[Allegro Microsystems]Sensor ICs
Filters
-
A1101ELHLT-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin SOT-23 A1101ELHLT-T
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems. The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress. Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress. The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels. Continuous-time operation with fast power-on time and low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed at end of line for optimum performance Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 1,250
USD: 7.84
-
ACS712ELCTR-05B-T Allegro Microsystems, Linear Hall Effect Sensor, 8-Pin SOIC ACS712ELCTR-05B-T
Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems. Current sensing package with flip-chip technology 3000 Vrms galvanic isolation High accuracy over temperature Typical output error of 1%
1 products found
JPY: 630
USD: 3.95
-
ACS712ELCTR-20A-T Allegro Microsystems, Linear Hall Effect Sensor, 8-Pin SOIC ACS712ELCTR-20A-T
Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems. Current sensing package with flip-chip technology 3000 Vrms galvanic isolation High accuracy over temperature Typical output error of 1%
1 products found
JPY: 610
USD: 3.82
-
A1120EUA-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin SIP A1120EUA-T
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems. The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V. For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output. Unipolar switchpoints Resistant to physical stress Superior temperature stability Output short circuit protection Operation from unregulated supply
1 products found
JPY: 910
USD: 5.70
-
A1102EUA-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP A1102EUA-T
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems. The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress. Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress. The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels. Continuous-time operation with fast power-on time and low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed at end of line for optimum performance Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 1,250
USD: 7.84
-
ACS758LCB-050B-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB PFF ACS758LCB-050B-PFF-T
50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems. Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments 3000 Vrms galvanic isolation
1 products found
JPY: 1,680
USD: 10.53
-
A1120LUA-T Allegro Microsystems, Unipolar Hall Effect Sensor, 3-Pin SIP A1120LUA-T
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems. The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V. For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output. Unipolar switchpoints Resistant to physical stress Superior temperature stability Output short circuit protection Operation from unregulated supply
1 products found
JPY: 1,120
USD: 7.02
-
ACS758LCB-100U-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB ACS758LCB-100U-PFF-T
50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems. Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments 3000 Vrms galvanic isolation
1 products found
JPY: 1,630
USD: 10.22
-
ACS758LCB-050U-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB ACS758LCB-050U-PFF-T
50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems. Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments 3000 Vrms galvanic isolation
1 products found
JPY: 1,630
USD: 10.22
-
A1126LLHLT-T Allegro Microsystems, Omnipolar Hall Effect Sensor, 3-Pin SOT-23 A1126LLHLT-T
A1126 Chopper Stabilised Omnipolar Hall Effect Sensor Switches, Allegro Microsystems. The Allegro Microsystems A1126 is an omnipolar, ultrasensitive Hall-effect switch with a digital output. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output. This device has an integrated regulator permitting operation to 24 V. They are suitable for operation through extended temperature ranges from -40°C to 150°C. Activation the A1126 with either a north or a south polarity and without a magnetic field, the output is off. This magnetic polarity independence makes it an excellent replacement for reed switches. It also simplifies manufacturing as it does not require the magnets to be orientated. The A1126 is rated for operation between the ambient temperatures –40°C to 150°C. AEC-Q100 automotive qualified Omnipolar operation High speed, 4-phase chopper stabilisation Low switchpoint drift Superior temperature stability Insensitive to physical stress Reverse-battery protection Robust EMC capability Robust ESD
1 products found
JPY: 950
USD: 5.96
-
A1324LUA-T Allegro Microsystems, Linear Hall Effect Sensor, 3-Pin SIP A1324LUA-T
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems. The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively. Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package. Temperature-stable quiescent output voltage and sensitivity Output voltage proportional to magnetic flux density Low-noise output increases accuracy Precise recoverability after temperature cycling Ratiometric rail-to-rail output Wide ambient temperature range: –40°C to 150°C Immune to mechanical stress Solid-state reliability Enhanced EMC performance for stringent automotive applications
