PULS

PULS, DIMENSION Q DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 20A output current　QT20.241

Dimension Q Series. The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation. Single-phase or three-phase units from 80 to 960W Active power factor correction Minimal inrush current 50% power reserves for typ. 4s controlled by an intelligent power manager Quick-connect spring-clamp terminals DC-ok LED and overload LED DC-ok relay contact DC Input from 88-375V for single phase Active filtering of input transients Short term operation down to 60Vac and up to 300Vac Parallel and serial use

PULS

PULS DIMENSION-CD 96W Isolated DC-DC Converter DIN Rail Mount, Voltage in 8.4 → 16.2 V dc, Voltage out 24V dc　CD5.243

Dimension C-Series DC/DC Converters. The DIMENSION CD-series offer DIN Rail DC-DC converters in the 92 W to 120 W output power range in compact housing. These DC-DC converters are allowed to run with a battery or similar sources. This range includes all the essential basic functions and has a power reserve of 20% included. This extra power can be used continuously up to 45°C. The output is electrically isolated from the input in a safe way. The input is protected against reversed voltages and contains a soft start function. Features and Benefits.

PULS

PULS, DIMENSION Q DIN Rail Panel Mount Power Supply, 48V dc Output Voltage, 10A output current　QT20.481

Dimension Q Series. The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation. Single-phase or three-phase units from 80 to 960W Active power factor correction Minimal inrush current 50% power reserves for typ. 4s controlled by an intelligent power manager Quick-connect spring-clamp terminals DC-ok LED and overload LED DC-ok relay contact DC Input from 88-375V for single phase Active filtering of input transients Short term operation down to 60Vac and up to 300Vac Parallel and serial use

PULS

PULS DIMENSION-CD 96W Isolated DC-DC Converter DIN Rail Mount, Voltage in 18 → 32.4 V dc, Voltage out 12V dc　CD5.121

Dimension C-Series DC/DC Converters. The DIMENSION CD-series offer DIN Rail DC-DC converters in the 92 W to 120 W output power range in compact housing. These DC-DC converters are allowed to run with a battery or similar sources. This range includes all the essential basic functions and has a power reserve of 20% included. This extra power can be used continuously up to 45°C. The output is electrically isolated from the input in a safe way. The input is protected against reversed voltages and contains a soft start function. Features and Benefits. DC-DC converter, isolated output 28 V input, 24 V output Efficiency up to 90.3% Negligibly low input inrush current 20% power reserves can be used continuously up to 45°C. Product Application Information. Ideal for use in many industries including, automotive, machine building, material handling, building automation, and so on.

PULS

PULS DIMENSION-CD 120W Isolated DC-DC Converter DIN Rail Mount, Voltage in 18 → 32.4 V dc, Voltage out 24V dc　CD5.241

Dimension C-Series DC/DC Converters. The DIMENSION CD-series offer DIN Rail DC-DC converters in the 92 W to 120 W output power range in compact housing. These DC-DC converters are allowed to run with a battery or similar sources. This range includes all the essential basic functions and has a power reserve of 20% included. This extra power can be used continuously up to 45°C. The output is electrically isolated from the input in a safe way. The input is protected against reversed voltages and contains a soft start function. Features and Benefits. DC-DC converter, isolated output 28 V input, 24 V output Efficiency up to 90.3% Negligibly low input inrush current 20% power reserves can be used continuously up to 45°C. Product Application Information. Ideal for use in many industries including, automotive, machine building, material handling, building automation, and so on.

PULS

PULS, DIMENSION C-Line DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 5A output current　CT5.241

UL60950-1, UL508, IEC60950-1. UL Listed. Power de-rating @ +60 to +70°C. Dimension C-Series - Puls Power Supplies. The C-Series DIN Rail power supplies are affordable basic units which offer an alternative to the feature-rich Q-Series. The same standards apply to the C-Series Puls power supplies as to all other PULS products in terms of quality. They are reliable, easy to operate, have a small overall size and generous power reserves. In the 120W class, the C-Series power supplies are even smaller than the Q Series and yet are every bit as durable. This power supply has a specified life expectancy of the electrolytic capacitor of 50,000 hours. The guaranteed power boost of +20% of the rated power is intended to ensure optimal adaptation to fluctuating loads. If the ambient temperature remains below 45°C or with forced ventilation, this performance is even specified for continuous loads. The units are equipped with automatic 115/230 V range switching for increased ease of operation and fault avoidance. The units are available in special regional versions that cover either the 100 V to 120 V or 200 V to 240 V ranges. The C series Puls power supply supports regional applications and offers extra cost savings without sacrificing functionality. Features and Benefits. Wide range auto select input. Minimal inrush current. 20% Power reserves up to 45°C continuously allowed. Large screw terminals. CS10.242 has power factor correction to EN61000-3-2. DC-ok LED. Cost effective

