[BALLUFF]Electronic/Electrical Parts and Controll Equipments
Filters
- by Product group
- by Product
Sort by:
-
BALLUFF Inductive Sensor 2 mm Detection, M12 x 1, PNP-NO, 70mm Length, 10 → 30 V dc supply voltage BES 516-325-S4-C
M8 to M30 Standard Design Inductive Proximity Sensors. Flush-mounting 3-wire, PNP, N/O Operating voltage 10 → 30 V DC Short-circuit proof and reverse polarity protection
1 products found
JPY: 23,200
USD: 145.43
-
BALLUFF M8 3-Pin Female Connecting Cable for use with M8 Sensor Connectors, 60 V BCC M313-0000-10-001-PX0334-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 4,760
USD: 29.84
-
BALLUFF Inductive Sensor 4 mm Detection, M12 x 1, PNP-NO, 65mm Length, 12 → 30 V dc supply voltage BES M12MI-PSC40B-S04G
3 / 4-Wire Flush Inductive Proximity Sensors. Features and benefits. Can be embedded in metal with a minimal flush free zone. Short circuit and polarity reversal protection. LED for visual indication of output state
1 products found
JPY: 10,300
USD: 64.57
-
BALLUFF BMF 303 Series Bracket, For Use With Pneumatic cylinder BMF 303-HW-33
Mini solenoid switch BMF 303K. Electronic switch Bounce-free switching, no multiple switch points M8 connector Automotive approved Protection class IP67 Operating voltage 10 → 30 Vdc 3-cable, PNP, NO. Solenoid switch for pneumatic cylinders. Miniature design. Also suitable for C-slots. These sensors let you identify the piston position of pneumatic cylinders through the cylinder wall. Wear and contact-free. Holding brackets / slot nuts available for all commonly available cylinders. Reduced storage - only 1 sensor for different cylinders.
1 products found
JPY: 3,430
USD: 21.50
-
BALLUFF Inductive Sensor 5 mm Detection, M18 x 1, PNP-NO, 65mm Length, 12 → 30 V dc supply voltage BES M18MI-PSC50B-S04G
Economy Sensor M12, M18. Flush-mountable 3-cable, PNP, N/O Operating voltage 10 → 30 V DC Short-circuit proof and reverse polarity proof Protection class IP67 Protection class 2 Continuous screw thread Automotive approved
1 products found
JPY: 12,500
USD: 78.36
-
BALLUFF PNP Hall Effect Sensor supply voltage 10 → 30 V dc BMF 305K-PS-C-2-S49-00,2
Starter solenoid switch BMF 305K. Electronic switch Bounce-free switching, no multiple switch points M8 and M12 plug connectors Automotive approved Protection class IP67 Operating voltage 10 → 30 Vdc 3-cable, PNP, NO. Solenoid switch for pneumatic cylinders. "One for all": These sensors let you identify the piston position of pneumatic cylinders through the cylinder wall. Wear and contact-free. Holding brackets / slot nuts available for all commonly available cylinders. Reduced storage - only 1 sensor for different cylinders.
1 products found
JPY: 18,600
USD: 116.59
-
BALLUFF PNP Hall Effect Sensor supply voltage 10 → 30 V dc BMF 305K-PS-C-2-S4-00,5
Starter solenoid switch BMF 305K. Electronic switch Bounce-free switching, no multiple switch points M8 and M12 plug connectors Automotive approved Protection class IP67 Operating voltage 10 → 30 Vdc 3-cable, PNP, NO. Solenoid switch for pneumatic cylinders. "One for all": These sensors let you identify the piston position of pneumatic cylinders through the cylinder wall. Wear and contact-free. Holding brackets / slot nuts available for all commonly available cylinders. Reduced storage - only 1 sensor for different cylinders.