1 products found
JPY: 610
USD: 3.82
-
A1324LLHLT-T Allegro Microsystems, Linear Hall Effect Sensor, 3-Pin SOT-23 A1324LLHLT-T
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems. The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively. Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package. Temperature-stable quiescent output voltage and sensitivity Output voltage proportional to magnetic flux density Low-noise output increases accuracy Precise recoverability after temperature cycling Ratiometric rail-to-rail output Wide ambient temperature range: –40°C to 150°C Immune to mechanical stress Solid-state reliability Enhanced EMC performance for stringent automotive applications
1 products found
JPY: 590
USD: 3.70
-
A1326LLHLT-T Allegro Microsystems, Linear Hall Effect Sensor, 3-Pin SOT-23 A1326LLHLT-T
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems. The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively. Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package. Temperature-stable quiescent output voltage and sensitivity Output voltage proportional to magnetic flux density Low-noise output increases accuracy Precise recoverability after temperature cycling Ratiometric rail-to-rail output Wide ambient temperature range: –40°C to 150°C Immune to mechanical stress Solid-state reliability Enhanced EMC performance for stringent automotive applications
1 products found
JPY: 540
USD: 3.39
-
ACS711KLCTR-12AB-T Allegro Microsystems, Linear Hall Effect Sensor, 8-Pin SOIC ACS711KLCTR-12AB-T
Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems. Current sensing package with flip-chip technology 3000 Vrms galvanic isolation High accuracy over temperature Typical output error of 1%
1 products found
JPY: 450
USD: 2.82
-
ACS711KLCTR-25AB-T Allegro Microsystems, Linear Hall Effect Sensor, 8-Pin SOIC ACS711KLCTR-25AB-T
Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems. Current sensing package with flip-chip technology 3000 Vrms galvanic isolation High accuracy over temperature Typical output error of 1%
1 products found
JPY: 420
USD: 2.63
-
A1319LUA-5-T Allegro Microsystems, Linear Hall Effect Sensor, 3-Pin SIP A1319LUA-5-T
Hall Effect Sensor ICs, Allegro Microsystems. The A1318LUA-2-T A1319LUA-5-T by Allegro Microsystems are Hall-effect sensor ICs that are designed to fit angular positions with a high accuracy and small package size. The features of the Allegro A1318 and A1319 make them ideal for use in automotive and industrial applications requiring high accuracy, and operate across an extended temperature range, –40°C to 150°C linear Hall-effect sensor ICs have been designed specifically to meet these requirements. These temperature-stable devices are available in both surface-mount and through hole packages. The accuracy of each device is enhanced via end-of-line optimisation. Each BiCMOS monolithic circuit integrates a Hall element, temperature-compensating circuitry to reduce the intrinsic sensitivity drift of the Hall element, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. The A1318 and A1319 sensor ICs are offered in two package styles. The LH is a SOT-23W style, miniature, low profile package for surface-mount applications. The UA is a 3-pin, ultra-mini, single inline package (SIP) for through-hole mounting. Both packages are lead (Pb) free, with 100% matte tin leadframe plating.. 3.3 V supply operation QVO temperature coefficient programmed at Allegro™ for improved accuracy Miniature package options High bandwidth, low noise analog output High speed chopping scheme minimizes QVO drift across operating temperature range Temperature-stable quiescent voltage output and sensitivity Precise recoverability after temperature cycling Output voltage clamps provide short circuit diagnostic capabilities Undervoltage lockout (UVLO) Wide ambient temperature range: –40°C to 150°C Immune to mechanical stress Enhanced EMC performance for stringent automotive Applications
1 products found
JPY: 1,050
USD: 6.58
-
A3213ELHLT-T Allegro Microsystems, Omnipolar Hall Effect Sensor Switch, 3-Pin SOT-23 A3213ELHLT-T
A3213/4 Micropower Ultrasensitive Hall Effect Switches, Allegro Microsystems. The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. The A3213 to 825 μW and the A3214 to 14 μW (typical, at 2.75 V). Either a north or south pole turns on the output. They include a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output. AEC-Q100 automotive qualified Micropower operation Superior temperature stability Low switchpoint drift Insensitive to physical stress High ESD protection
1 products found
JPY: 760
USD: 4.76
-
ACS712ELCTR-05B-T Allegro Microsystems, Linear Hall Effect Sensor, 8-Pin SOIC ACS712ELCTR-05B-T
Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems. Current sensing package with flip-chip technology 3000 Vrms galvanic isolation High accuracy over temperature Typical output error of 1%
1 products found
JPY: 1,518,000
USD: 9,515.45
-
A1101EUA-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP A1101EUA-T
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems. The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress. Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress. The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels. Continuous-time operation with fast power-on time and low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed at end of line for optimum performance Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 1,250
