of an aluminium front bezel, top and base covers and extruded side and rear panels. A high degree of shielding is guaranteed thanks to its masked internal faces and additional contact points. The guide ridges in the side extrusions of the Mettec case allow mounting of PCBs in several positions. Features and Benefits. Aluminium front bezel, top and base covers and extruded side and rear panels Front bezel recessed for fitting optional aluminium front panels Base panel fitted with earth stud Guide ridges in side extrusions for mounting PCBs All parts fully integrated for strength and shielding Supplied fully assembled Fine texture powder polyester finish Anthracite Grey RAL7016 or Off White RAL9002. Applications. The Mettec Type A case is designed for small desktop and portable electronics equipment. Applications include measuring and control technology, medical, laboratory and peripheral equipment for computers and networking.
1 products found
JPY: 37,800
USD: 236.95
-
METCASE 199.5 x 2 x 65.1mm Front Panel Kit for use with Mettec Case M5700608
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 5,850
USD: 36.67
-
19-inch Front Panel Kit, 1U, Grey, Aluminium M5900010
Mettec Rack Cases. Robust and ergonomic light grey (RAL 7035) rack cases fitted with front bezel Two side extrusions, top, base and extruded rear panel (all ALOCROM 1200), comfort handles EMC shielded, Base panel fitted with M4 earth stud Integral PCB and chassis guides Supplied fully assembled with fixings for the accessory front panel kit
1 products found
JPY: 8,240
USD: 51.65
-
19-inch Front Panel Kit, 2U, Grey, Aluminium M5900020
Mettec Rack Cases. Robust and ergonomic light grey (RAL 7035) rack cases fitted with front bezel Two side extrusions, top, base and extruded rear panel (all ALOCROM 1200), comfort handles EMC shielded, Base panel fitted with M4 earth stud Integral PCB and chassis guides Supplied fully assembled with fixings for the accessory front panel kit
1 products found
JPY: 8,900
USD: 55.79
-
METCASE 199.5 x 2 x 33.6mm Front Panel for use with Mettec Case M5700607
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 2,620
USD: 16.42
-
Aluminium Project Box, Grey, 190 x 230 x 85mm M5623125
Anodised aluminium front panels, eg stock no. ; 342-9533 342-9533 and ABS tilt feet, stock no. ; 209-6205 209-6205 are available separately. Unimet Case with Handle. An aluminium enclosure for desktop and portable electronic equipment such as controllers and medical devices. Easy to assemble case with a tilt/swivel carry handle Die-cast front bezel in mid-grey (RAL 7040) Folded top section, base and removable rear panel in light grey (RAL 7035) PCB mounting points in base 4 non-slip feet
1 products found
JPY: 54,300
USD: 340.38
-
METCASE Unidesk, Sloped Front, Aluminium, 200 x 200 x 21.6mm Desktop Enclosure, Grey M5320105RS
Unidesk Terminal Cases. An ergonomic sloping front enclosure for desktop or wall mounted applications. The Unidesk terminal case has a pre-assembled aluminium body with removable base panel. Robust enclosure designed to be house office system terminals, point of sale terminals, medical devices, industrial control equipment, security units and other types of electronics. Desk or wall mount Ergonomic front panel inclined 30° Flat rear section ideally suited to accept connectors and switches PCB mounting holes in base TÜV tested to IP54 (DIN EN 60529) Kit includes case, front panel, PCB mounting pillars and 4 'L' shaped sealing gaskets
1 products found
JPY: 62,700
USD: 393.03
-
METCASE Unidesk, Sloped Front, Aluminium, 200 x 300 x 21.6mm Desktop Enclosure, Grey M5330105RS
Unidesk Terminal Cases. An ergonomic sloping front enclosure for desktop or wall mounted applications. The Unidesk terminal case has a pre-assembled aluminium body with removable base panel. Robust enclosure designed to be house office system terminals, point of sale terminals, medical devices, industrial control equipment, security units and other types of electronics. Desk or wall mount Ergonomic front panel inclined 30° Flat rear section ideally suited to accept connectors and switches PCB mounting holes in base TÜV tested to IP54 (DIN EN 60529) Kit includes case, front panel, PCB mounting pillars and 4 'L' shaped sealing gaskets
