[Reliance Water Controls]Plumbing & Pipeline
Filters
-
Reliance 3bar Pressure Relief Valve With Female BSP 1/2 in BSP Female Connection and a BSP 1/2 Exhaust Port PREL 101 003
BS6283 Part 1. WRC, Certificate No. 9409039. 3 ; 6 Bar Diaphragm Safety Valves. Body material - DZR Brass For heating systems and pressurised water systems Cartridge design for ease of service and replacement High lift design for increased discharge capacity
1 products found
JPY: 6,310
USD: 39.26
-
Reliance 3bar Pressure Relief Valve With Female BSP 3/4 in BSP Female Connection and a BSP 3/4 Exhaust Port PREL101913
BS6283 Part 1. WRC, Certificate No. 9409039. 3 ; 6 Bar Diaphragm Safety Valves. Body material - DZR Brass For heating systems and pressurised water systems Cartridge design for ease of service and replacement High lift design for increased discharge capacity
1 products found
JPY: 8,040
USD: 50.03
-
Reliance 22mm High Pressure Ball Valve Brass Isolating Valve BVAL201003
Isolating Ball Valve. Compact, high quality valve gives durability and secure isolation when activated Screwdriver actuated Nickel plated or Brass finish Manufactured from OT58 brass OT58 brass -chromium plated ball Chrome plated brass ball, encapsulated between two high grade NBR seals, gives smooth operation and 100% reliability BS 864 compression connections for ease of assembly Working Temperature: 85ﾟC Max.
1 products found
JPY: 4,250
USD: 26.44
-
Reliance 16bar Anti-Vacuum Valve with Male BSP 1/2 in BSP Male Connection ADMT503001
WRAS. Automatic Anti-Vacuum Valve. Automatic Anti-Vacuum Valve for use with hot water heaters to prevent a vacuum forming in installations where there is the potential of the draw off rate exceeding the rate of flow to the inlet; this can occur in properties with multiple outlets below the base of the hot water heater. The valve contains a check cartridge which under normal conditions is held closed by the system pressure. When a vacuum condition exists, the suction will cause the check cartridge to open and air to flow through, equalising the pressure within the hot water heater. Automatic protection against a vacuum forming in hot water installation Solid brass body for long life Easy access to the internals from the top of the valve Quick and simple service
1 products found
JPY: 11,800
USD: 73.42
-
Reliance Automatic Air Vent AVEN100001 3/8 in BSP AVEN100001
Automatic Air Vent. High quality automatic air vents for use in heating systems to vent air when commissioning a system. The device consists of a polypropylene float connected to a simple valve. When the build-up of air within the float chamber exceeds a certain level the float drops, opening the valve and releasing the air trapped within the chamber. As the air is released, water replaces it, and moves the float back into the up position, which closes the valve. Max. working pressure: 10 bar Max. working temperature: 110ﾟC Body: Standard brass Cap: Standard brass Float: Heat resistant polypropylene
1 products found
JPY: 3,420
USD: 21.28
-
Reliance 10bar Diffential Bypass Valve with Female 22 mm Metric Connection and a 22mm Exhaust Port DIFF200005
Differential By-Pass Valve. The differential bypass valve is used to stabilise the circulation, flow rate and pump pressures in central heating systems. Designed for a quick and simple installation where the valve is set using a visual dial based on your system calculations for the differential pressure. The valve is set by rotating the adjustment dial (with all radiators closed) to the desired differential opening pressure. The valve allows the optimum flow rate through the boiler to be maintained by automatically opening and allowing circulation to continue even if all the thermostatic radiator valves are closed. Maximum operating pressure: 10 bar Differential opening pressure range: 0-0.5bar Operating temperature: 110ﾟC Connection Size: 22mm Valve Body: Standard Brass Spring: Stainless Steel O-Ring: EPDM Piston: POM
1 products found
JPY: 11,100
USD: 69.06
-
Reliance Automatic Air Vent AVEN100005 1/2 in BSP AVEN100005