USD: 7.84
-
A1104EUA-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP A1104EUA-T
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems. The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress. Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress. The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels. Continuous-time operation with fast power-on time and low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed at end of line for optimum performance Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 1,240
USD: 7.77
-
A1210LUA-T Allegro Microsystems, Bipolar Hall Effect Sensor, 3-Pin Ultra Mini SIP A1210LUA-T
A1210/1/2/3/4 Continuous Time Hall Effect Latches, Allegro Microsystems. The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum voltage rating for automotive and industrial motor commutation applications. All devices in the family are identical except for magnetic switchpoint levels. Available in a SOT23W, low profile surface-mount package or a three-lead ultramini SIP for through-hole mounting. AEC-Q100 automotive qualified Continuous-time operation Fast power-on time Low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 1,370
USD: 8.59
-
A1121LUA-T Allegro Microsystems, Unipolar Hall Effect Sensor, 3-Pin SIP A1121LUA-T
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems. The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V. For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output. Unipolar switchpoints Resistant to physical stress Superior temperature stability Output short circuit protection Operation from unregulated supply
1 products found
JPY: 1,010
USD: 6.33
-
ACS758ECB-200U-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB ACS758ECB-200U-PFF-T
50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems. Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments 3000 Vrms galvanic isolation
1 products found
JPY: 1,640
USD: 10.28
-
A1324LLHLT-T Allegro Microsystems, Linear Hall Effect Sensor, 3-Pin SOT-23 A1324LLHLT-T
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems. The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively. Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package. Temperature-stable quiescent output voltage and sensitivity Output voltage proportional to magnetic flux density Low-noise output increases accuracy Precise recoverability after temperature cycling Ratiometric rail-to-rail output Wide ambient temperature range: –40°C to 150°C Immune to mechanical stress Solid-state reliability Enhanced EMC performance for stringent automotive applications
1 products found
JPY: 720,000
USD: 4,513.26
-
ACS711KLCTR-12AB-T Allegro Microsystems, Linear Hall Effect Sensor, 8-Pin SOIC ACS711KLCTR-12AB-T
Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems. Current sensing package with flip-chip technology 3000 Vrms galvanic isolation High accuracy over temperature Typical output error of 1%
1 products found
JPY: 1,006,000
USD: 6,306.02
-
ACS711KLCTR-25AB-T Allegro Microsystems, Linear Hall Effect Sensor, 8-Pin SOIC ACS711KLCTR-25AB-T
Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems. Current sensing package with flip-chip technology 3000 Vrms galvanic isolation High accuracy over temperature Typical output error of 1%
1 products found
JPY: 1,006,000
USD: 6,306.02
-
A3213ELHLT-T Allegro Microsystems, Omnipolar Hall Effect Sensor Switch, 3-Pin SOT-23 A3213ELHLT-T
A3213/4 Micropower Ultrasensitive Hall Effect Switches, Allegro Microsystems. The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. The A3213 to 825 μW and the A3214 to 14 μW (typical, at 2.75 V). Either a north or south pole turns on the output. They include a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output. AEC-Q100 automotive qualified Micropower operation Superior temperature stability Low switchpoint drift Insensitive to physical stress High ESD protection
1 products found
JPY: 62,800
USD: 393.66
-
A1120EUA-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin SIP A1120EUA-T
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems. The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V. For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output. Unipolar switchpoints Resistant to physical stress Superior temperature stability Output short circuit protection Operation from unregulated supply
1 products found
JPY: 77,300
USD: 484.55
-
A1101EUA-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP A1101EUA-T
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems. The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress. Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress. The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels. Continuous-time operation with fast power-on time and low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed at end of line for optimum performance Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 109,000
USD: 683.26
-
A1102EUA-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP A1102EUA-T