1 products found
JPY: 19,300
USD: 120.98
-
BALLUFF Inductive Sensor 1.5 mm Detection, M8 x 1, PNP-NO, 44mm Length, 10 → 30 V dc supply voltage BES 516-324-G-E5-C-S49
Inductive sensor, short design M8-M30. Flush-mountable Short design Large switch gap 3-wire, PNP, N/O Operating voltage 10 → 30 Vdc Short-circuit proof and reverse polarity proof Protection class IP67 Protection class 2 Automotive approved
1 products found
JPY: 25,800
USD: 161.73
-
BALLUFF Inductive Sensor 4 mm Detection, M12 x 1, PNP-NO, 45mm Length, 10 → 30 V dc supply voltage BES516-325-G-E5-C-S4
Inductive sensor, short design M8-M30. Flush-mountable Short design Large switch gap 3-wire, PNP, N/O Operating voltage 10 → 30 Vdc Short-circuit proof and reverse polarity proof Protection class IP67 Protection class 2 Automotive approved
1 products found
JPY: 21,900
USD: 137.28
-
BALLUFF Inductive Sensor 4 mm Detection, M8 x 1, PNP-NO, 59mm Length, 10 → 30 V dc supply voltage BES M08MI-PSC40B-S49G
3 / 4-Wire Flush Inductive Proximity Sensors. Features and benefits. Can be embedded in metal with a minimal flush free zone. Short circuit and polarity reversal protection. LED for visual indication of output state
1 products found
JPY: 31,000
USD: 194.32
-
BALLUFF Inductive Sensor 4 mm Detection, M8 x 1, NPN-NO, 59mm Length, 10 → 30 V dc supply voltage BES M08MI-NSC40B-S49G
3 / 4-Wire Flush Inductive Proximity Sensors. Features and benefits. Can be embedded in metal with a minimal flush free zone. Short circuit and polarity reversal protection. LED for visual indication of output state
1 products found
JPY: 26,800
USD: 167.99
-
BALLUFF Analogue Tester & Programmer for use with BES Series BES 516-4
Accessories. Balluff range of accessories for sensors. Mounting brackets Mounting cuffs Capacitive Sensor amplifiers Programmers Sensor reflectors
1 products found
JPY: 69,300
USD: 434.40
-
BALLUFF BGL Photoelectric Sensor Through Beam (Fork) 120 mm Detection Range PNP BGL 120A-001-S49
BGL Type Slotted Switch. Unbeatable when it comes to accuracy, small component detection and detail recognition! High level of site safety and no complex adjustment required by sender and receiver. These are the great advantages of a slotted switch. The sender and receiver are securely enclosed in robust metal housing. The large palette of slotted switches in the widest range of slot widths enables maximum flexibility to suit the required application. Just one cable connection required Active glass surface High switching frequency Adjustable sensitivity control Reversible switching (PNP NO / NC) LED display Red emitted light Supply voltage 10 → 30 VDC
1 products found
JPY: 68,400
USD: 428.76
-
BALLUFF Inductive Sensor 5 mm Detection PNP-NO, 48mm Length, 10 → 30 V dc supply voltage BES 516-346-H2-Y
Inductive proximity switch, pin switch design. Sensors in die-cast aluminium housing Housing compatible with mechanical precision pin switches in accordance with DIN 43 693 Available with plug connector or cable gland
1 products found
JPY: 34,300
USD: 215.01
-
BALLUFF BGL Photoelectric Sensor Through Beam (Fork) 5 mm Detection Range PNP BGL 5 A-001-S49
BGL Type Slotted Switch. Unbeatable when it comes to accuracy, small component detection and detail recognition! High level of site safety and no complex adjustment required by sender and receiver. These are the great advantages of a slotted switch. The sender and receiver are securely enclosed in robust metal housing. The large palette of slotted switches in the widest range of slot widths enables maximum flexibility to suit the required application. Just one cable connection required Active glass surface High switching frequency Adjustable sensitivity control Reversible switching (PNP NO / NC) LED display Red emitted light Supply voltage 10 → 30 VDC
1 products found
JPY: 40,900
USD: 256.38
-
BALLUFF BGL Photoelectric Sensor Through Beam (Fork) 10 mm Detection Range PNP BGL 10 A-001-S49
BGL Type Slotted Switch. Unbeatable when it comes to accuracy, small component detection and detail recognition! High level of site safety and no complex adjustment required by sender and receiver. These are the great advantages of a slotted switch. The sender and receiver are securely enclosed in robust metal housing. The large palette of slotted switches in the widest range of slot widths enables maximum flexibility to suit the required application. Just one cable connection required Active glass surface High switching frequency Adjustable sensitivity control Reversible switching (PNP NO / NC) LED display Red emitted light Supply voltage 10 → 30 VDC
1 products found
JPY: 43,200
USD: 270.80
-
BALLUFF BGL Photoelectric Sensor Through Beam (Fork) 30 mm Detection Range PNP BGL 30 A-001-S49