1 products found
JPY: 73,300
USD: 459.48
-
METCASE Unidesk, Sloped Front, Aluminium, 200 x 400 x 21.6mm Desktop Enclosure, Grey M5340105RS
Unidesk Terminal Cases. An ergonomic sloping front enclosure for desktop or wall mounted applications. The Unidesk terminal case has a pre-assembled aluminium body with removable base panel. Robust enclosure designed to be house office system terminals, point of sale terminals, medical devices, industrial control equipment, security units and other types of electronics. Desk or wall mount Ergonomic front panel inclined 30° Flat rear section ideally suited to accept connectors and switches PCB mounting holes in base TÜV tested to IP54 (DIN EN 60529) Kit includes case, front panel, PCB mounting pillars and 4 'L' shaped sealing gaskets
1 products found
JPY: 84,500
USD: 529.68
-
Aluminium Project Box, Grey, 260 x 350 x 120mm M5635205
Anodised aluminium front panels, eg stock no. ; 342-9533 342-9533 and ABS tilt feet, stock no. ; 209-6205 209-6205 are available separately. Unimet Case without Handle. An advanced aluminium enclosure for desktop and portable electronic equipment such as controllers and medical devices. The Unimet instrument case has a pre-assembled internal chassis supplied with four snap-in PCB guides. The front and rear bezels fit to the fabricated case body. Easy to assemble case without handle Die-cast front bezel in mid-grey (RAL 7040) Folded top section, base and removable rear panel in light grey (RAL 7035) PCB mounting points in base 4 non-slip feet included
1 products found
JPY: 51,400
USD: 322.20
-
Aluminium Project Box, Grey, 260 x 250 x 150mm M5625325
Anodised aluminium front panels, eg stock no. ; 342-9533 342-9533 and ABS tilt feet, stock no. ; 209-6205 209-6205 are available separately. Unimet Case with Handle. An aluminium enclosure for desktop and portable electronic equipment such as controllers and medical devices. Easy to assemble case with a tilt/swivel carry handle Die-cast front bezel in mid-grey (RAL 7040) Folded top section, base and removable rear panel in light grey (RAL 7035) PCB mounting points in base 4 non-slip feet
1 products found
JPY: 83,300
USD: 522.16
-
Aluminium Project Box, Grey, 250 x 185 x 50mm M5512110
4 rubber feet, all fixings and assembly instructions. Unicase without Handle. The Unicase is a simple universal enclosures for measuring and control technology, feedback control, peripheral devices and interfaces, switchboxes, modems, medical field and laboratory technology. The design of the instrument case provides total access resulting in quick and simple assembly. The Unicase has internal assembly extrusions with four guide rail positions for mounting PCBs. Two standard colours light grey and black Simple and fast assembly Removable internal chassis PCB guide rails in the assembly extrusions Aluminium front and rear panels Front panels recessed to protect controls Four push-in non-slip rubber feet
1 products found
JPY: 24,100
USD: 151.07
-
Aluminium Project Box, Grey, 116 x 250 x 180mm M5825105
Datamet Cases. Aluminium enclosures designed for indoor applications. Provide total access to the electronics during installation on the wall. Die-cast front bezel, top cover and ‘L ‘ shape rear panel. All parts are made from aluminium, except hardware Finish is fine texture epoxy powder paint Case body is fabricated from 1.5mm material and painted RAL 7035 Bezel is aluminium die castings and extrusions then painted RAL 7040
1 products found
JPY: 48,800
USD: 305.90
-
Mounting Kit for use with Unicase Enclosures M5900016