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems. The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress. Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress. The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels. Continuous-time operation with fast power-on time and low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed at end of line for optimum performance Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 109,000
USD: 683.26
-
A1104EUA-T Allegro Microsystems, Unipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP A1104EUA-T
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems. The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress. Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress. The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels. Continuous-time operation with fast power-on time and low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed at end of line for optimum performance Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 83,400
USD: 522.79
-
A1210LUA-T Allegro Microsystems, Bipolar Hall Effect Sensor, 3-Pin Ultra Mini SIP A1210LUA-T
A1210/1/2/3/4 Continuous Time Hall Effect Latches, Allegro Microsystems. The Allegro Microsystems A1210/1/2/3/4 Hall-effect latches include a voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The voltage regulator enables operation from 3.8 V to 24 V. On-board protection circuitry provides a ±30 V absolute maximum voltage rating for automotive and industrial motor commutation applications. All devices in the family are identical except for magnetic switchpoint levels. Available in a SOT23W, low profile surface-mount package or a three-lead ultramini SIP for through-hole mounting. AEC-Q100 automotive qualified Continuous-time operation Fast power-on time Low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Robust EMC performance High ESD rating Regulator stability without a bypass capacitor
1 products found
JPY: 120,000
USD: 752.21
-
A3213EUA-T Allegro Microsystems, Omnipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP A3213EUA-T
A3213/4 Micropower Ultrasensitive Hall Effect Switches, Allegro Microsystems. The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. The A3213 to 825 μW and the A3214 to 14 μW (typical, at 2.75 V). Either a north or south pole turns on the output. They include a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output. AEC-Q100 automotive qualified Micropower operation Superior temperature stability Low switchpoint drift Insensitive to physical stress High ESD protection
1 products found
JPY: 63,800
USD: 399.93
-
ACS758LCB-050B-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB PFF ACS758LCB-050B-PFF-T
50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems. Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments 3000 Vrms galvanic isolation
1 products found
JPY: 54,700
USD: 342.88
-
A1120LUA-T Allegro Microsystems, Unipolar Hall Effect Sensor, 3-Pin SIP A1120LUA-T
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems. The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V. For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output. Unipolar switchpoints Resistant to physical stress Superior temperature stability Output short circuit protection Operation from unregulated supply
1 products found
JPY: 88,800
USD: 556.64
-
A1121LUA-T Allegro Microsystems, Unipolar Hall Effect Sensor, 3-Pin SIP A1121LUA-T
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems. The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V. For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output. Unipolar switchpoints Resistant to physical stress Superior temperature stability Output short circuit protection Operation from unregulated supply
1 products found
JPY: 98,100
USD: 614.93
-
A1220LUA-T Allegro Microsystems, Bipolar Hall Effect Sensor, 3-Pin SIP A1220LUA-T
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems. The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA. A south pole turns on the output and a north pole turns off the output. The voltage regulator permits operation with supply voltages of 3 V to 24 V. Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting. AEC-Q100 automotive qualified Symmetrical latch switchpoints Resistant to physical stress Superior temperature stability Output short circuit protection Operation from unregulated supply down to 3 V Reverse battery protection
1 products found
JPY: 80,300
USD: 503.35
-
ACS758ECB-200U-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB ACS758ECB-200U-PFF-T
50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems. Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments 3000 Vrms galvanic isolation
1 products found
JPY: 54,700
USD: 342.88
-
ACS758LCB-100U-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB ACS758LCB-100U-PFF-T
50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems. Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments 3000 Vrms galvanic isolation
1 products found
JPY: 54,700
USD: 342.88
-
ACS758LCB-050U-PFF-T Allegro Microsystems, Linear Hall Effect Sensor, 5-Pin CB ACS758LCB-050U-PFF-T
50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems. Allegro Current sensor ICs in CA and CB packages Conductor resistance of 100 μΩ typical for ultra low-power loss Automotive grade options for harsh applications environments 3000 Vrms galvanic isolation
1 products found
JPY: 54,700
USD: 342.88