BGL Type Slotted Switch. Unbeatable when it comes to accuracy, small component detection and detail recognition! High level of site safety and no complex adjustment required by sender and receiver. These are the great advantages of a slotted switch. The sender and receiver are securely enclosed in robust metal housing. The large palette of slotted switches in the widest range of slot widths enables maximum flexibility to suit the required application. Just one cable connection required Active glass surface High switching frequency Adjustable sensitivity control Reversible switching (PNP NO / NC) LED display Red emitted light Supply voltage 10 → 30 VDC
1 products found
JPY: 51,800
USD: 324.70
-
BALLUFF BGL Photoelectric Sensor Through Beam (Fork) 50 mm Detection Range PNP BGL 50 A-001-S49
BGL Type Slotted Switch. Unbeatable when it comes to accuracy, small component detection and detail recognition! High level of site safety and no complex adjustment required by sender and receiver. These are the great advantages of a slotted switch. The sender and receiver are securely enclosed in robust metal housing. The large palette of slotted switches in the widest range of slot widths enables maximum flexibility to suit the required application. Just one cable connection required Active glass surface High switching frequency Adjustable sensitivity control Reversible switching (PNP NO / NC) LED display Red emitted light Supply voltage 10 → 30 VDC
1 products found
JPY: 57,700
USD: 361.69
-
BALLUFF BGL Photoelectric Sensor Through Beam (Fork) 80 mm Detection Range PNP BGL 80 A-001-S49
BGL Type Slotted Switch. Unbeatable when it comes to accuracy, small component detection and detail recognition! High level of site safety and no complex adjustment required by sender and receiver. These are the great advantages of a slotted switch. The sender and receiver are securely enclosed in robust metal housing. The large palette of slotted switches in the widest range of slot widths enables maximum flexibility to suit the required application. Just one cable connection required Active glass surface High switching frequency Adjustable sensitivity control Reversible switching (PNP NO / NC) LED display Red emitted light Supply voltage 10 → 30 VDC
1 products found
JPY: 67,500
USD: 423.12
-
BALLUFF BOWA Photoelectric Sensor Through Beam (Fork) 80 mm Detection Range PNP BOWA 0808-PS-C-S49
CE. BOWA - frame light barrier. Frame light barriers with high resolution Dynamic operation, only moving objects are recognised; feed chutes etc. do not influence measurement Adjustable output signal length Adjustable sensitivity LED status displays. Application. Compressed air supply of small components Broken filament control Ejection control Count/separate parts
1 products found
JPY: 265,000
USD: 1,661.13
-
BALLUFF Inductive Sensor 1.5 mm Detection PNP-NO, 30.5mm Length, 10 → 30 V dc supply voltage BES R04KC-PSC15B-EP00,2-GS26
CE, UL. BES R04 Small Design Inductive Sensors. Proximity switch in rectangular housing Can be installed flush LED display for switching status
1 products found
JPY: 26,100
USD: 163.61
-
BALLUFF BGL Photoelectric Sensor Through Beam (Fork) 80 mm Detection Range PNP BGL-80A-003-S49
BGL Type Slotted Switch. Unbeatable when it comes to accuracy, small component detection and detail recognition! High level of site safety and no complex adjustment required by sender and receiver. These are the great advantages of a slotted switch. The sender and receiver are securely enclosed in robust metal housing. The large palette of slotted switches in the widest range of slot widths enables maximum flexibility to suit the required application. Just one cable connection required Active glass surface High switching frequency Adjustable sensitivity control Reversible switching (PNP NO / NC) LED display Red emitted light Supply voltage 10 → 30 VDC
1 products found
JPY: 73,900
USD: 463.24
-
BALLUFF Inductive Sensor 1.5 mm Detection PNP-NO, 22.5mm Length, 10 → 30 V dc supply voltage BES 516-371-SA-10-PU-03
CE, UL. BES R04 Small Design Inductive Sensors. Proximity switch in rectangular housing Can be installed flush LED display for switching status
1 products found
JPY: 55,300
USD: 346.64
-
BALLUFF M8 3-Pin Female Connecting Cable for use with M8 Sensor Connectors, 60 V BCC M323-0000-10-001-VX8334-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 3,570
USD: 22.38
-
BALLUFF M8 4-pin Female Connecting Cable for use with M8 Sensor Connectors, 60 V BCC M314-0000-10-003-PX0434-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 5,270
USD: 33.04
-
BALLUFF M8 4-Pin Female Connecting Cable for use with M8 Sensor Connectors, 30 V BCC M324-0000-10-003-PX0434-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 5,270