Automatic Air Vent. High quality automatic air vents for use in heating systems to vent air when commissioning a system. The device consists of a polypropylene float connected to a simple valve. When the build-up of air within the float chamber exceeds a certain level the float drops, opening the valve and releasing the air trapped within the chamber. As the air is released, water replaces it, and moves the float back into the up position, which closes the valve. Max. working pressure: 10 bar Max. working temperature: 110ﾟC Body: Standard brass Cap: Standard brass Float: Heat resistant polypropylene
1 products found
JPY: 3,460
USD: 21.53
-
Reliance 10bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection PTEM550753
WRAS. ( ; 7948432 7948432 no PTFE), ( ; 7948439 7948439 , ; 7948448 7948448 and ; 7948457 7948457 with probe). Full Cartridge Pressure and Temperature Relief Valve. All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system. Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again. The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used. Protect against temperature rising above 95ﾟC Prevent over pressurisation Twist toop cartridge design for easy servicing Range of different pressure settings and different probe lenghts
1 products found
JPY: 22,800
USD: 141.86
-
Reliance Zone Valve Brass 2 Way 220 → 240 V, 22mm Pipe Size, ZONE250905 ZONE250905
22mm Motorised 2 Port Zone Valve. A 240V two port zone valve for use in heating systems to isolate zones or equipment. Powered open with spring return. Easy to use, clip-on detachable head Pre-moulded plug and play cable supplied to connect to motorised head Metal manual operating lever for strenght and stability Motorised head can be retrofitted to other manufacturers valve bodies Systems fuse rating: 3A maximum Auxiliary switch rating: 3A 250VAC Water temperature range: 5ﾟC to 88ﾟC Max. Differential pressure: 0.69 bar Cable length: 1m
1 products found
JPY: 19,800
USD: 123.20
-
Reliance 4.5bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection PTEM550756
WRAS. ( ; 7948432 7948432 no PTFE), ( ; 7948439 7948439 , ; 7948448 7948448 and ; 7948457 7948457 with probe). Full Cartridge Pressure and Temperature Relief Valve. All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system. Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again. The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used. Protect against temperature rising above 95ﾟC Prevent over pressurisation Twist toop cartridge design for easy servicing Range of different pressure settings and different probe lenghts
1 products found
JPY: 22,800
USD: 141.86
-
Reliance 15mm High Pressure Ball Valve Nickel Plated Brass Isolating Valve BVAL201002
Isolating Ball Valve. Compact, high quality valve gives durability and secure isolation when activated Screwdriver actuated Nickel plated or Brass finish Manufactured from OT58 brass OT58 brass -chromium plated ball Chrome plated brass ball, encapsulated between two high grade NBR seals, gives smooth operation and 100% reliability BS 864 compression connections for ease of assembly Working Temperature: 85ﾟC Max.
1 products found
JPY: 2,580
USD: 16.05
-
Reliance Water Controls Stainless Steel Stopcock, 1/2in XVES050900
WRAS Approved. Potable Water Shock Arrestor. Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed. The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better. Maximum temperature: 99ﾟC Minimum temperature: -10ﾟC Pre-set Pressure: 5 bar Maximum working pressure: 15 bar Stainless Steel Flange Dimensions: 105 (H) x 65 diameter
1 products found
JPY: 19,600
USD: 121.95
-
Reliance 7bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection PTEM550752
WRAS. ( ; 7948432 7948432 no PTFE), ( ; 7948439 7948439 , ; 7948448 7948448 and ; 7948457 7948457 with probe). Full Cartridge Pressure and Temperature Relief Valve. All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system. Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again. The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used. Protect against temperature rising above 95ﾟC Prevent over pressurisation Twist toop cartridge design for easy servicing Range of different pressure settings and different probe lenghts
1 products found
JPY: 22,200
USD: 138.13
-
Reliance 7bar Temperature and Pressure Relief Valve with Male 15 mm Compression Connection PTEM550759