Conforms to DIN 41494 ; IEC 297-1. Combimet 19in. Rack Case. The Combimet is a universal 19in. rack case with anodised aluminium front panels and two ergonomic front panel handles. The aluminium case body consists of two side panels with removable top, base and rear panels. The base panel of this 19in. rack case has mounting holes for a PCB or a chassis plate. All parts of the enclosure are fitted with M4 earth studs for electrical continuity. Modern design incorporating ergonomic front panel handles Robust aluminium case body with removable top, base and rear panels Ventilated top and base Anodised aluminium 19in. front panels Black RAL 9005 Mounting holes in base for PCBs ; chassis M4 earth studs on all components for electrical continuity Enclosure supplied fully assembled
1 products found
JPY: 1,960
USD: 12.29
-
Aluminium Project Box, Black, 130 x 180 x 50mm M5511119
4 rubber feet, all fixings and assembly instructions. Unicase without Handle. The Unicase is a simple universal enclosures for measuring and control technology, feedback control, peripheral devices and interfaces, switchboxes, modems, medical field and laboratory technology. The design of the instrument case provides total access resulting in quick and simple assembly. The Unicase has internal assembly extrusions with four guide rail positions for mounting PCBs. Two standard colours light grey and black Simple and fast assembly Removable internal chassis PCB guide rails in the assembly extrusions Aluminium front and rear panels Front panels recessed to protect controls Four push-in non-slip rubber feet
1 products found
JPY: 21,700
USD: 136.03
-
Aluminium Project Box, Black, 350 x 250 x 110mm M5503119
4 rubber feet, all fixings and assembly instructions. Unicase without Handle. The Unicase is a simple universal enclosures for measuring and control technology, feedback control, peripheral devices and interfaces, switchboxes, modems, medical field and laboratory technology. The design of the instrument case provides total access resulting in quick and simple assembly. The Unicase has internal assembly extrusions with four guide rail positions for mounting PCBs. Two standard colours light grey and black Simple and fast assembly Removable internal chassis PCB guide rails in the assembly extrusions Aluminium front and rear panels Front panels recessed to protect controls Four push-in non-slip rubber feet
1 products found
JPY: 38,300
USD: 240.08
-
Aluminium Project Box, Black, 185 x 180 x 65mm M5501119
4 rubber feet, all fixings and assembly instructions. Unicase without Handle. The Unicase is a simple universal enclosures for measuring and control technology, feedback control, peripheral devices and interfaces, switchboxes, modems, medical field and laboratory technology. The design of the instrument case provides total access resulting in quick and simple assembly. The Unicase has internal assembly extrusions with four guide rail positions for mounting PCBs. Two standard colours light grey and black Simple and fast assembly Removable internal chassis PCB guide rails in the assembly extrusions Aluminium front and rear panels Front panels recessed to protect controls Four push-in non-slip rubber feet
1 products found
JPY: 21,300
USD: 133.52
-
Aluminium Project Box, Black, 260 x 250 x 90mm M5502119
4 rubber feet, all fixings and assembly instructions. Unicase without Handle. The Unicase is a simple universal enclosures for measuring and control technology, feedback control, peripheral devices and interfaces, switchboxes, modems, medical field and laboratory technology. The design of the instrument case provides total access resulting in quick and simple assembly. The Unicase has internal assembly extrusions with four guide rail positions for mounting PCBs. Two standard colours light grey and black Simple and fast assembly Removable internal chassis PCB guide rails in the assembly extrusions Aluminium front and rear panels Front panels recessed to protect controls Four push-in non-slip rubber feet
1 products found
JPY: 28,600
USD: 179.28
-
Aluminium Project Box, Black, 261 x 300 x 134.5mm M5504119