PULS

PULS, DIMENSION Q DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 40A output current　QT40.241

Dimension Q Series. The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation. Single-phase or three-phase units from 80 to 960W Active power factor correction Minimal inrush current 50% power reserves for typ. 4s controlled by an intelligent power manager Quick-connect spring-clamp terminals DC-ok LED and overload LED DC-ok relay contact DC Input from 88-375V for single phase Active filtering of input transients Short term operation down to 60Vac and up to 300Vac Parallel and serial use

PULS

PULS, DIMENSION Q DIN Rail Panel Mount Power Supply, 48V dc Output Voltage, 20A output current　QT40.481

Dimension Q Series. The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission make these PSU,s usable in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. The Q-Series power supplies diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes these PSU's suitable for nearly every situation. Single-phase or three-phase units from 80 to 960W Active power factor correction Minimal inrush current 50% power reserves for typ. 4s controlled by an intelligent power manager Quick-connect spring-clamp terminals DC-ok LED and overload LED DC-ok relay contact DC Input from 88-375V for single phase Active filtering of input transients Short term operation down to 60Vac and up to 300Vac Parallel and serial use

PULS

PULS Redundancy Module for use with 40 A Power Supply　YR80.241

UL 60950-1, UL 508, IEC 60950-1. UL/UL Listed for Canada. Dimension, Decoupling Module 20A. For N+1 and 1+1 Redundant Systems Dual Input with Single Output Suitable for all Power Supplies Only 72mV Voltage Drop at 20A Output Current Only 2.15W Loss at 20A and 6.3W at 40A Output Current 160% (65A) Peak Load Capability Reverse Input Polarity Protection Full Power Between -40°C and +70°C Width only 36mm Rugged Metal Housing

PULS

PULS Redundancy Module for use with 20 A Power Supply　YR40.241

UL 60950-1, UL 508, IEC 60950-1. UL/UL Listed for Canada. Dimension, Decoupling Module 20A. For N+1 and 1+1 Redundant Systems Dual Input with Single Output Suitable for all Power Supplies Only 72mV Voltage Drop at 20A Output Current Only 2.15W Loss at 20A and 6.3W at 40A Output Current 160% (65A) Peak Load Capability Reverse Input Polarity Protection Full Power Between -40°C and +70°C Width only 36mm Rugged Metal Housing

PULS

PULS DIMENSION UPS Uninterruptible Power Supply, 22.25V Output, 10A　UB10.242

UL 60950-1, UL 508, IEC 60950-1. UL/UL Listed for Canada. Dimension U-Series, DC-UPS. This DC-UPS controller is an addition to standard 24V power supplies to bridge power failures of voltage fluctuations. It avoids expensive downtimes and long restart cycles. Soft charger for optimum battery life Constant output voltage in buffer mode Buffer time more than 6min at 10A, 7Ah battery Low voltage drop between input and output 50% Power reserves Electronically protected against output overloads Extensive battery management including battery quality installation tests Extensive and smart diagnostic and monitoring functions Easy to install and use, thanks to Plug ; Play concept Relay contacts for remote monitoring

PULS

PULS, MiniLine MLY Dual Redundancy Module, 24V dc Output Voltage, 10A output current　MLY10.241

EN60950, UL508, CSA22-2 No. 950-M90, EN50178. UL/UL Listed for Canada. * : Auto range. ** : Preset voltage with jumper fitted. Power de-rating @ +50 to +70°C. 15W to 100W, Switch Mode, MiniLine Series. Miniature size and lightweight Quick and easy mounting onto 35mm DIN-rail Spring clamp terminals 72W and 100W meet PFC standard EN61000-3-2 Adjustable output voltage Overload and short circuit protected Output LED indicator Suitable for use in harsh environment

PULS

PULS DIMENSION UPS Uninterruptible Power Supply, 12 → 22V dc Output, 360W, 10A　UB10.245

UL 60950-1, UL 508, IEC 60950-1. UL/UL Listed for Canada. Dimension U-Series, DC-UPS. This DC-UPS controller is an addition to standard 24V power supplies to bridge power failures of voltage fluctuations. It avoids expensive downtimes and long restart cycles. Soft charger for optimum battery life Constant output voltage in buffer mode Buffer time more than 6min at 10A, 7Ah battery Low voltage drop between input and output 50% Power reserves Electronically protected against output overloads Extensive battery management including battery quality installation tests Extensive and smart diagnostic and monitoring functions Easy to install and use, thanks to Plug ; Play concept Relay contacts for remote monitoring

PULS

PULS, DIMENSION DIN Rail Panel Mount Power Supply, 18 → 60V dc Output Voltage, 20A output current　YRM2.DIODE