WRAS. ( ; 7948432 7948432 no PTFE), ( ; 7948439 7948439 , ; 7948448 7948448 and ; 7948457 7948457 with probe). Full Cartridge Pressure and Temperature Relief Valve. All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system. Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again. The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used. Protect against temperature rising above 95ﾟC Prevent over pressurisation Twist toop cartridge design for easy servicing Range of different pressure settings and different probe lenghts
1 products found
JPY: 31,400
USD: 195.37
-
Reliance 7bar Temperature and Pressure Relief Valve with Male BSP 1/2 in BSP Male Connection PTEM550951
WRAS. ( ; 7948432 7948432 no PTFE), ( ; 7948439 7948439 , ; 7948448 7948448 and ; 7948457 7948457 with probe). Full Cartridge Pressure and Temperature Relief Valve. All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system. Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again. The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used. Protect against temperature rising above 95ﾟC Prevent over pressurisation Twist toop cartridge design for easy servicing Range of different pressure settings and different probe lenghts
1 products found
JPY: 33,700
USD: 209.68
-
Reliance Cast Gun Metal Heatguard TMV3, 15mm BSP HEAT160915
WRAS TMV3. *Supply conditions must remain within limits stated. Heatguard® TMV3-8. A highly advanced TMV3 approved thermostatic mixing valve for use in basin, shower, bidet and high pressure bathfill applications (above 1 bar). The valve is designed to control the mixed water outlet temperature to within +/- 2ﾟC regardless of fluctuations in the temperature and pressure of the hot and cold water supplies, and to shut the mixed water outlet instantly in case of hot or cold water failure*. Fully approved by the WRAS under the TMV3 scheme to the DO8 specification for basin, shower, bidet, and high pressure bathfill applications Rapid thermostatic failsafe on either cold or hot supply failure protects the user from extreme temperature dangers Unique, purpose built temperature adjuster tool prevents unauthorised tampering Provides extreme mixed water temperature stability under changing supply conditions
1 products found
JPY: 56,800
USD: 353.41
-
Reliance Cast Gun Metal Heatguard TMV3, 22mm BSP HEAT160920
WRAS TMV3. *Supply conditions must remain within limits stated. Heatguard® TMV3-8. A highly advanced TMV3 approved thermostatic mixing valve for use in basin, shower, bidet and high pressure bathfill applications (above 1 bar). The valve is designed to control the mixed water outlet temperature to within +/- 2ﾟC regardless of fluctuations in the temperature and pressure of the hot and cold water supplies, and to shut the mixed water outlet instantly in case of hot or cold water failure*. Fully approved by the WRAS under the TMV3 scheme to the DO8 specification for basin, shower, bidet, and high pressure bathfill applications Rapid thermostatic failsafe on either cold or hot supply failure protects the user from extreme temperature dangers Unique, purpose built temperature adjuster tool prevents unauthorised tampering Provides extreme mixed water temperature stability under changing supply conditions
1 products found
JPY: 55,200
USD: 343.45
-
Reliance Cast Gun Metal Heatguard TMV3, 15mm BSP HEAT160930
WRAS TMV3. *Supply conditions must remain within limits stated. Heatguard® TMV3-8. A highly advanced TMV3 approved thermostatic mixing valve for use in basin, shower, bidet and high pressure bathfill applications (above 1 bar). The valve is designed to control the mixed water outlet temperature to within +/- 2ﾟC regardless of fluctuations in the temperature and pressure of the hot and cold water supplies, and to shut the mixed water outlet instantly in case of hot or cold water failure*. Fully approved by the WRAS under the TMV3 scheme to the DO8 specification for basin, shower, bidet, and high pressure bathfill applications Rapid thermostatic failsafe on either cold or hot supply failure protects the user from extreme temperature dangers Unique, purpose built temperature adjuster tool prevents unauthorised tampering Provides extreme mixed water temperature stability under changing supply conditions
1 products found
JPY: 67,200
USD: 418.12
-
Reliance Cast Gun Metal Heatguard TMV3, 22mm BSP HEAT160935