4 rubber feet, all fixings and assembly instructions. Unicase without Handle. The Unicase is a simple universal enclosures for measuring and control technology, feedback control, peripheral devices and interfaces, switchboxes, modems, medical field and laboratory technology. The design of the instrument case provides total access resulting in quick and simple assembly. The Unicase has internal assembly extrusions with four guide rail positions for mounting PCBs. Two standard colours light grey and black Simple and fast assembly Removable internal chassis PCB guide rails in the assembly extrusions Aluminium front and rear panels Front panels recessed to protect controls Four push-in non-slip rubber feet
1 products found
JPY: 35,700
USD: 223.78
-
METCASE Unidesk, Sloped Front, Aluminium, 300 x 200 x 102mm Desktop Enclosure, Black M5330109RS
Unidesk Terminal Cases. An ergonomic sloping front enclosure for desktop or wall mounted applications. The Unidesk terminal case has a pre-assembled aluminium body with removable base panel. Robust enclosure designed to be house office system terminals, point of sale terminals, medical devices, industrial control equipment, security units and other types of electronics. Desk or wall mount Ergonomic front panel inclined 30° Flat rear section ideally suited to accept connectors and switches PCB mounting holes in base TÜV tested to IP54 (DIN EN 60529) Kit includes case, front panel, PCB mounting pillars and 4 'L' shaped sealing gaskets
1 products found
JPY: 73,300
USD: 459.48
-
METCASE Unidesk, Sloped Front, Aluminium, 400 x 200 x 102mm Desktop Enclosure, Black M5340109RS
Unidesk Terminal Cases. An ergonomic sloping front enclosure for desktop or wall mounted applications. The Unidesk terminal case has a pre-assembled aluminium body with removable base panel. Robust enclosure designed to be house office system terminals, point of sale terminals, medical devices, industrial control equipment, security units and other types of electronics. Desk or wall mount Ergonomic front panel inclined 30° Flat rear section ideally suited to accept connectors and switches PCB mounting holes in base TÜV tested to IP54 (DIN EN 60529) Kit includes case, front panel, PCB mounting pillars and 4 'L' shaped sealing gaskets
1 products found
JPY: 84,500
USD: 529.68
-
METCASE Unidesk, Sloped Front, Aluminium, 200 x 200 x 102mm Desktop Enclosure, Black M5320109RS
Unidesk Terminal Cases. An ergonomic sloping front enclosure for desktop or wall mounted applications. The Unidesk terminal case has a pre-assembled aluminium body with removable base panel. Robust enclosure designed to be house office system terminals, point of sale terminals, medical devices, industrial control equipment, security units and other types of electronics. Desk or wall mount Ergonomic front panel inclined 30° Flat rear section ideally suited to accept connectors and switches PCB mounting holes in base TÜV tested to IP54 (DIN EN 60529) Kit includes case, front panel, PCB mounting pillars and 4 'L' shaped sealing gaskets
1 products found
JPY: 62,700
USD: 393.03
-
Aluminium Project Box, Grey, 231.62 x 193.28 x 85.7mm M5623115
Anodised aluminium front panels, eg stock no. ; 342-9533 342-9533 and ABS tilt feet, stock no. ; 209-6205 209-6205 are available separately. Unimet Case without Handle. An advanced aluminium enclosure for desktop and portable electronic equipment such as controllers and medical devices. The Unimet instrument case has a pre-assembled internal chassis supplied with four snap-in PCB guides. The front and rear bezels fit to the fabricated case body. Easy to assemble case without handle Die-cast front bezel in mid-grey (RAL 7040) Folded top section, base and removable rear panel in light grey (RAL 7035) PCB mounting points in base 4 non-slip feet included
1 products found
JPY: 40,500
USD: 253.87
-
19-inch Front Panel, 3U, 95HP, Grey, Aluminium M6019001
Instrumet 19in. Case. A stylish 19" instrument case designed for mounting 3U subracks, chassis or front panels. The desktop version of these instrument cases have ABS side handles whereas the portable version has a tilt/swivel carry handle. Manufactured in aluminium and supplied fully assembled. Fully assembled 19in. case available as a desktop or portable version Front / rear bezel in mid-grey (RAL 7040) Top cover, base and rear panel in light grey (RAL 7035) Chassis supports 4 ABS tilt feet