UL 60950-1, UL 508, IEC 60950-1. UL/UL Listed for Canada. Dimension, Decoupling Module 20A. For N+1 and 1+1 Redundant Systems Dual Input with Single Output Suitable for all Power Supplies Only 72mV Voltage Drop at 20A Output Current Only 2.15W Loss at 20A and 6.3W at 40A Output Current 160% (65A) Peak Load Capability Reverse Input Polarity Protection Full Power Between -40°C and +70°C Width only 36mm Rugged Metal Housing

PULS

PULS UPS Control Unit, 24V dc Output Voltage, 20A output current　UB20.241

UL 60950-1, UL 508, IEC 60950-1. UL/UL Listed for Canada. Dimension U-Series, DC-UPS. This DC-UPS controller is an addition to standard 24V power supplies to bridge power failures of voltage fluctuations. It avoids expensive downtimes and long restart cycles. Soft charger for optimum battery life Constant output voltage in buffer mode Buffer time more than 6min at 10A, 7Ah battery Low voltage drop between input and output 50% Power reserves Electronically protected against output overloads Extensive battery management including battery quality installation tests Extensive and smart diagnostic and monitoring functions Easy to install and use, thanks to Plug ; Play concept Relay contacts for remote monitoring

PULS

PULS Dual Input Redundancy Module for use with Power Supplies　PIRD20.241

UL 508 Listed USA and Canada, UL 60950-1 USA and Canada, EU Declaration of Conformity, EAC. PIANO Series Diode Redundancy Module. The PIRD20.241 is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 10A output current and two outputs, which can carry nominal currents up to 20A. The module is suitable for power supplies with constant current overload behaviour and any kind of hiccup overload behaviour. The PIRD20.241 is the perfect solution to use in a redundant system, if the power supply itself is equipped with a DC-OK signal. Features and Benefits. Cost effective. Dual input and output. Two diodes (common cathode). DC 12-28 V ±25% wide range input. Full power between -40°C and +55°C. Large screw terminals. Product Application Information. Ideal for use in redundant systems and for separating sensitive loads from non-sensitive loads.

PULS

PULS DIMENSION-CD 120W Isolated DC-DC Converter DIN Rail Mount, Voltage in 36 → 60 V dc, Voltage out 24V dc　CD5.242

Dimension C-Series DC/DC Converters. The DIMENSION CD-series offer DIN Rail DC-DC converters in the 92 W to 120 W output power range in compact housing. These DC-DC converters are allowed to run with a battery or similar sources. This range includes all the essential basic functions and has a power reserve of 20% included. This extra power can be used continuously up to 45°C. The output is electrically isolated from the input in a safe way. The input is protected against reversed voltages and contains a soft start function. Features and Benefits. DC-DC converter, isolated output 28 V input, 24 V output Efficiency up to 90.3% Negligibly low input inrush current 20% power reserves can be used continuously up to 45°C. Product Application Information. Ideal for use in many industries including, automotive, machine building, material handling, building automation, and so on.

PULS

PULS, MiniLine MLY DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 4.2A output current　ML100.200

EN60950, UL508, CSA22-2 No. 950-M90, EN50178. UL/UL Listed for Canada. * : Auto range. ** : Preset voltage with jumper fitted. Power de-rating @ +50 to +70°C. 15W to 100W, Switch Mode, MiniLine Series. Miniature size and lightweight Quick and easy mounting onto 35mm DIN-rail Spring clamp terminals 72W and 100W meet PFC standard EN61000-3-2 Adjustable output voltage Overload and short circuit protected Output LED indicator Suitable for use in harsh environment

PULS

PULS for use with N+1 Redundant Systems, 1+1 Redundant Systems　YR20.242

PULS

PULS for use with 1+1 Redundancy with Automated Load Sharing　YR20.246

PULS

PULS CD 240W Isolated DC-DC Converter DIN Rail Mount, Voltage in 18 → 35 V dc, Voltage out 24V dc　CD10.241

Insulated DC-DC converter

PULS

PULS, Q DIN Rail Power Supply, 24V dc Output Voltage, 20A output current　QTD20.241

Power supply for mounting DIN rail

PULS

PULS CD 240W Isolated DC-DC Converter DIN Rail Mount, Voltage out 48V dc　CD10.482

Insulated DC-DC converter

PULS

［Discontinued］PULS DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 4.3 → 5A output current　SL5.300

UL/UL Listed for Canada. * : Auto range. Power de-rating @ +60 to +70°C. 40W to 960W, Single/Three Phase Silverline Series with Power Boost. 3-phase units SL10 ; SL20 offer a choice of overload response. In FUSE mode, in the event of an overload the unit switches off, in CONTINUOUS mode the unit will offer up to 80% more current at a reduced output power Integral input fuse; electronic output protection Option available for operating in parallel using jumpers Output LED indication Patented quick and easy assembly on to DIN rail Power boost feature. The unit delivers a higher current for brief periods with no loss in output voltage. When the load continues beyond this period the PULS overload design takes over, reducing the voltage Permanent 25% extra power @ >45°C