WRAS TMV3. *Supply conditions must remain within limits stated. Heatguard® TMV3-8. A highly advanced TMV3 approved thermostatic mixing valve for use in basin, shower, bidet and high pressure bathfill applications (above 1 bar). The valve is designed to control the mixed water outlet temperature to within +/- 2ﾟC regardless of fluctuations in the temperature and pressure of the hot and cold water supplies, and to shut the mixed water outlet instantly in case of hot or cold water failure*. Fully approved by the WRAS under the TMV3 scheme to the DO8 specification for basin, shower, bidet, and high pressure bathfill applications Rapid thermostatic failsafe on either cold or hot supply failure protects the user from extreme temperature dangers Unique, purpose built temperature adjuster tool prevents unauthorised tampering Provides extreme mixed water temperature stability under changing supply conditions
1 products found
JPY: 69,300
USD: 431.19
-
［Discontinued］Reliance Lever Tap, Bib Tap, 1/2 in BSP PUSH100930
15mm compression connections for inlet and outlet. Self Closing Lever Operated Flow Control. For disabled washing facilities and suitable for applications where hygiene is vital such as hospital wards, operating theatres and food preparation areas Can be installed for operation by knee, thigh or elbow depending on the installation conditions and user requirements Operated simply by a movement in any direction, the lever flow control provides hands free operation and self-closing feature 8-12 sec flow time, dependent on water pressure Plastic lever Self-closing plastic cartridge, non-concussive, piston-operated
1 products found
JPY: 17,300
USD: 107.64
-
［Discontinued］Reliance Brass Double Non Return Valve Floguard 15 mm BSP Female FLOW230001
WRAS. Floguard® Double Check Valves. The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999. Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel plated. Compact lightweight construction for easy installation Allows high flow rate with minimum pressure drop, giving good flow rates Ideal for all Class 3 contamination risks as per Water Supply (water fittings) Regulations 1999 Integral test point for monitoring correct functioning of the downstream check valve
1 products found
JPY: 1,290
USD: 8.03
-
［Discontinued］Reliance Brass Single Non Return Valve Floguard 1/2 in BSP Female FLOW235004
WRAS. Floguard® Single Check Valves. Single check valve protects against the risk of back flow and back syphonage contaminations Compact lightweight construction for easy installation Minimum pressure drop giving good flow rates Ideal for all Class 2 contamination risks as per Water Supply (water fittings) Regulations 1999 Available with a comprehensive selection of FBSP and compression connections Body: DZR Brass Seals: NBR Elastomor Check Cartridges: Acetyl Copolymer Spring: Stainless Steel
1 products found
JPY: 1,580
USD: 9.83
-
［Discontinued］Reliance Brass Single Non Return Valve Floguard 3/4 in BSP Female FLOW235005
WRAS. Floguard® Single Check Valves. Single check valve protects against the risk of back flow and back syphonage contaminations Compact lightweight construction for easy installation Minimum pressure drop giving good flow rates Ideal for all Class 2 contamination risks as per Water Supply (water fittings) Regulations 1999 Available with a comprehensive selection of FBSP and compression connections Body: DZR Brass Seals: NBR Elastomor Check Cartridges: Acetyl Copolymer Spring: Stainless Steel
1 products found
JPY: 1,960
USD: 12.20
-
［Out of stock］Reliance Brass Ausimix Thermostatic Mixing Valve, 15mm HEAT110750
BSEN 1111, BS 7942, NHS MES D08. WRAS, TMV2 and TMV3. Reliance Water Control ‘s Ausimix is a thermostatic mixing valve approved for both the TMV2 and TMV3 schemes making this valve suitable for healthcare, domestic and commercial/general public use. Ausimix TMV2 ; TMV3 Thermostatic Mixing Valves. Dual approval TMV2 and TMV3 for complete flexibility Rapid failsafe on eiter hot or cold supply failure Provides stable mixed water temperature Complies with Part G and NHS MES D08 specification Flat faced union connections for ease of maintenance Unique temperature adjustment tool incorporated into the cap Body and fittings: DZR Brass, Nickel plated Seals: Viton Spring: Stainless steel Strainers: Stainless steel Washers: Tesnit