USD: 33.04
-
BALLUFF M8 3-Pin Female Connecting Cable for use with M8 Sensor Connectors, 60 V BCC M323-0000-10-001-PX0334-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 4,970
USD: 31.15
-
BALLUFF Connecting Cable for use with M12 Angled Connector BCC M425-0000-1A-003-PX0434-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 5,670
USD: 35.54
-
BALLUFF Inductive Sensor 1.5 mm Detection, M8 x 1, PNP-NO, 65mm Length, 12 → 30 V dc supply voltage BES M08MH1-PSC15B-S04G
3 / 4-Wire Flush Inductive Proximity Sensors. Features and benefits. Can be embedded in metal with a minimal flush free zone. Short circuit and polarity reversal protection. LED for visual indication of output state
1 products found
JPY: 12,100
USD: 75.85
-
BALLUFF Inductive Sensor 2 mm Detection, M8 x 1, PNP-NO, 59mm Length, 12 → 30 V dc supply voltage BES M08MI-PSC20B-S49G
3 / 4-Wire Flush Inductive Proximity Sensors. Features and benefits. Can be embedded in metal with a minimal flush free zone. Short circuit and polarity reversal protection. LED for visual indication of output state
1 products found
JPY: 13,500
USD: 84.62
-
BALLUFF Inductive Sensor 8 mm Detection, M18 x 1, PNP-NO, 65mm Length, 10 → 30 V dc supply voltage BES M18MI-PSC80B-S04G
3 / 4-Wire Flush Inductive Proximity Sensors. Features and benefits. Can be embedded in metal with a minimal flush free zone. Short circuit and polarity reversal protection. LED for visual indication of output state
1 products found
JPY: 13,800
USD: 86.50
-
BALLUFF Inductive Sensor 10 mm Detection, M30 x 1.5, PNP-NO, 65mm Length, 12 → 30 V dc supply voltage BES M30MI-PSC10B-S04K
3 / 4-Wire Flush Inductive Proximity Sensors. Features and benefits. Can be embedded in metal with a minimal flush free zone. Short circuit and polarity reversal protection. LED for visual indication of output state
1 products found
JPY: 17,000
USD: 106.56
-
BALLUFF Inductive Sensor 1.5 mm Detection, M8 x 1, PNP-NO, 43mm Length, 10 → 30 V dc supply voltage BES M08EE-PSC15B-S04G
3 / 4-Wire Flush Inductive Proximity Sensors. Features and benefits. Can be embedded in metal with a minimal flush free zone. Short circuit and polarity reversal protection. LED for visual indication of output state
1 products found
JPY: 21,400
USD: 134.14
-
BALLUFF M8 3-Pin Female Cable & Connector for use with Photoelectric Sensor BCC M313-0000-10-001-VX8334-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 3,470
USD: 21.75
-
BALLUFF M12 5-Pin Female Cable & Connector for use with Photoelectric Sensor BCC M415-0000-1A-003-VX8434-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 4,050
USD: 25.39
-
BALLUFF Inductive Sensor 4 mm Detection, M12 x 1, PNP-NO, 53mm Length, 12 → 30 V dc supply voltage BES M12MI-PSC40B-BV03
BES 3 / 4 Wire M12 Inductive Proximity Sensors. This range of M12 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide variety of metal detection applications with in industrial environments. Pre cabled or connector Flush shielded or non-flush unshielded 3 ; 4 wire DC configuration
1 products found
JPY: 11,000
USD: 68.95
-
BALLUFF Inductive Sensor 1.5 mm Detection, M8 x 1, PNP-NO, 60mm Length, 12 → 30 V dc supply voltage BES M08MI-PSC15B-S49G
BES 3-Wire M8 Inductive Proximity Sensors. This range of M8 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide variety of metal detection applications with in industrial environments. Features and benefits. Pre cabled or connector. Flush shielded or non-flush unshielded. 3 wire DC configuration
1 products found
JPY: 12,100
USD: 75.85
-
BALLUFF M12 5-Pin Female Cable & Connector for use with Photoelectric Sensor BCC M425-0000-1A-003-VX8434-050
Connection Leads. Connection leads for use with Balluff proximity sensors.
1 products found
JPY: 3,740
USD: 23.44
-
BALLUFF Inductive Sensor 8 mm Detection, M18 x 1, PNP-NO, 56mm Length, 12 → 30 V dc supply voltage BES M18MI-PSC80B-BV03
BES 3 / 4Wire M18 Inductive Proximity Sensor. This range of M18 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide vareity of metal detection applications with in industrial environments. Pre cabled or connector Flush shielded or non-flush unshielded 3 wire DC configuration
1 products found
JPY: 14,800
USD: 92.77
-
BALLUFF Inductive Sensor 1.5 mm Detection, M5 x 0.5, PNP-NO, 41mm Length, 10 → 30 V dc supply voltage BES 516-3005-G-E5-C-S49
BES 3-Wire M8 Inductive Proximity Sensors. This range of M8 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide variety of metal detection applications with in industrial environments. Features and benefits. Pre cabled or connector. Flush shielded or non-flush unshielded. 3 wire DC configuration
1 products found
JPY: 28,800
USD: 180.53