1 products found
JPY: 7,160
USD: 44.88
-
Aluminium Project Box, Grey, 250 x 250 x 120mm M5725224
1 x front bezel, 2 x side extrusions, top and base covers, rear panel extrusion, 4 non slip feet and fixing screws. METcase Mettec Type A Cases. The Mettec Type A case consists of an aluminium front bezel, top and base covers and extruded side and rear panels. A high degree of shielding is guaranteed thanks to its masked internal faces and additional contact points. The guide ridges in the side extrusions of the Mettec case allow mounting of PCBs in several positions. Features and Benefits. Aluminium front bezel, top and base covers and extruded side and rear panels Front bezel recessed for fitting optional aluminium front panels Base panel fitted with earth stud Guide ridges in side extrusions for mounting PCBs All parts fully integrated for strength and shielding Supplied fully assembled Fine texture powder polyester finish Anthracite Grey RAL7016 or Off White RAL9002. Applications. The Mettec Type A case is designed for small desktop and portable electronics equipment. Applications include measuring and control technology, medical, laboratory and peripheral equipment for computers and networking.
1 products found
JPY: 58,600
USD: 367.33
-
Aluminium Project Box, White, 230 x 193 x 120mm M5723217
1 x front bezel, 2 x side extrusions, top and base covers, 1 x rear bezel, 4 non slip feet and fixing screws. Tilt and swivel handles only supplied with stock nos. ; 209-5858 209-5858 and ; 209-5779 209-5779. METcase Mettec Type B Cases. The Mettec Type B case has an aluminium front and rear bezel, top and base covers and extruded side panels. A high degree of shielding is guaranteed thanks to its masked internal faces and additional contact points. The guide ridges in the side extrusions of the Mettec case allow mounting of PCBs in several positions. Features and Benefits. Aluminium front and rear bezel, top and base covers and extruded side panels Front bezel recessed for fitting optional aluminium front panels Guide ridges in side extrusions for mounting PCBs All parts fully integrated for strength and shielding Supplied fully assembled Fine texture powder polyester finish. Applications. The Mettec Type A case is designed for small desktop and portable electronics equipment. Applications include measuring and control technology, medical, laboratory and peripheral equipment for computers and networking.
1 products found
JPY: 38,900
USD: 243.84
-
METCASE 219.5 x 2 x 65.1mm Front Panel Kit for use with Mettec Case M5700613
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 5,970
USD: 37.42
-
METCASE 319.5 x 2 x 65.1mm Front Panel Kit for use with Mettec Case M5700618
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 8,020
USD: 50.27
-
METCASE 199.5 x 2 x 100.1mm Front Panel Kit for use with Mettec Case M5700610
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 7,180
USD: 45.01
-
METCASE 219.5 x 2 x 100.1mm Front Panel Kit for use with Mettec Case M5700615
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 7,910
USD: 49.58
-
METCASE 319.5 x 2 x 100.1mm Front Panel Kit for use with Mettec Case M5700620
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 9,220
USD: 57.80
-
METCASE 219.5 x 2 x 130.1mm Front Panel Kit for use with Mettec Case M5700616
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 8,680
USD: 54.41
-
METCASE 319.5 x 2 x 130.1mm Front Panel Kit for use with Mettec Case M5700621
Two clip-on ABS Front Trims coloured Light Grey RAL 7035. For mini tower order as 120 x 230 mm cases. Mettec Front Panel Kit. Anodised aluminium panels 2mm thick which fit directly into front bezels and are recessed by 2mm to provide mounting for membrane keyboards, LEDs, switches etc Suitable for silk screen printing Clear anodised finish
1 products found
JPY: 9,640
USD: 60.43