1 products found
JPY: 22,800
USD: 141.86
-
［Out of stock］Reliance Brass Ausimix Thermostatic Mixing Valve, 22mm HEAT110785
BSEN 1111, BS 7942, NHS MES D08. WRAS, TMV2 and TMV3. Reliance Water Control ‘s Ausimix is a thermostatic mixing valve approved for both the TMV2 and TMV3 schemes making this valve suitable for healthcare, domestic and commercial/general public use. Ausimix TMV2 ; TMV3 Thermostatic Mixing Valves. Dual approval TMV2 and TMV3 for complete flexibility Rapid failsafe on eiter hot or cold supply failure Provides stable mixed water temperature Complies with Part G and NHS MES D08 specification Flat faced union connections for ease of maintenance Unique temperature adjustment tool incorporated into the cap Body and fittings: DZR Brass, Nickel plated Seals: Viton Spring: Stainless steel Strainers: Stainless steel Washers: Tesnit
1 products found
JPY: 41,700
USD: 259.46
-
［Discontinued］Reliance Nickel Plated Brass Double Non Return Valve Floguard 15 mm BSP Female FLOW230002
WRAS. Floguard® Double Check Valves. The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999. Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel plated. Compact lightweight construction for easy installation Allows high flow rate with minimum pressure drop, giving good flow rates Ideal for all Class 3 contamination risks as per Water Supply (water fittings) Regulations 1999 Integral test point for monitoring correct functioning of the downstream check valve
1 products found
JPY: 1,280
USD: 7.96
-
［Discontinued］Reliance Brass Double Filling Loop 1/8 in BSP FIBV246908
WRAS. Filmaster Filling Loop. The Filmaster® filling loop designed to allow sealed heating systems to be charged via a temporary mains supply connection. 1/8in. BSP test port on isolating double check valve 15mm compression connections Protects against Class 3 contamination risks Ball valve with lever for easy operation Supplied with metal watertight blanking cap for additional security Thumb grip nuts on hose to allow quick connection/disconnection to mains supply
1 products found
JPY: 1,980
USD: 12.32
-
［Discontinued］Reliance Brass Double Non Return Valve Floguard 1/2 in BSP Female FLOW230005
WRAS. Floguard® Double Check Valves. The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999. Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel plated. Compact lightweight construction for easy installation Allows high flow rate with minimum pressure drop, giving good flow rates Ideal for all Class 3 contamination risks as per Water Supply (water fittings) Regulations 1999 Integral test point for monitoring correct functioning of the downstream check valve
1 products found
JPY: 1,640
USD: 10.20
-
［Discontinued］Reliance Brass Double Non Return Valve Floguard 3/4 in BSP Female FLOW230006
WRAS. Floguard® Double Check Valves. The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999. Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel plated. Compact lightweight construction for easy installation Allows high flow rate with minimum pressure drop, giving good flow rates Ideal for all Class 3 contamination risks as per Water Supply (water fittings) Regulations 1999 Integral test point for monitoring correct functioning of the downstream check valve
1 products found
JPY: 3,370
USD: 20.97
-
［Discontinued］Reliance Brass Double Non Return Valve Floguard 28 mm BSP Female FLOW230004
WRAS. Floguard® Double Check Valves. The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999. Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel plated. Compact lightweight construction for easy installation Allows high flow rate with minimum pressure drop, giving good flow rates Ideal for all Class 3 contamination risks as per Water Supply (water fittings) Regulations 1999 Integral test point for monitoring correct functioning of the downstream check valve
1 products found
JPY: 4,250
USD: 26.44
-
［Discontinued］Reliance Brass Double Non Return Valve Floguard 1-1/2 in BSP Female FLOW230009
WRAS. Floguard® Double Check Valves. The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999. Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel plated. Compact lightweight construction for easy installation Allows high flow rate with minimum pressure drop, giving good flow rates Ideal for all Class 3 contamination risks as per Water Supply (water fittings) Regulations 1999 Integral test point for monitoring correct functioning of the downstream check valve
1 products found
JPY: 12,820
USD: 79.77
-
［Discontinued］Reliance Brass Double Non Return Valve Floguard 2 in BSP Female FLOW230910
WRAS. Floguard® Double Check Valves. The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999. Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel plated. Compact lightweight construction for easy installation Allows high flow rate with minimum pressure drop, giving good flow rates Ideal for all Class 3 contamination risks as per Water Supply (water fittings) Regulations 1999 Integral test point for monitoring correct functioning of the downstream check valve
1 products found
JPY: 18,900
USD: 117.60
-
［Discontinued］Reliance Brass Single Non Return Valve Floguard 15 mm BSP Female FLOW235001
WRAS. Floguard® Single Check Valves. Single check valve protects against the risk of back flow and back syphonage contaminations Compact lightweight construction for easy installation Minimum pressure drop giving good flow rates Ideal for all Class 2 contamination risks as per Water Supply (water fittings) Regulations 1999 Available with a comprehensive selection of FBSP and compression connections Body: DZR Brass Seals: NBR Elastomor Check Cartridges: Acetyl Copolymer Spring: Stainless Steel
1 products found
JPY: 970
USD: 6.04
-
［Discontinued］Reliance Brass Single Non Return Valve Floguard 22 mm BSP Female FLOW235002
WRAS. Floguard® Single Check Valves. Single check valve protects against the risk of back flow and back syphonage contaminations Compact lightweight construction for easy installation Minimum pressure drop giving good flow rates Ideal for all Class 2 contamination risks as per Water Supply (water fittings) Regulations 1999 Available with a comprehensive selection of FBSP and compression connections Body: DZR Brass Seals: NBR Elastomor Check Cartridges: Acetyl Copolymer Spring: Stainless Steel
1 products found
JPY: 1,750
USD: 10.89
-
［Discontinued］Reliance Brass Single Non Return Valve Floguard 1-1/2 in BSP Female FLOW235908
WRAS. Floguard® Single Check Valves. Single check valve protects against the risk of back flow and back syphonage contaminations Compact lightweight construction for easy installation Minimum pressure drop giving good flow rates Ideal for all Class 2 contamination risks as per Water Supply (water fittings) Regulations 1999 Available with a comprehensive selection of FBSP and compression connections Body: DZR Brass Seals: NBR Elastomor Check Cartridges: Acetyl Copolymer Spring: Stainless Steel
1 products found
JPY: 6,880
USD: 42.81
-
［Discontinued］Reliance Brass Single Non Return Valve Floguard 2 in BSP Female FLOW235909
WRAS. Floguard® Single Check Valves. Single check valve protects against the risk of back flow and back syphonage contaminations Compact lightweight construction for easy installation Minimum pressure drop giving good flow rates Ideal for all Class 2 contamination risks as per Water Supply (water fittings) Regulations 1999 Available with a comprehensive selection of FBSP and compression connections Body: DZR Brass Seals: NBR Elastomor Check Cartridges: Acetyl Copolymer Spring: Stainless Steel
1 products found
JPY: 8,930
USD: 55.56
-
［Out of stock］Reliance Brass Ausimix Thermostatic Mixing Valve, 15mm HEAT110980
BSEN 1111, BS 7942, NHS MES D08. WRAS, TMV2 and TMV3. Reliance Water Control ‘s Ausimix is a thermostatic mixing valve approved for both the TMV2 and TMV3 schemes making this valve suitable for healthcare, domestic and commercial/general public use. Ausimix TMV2 ; TMV3 Thermostatic Mixing Valves. Dual approval TMV2 and TMV3 for complete flexibility Rapid failsafe on eiter hot or cold supply failure Provides stable mixed water temperature Complies with Part G and NHS MES D08 specification Flat faced union connections for ease of maintenance Unique temperature adjustment tool incorporated into the cap Body and fittings: DZR Brass, Nickel plated Seals: Viton Spring: Stainless steel Strainers: Stainless steel Washers: Tesnit
1 products found
JPY: 35,100
USD: 218.39
