[Roth Elektronik]Electronic/Electrical Parts and Controll Equipments
Filters
- by Product group
- by Product
Sort by:
-
［Discontinued］RE225-HP, Single Sided DIN 41652 Eurocard PCB FR2 With 35 x 42 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE225-HP
D-Sub Connector Labcard. SRBP solder lacquered Epoxy fibre-glass FR4 1.5mm, hot air levelling (HAL-leadfree) 2 potential strips Stk nos. < 528-0419') 528-0419/ & < 359-4019') 359-4019/ 2x9-channel and 2x15-channel Stk nos. < 528-0425') 528-0425/ & < 359-4047') 359-4047/ 2x25-channel Connector type D-Sub DIN 41652 Single sided Board size 100 x 160 x 1.5mm Copper thickness 35μm hole pitch 2.54mm (0.1 in) Hole dia 1.0mm
1 products found
JPY: 720
USD: 4.48
-
［Discontinued］Surface Mount (SMT) Board SSOP Epoxy Glass Double-Sided 23.5 x 20 x 1.5mm FR4 RE931-03
RE931 Adapter Boards. RE931 adapter boards from Roth Elektronik are suitable for use with SSOP devices. Constructed with an epoxy glass fabric laminate (FR4), these adapter boards are double-sided copper with a thickness of 35 μm. Both sides are coated with chemical gold and solder mask. A range of different sizes are available.
1 products found
JPY: 1,340
USD: 8.34
-
［Discontinued］Surface Mount (SMT) Board SSOP Epoxy Glass Double-Sided 23.5 x 13.5 x 1.5mm FR4 RE931-01
RE931 Adapter Boards. RE931 adapter boards from Roth Elektronik are suitable for use with SSOP devices. Constructed with an epoxy glass fabric laminate (FR4), these adapter boards are double-sided copper with a thickness of 35 μm. Both sides are coated with chemical gold and solder mask. A range of different sizes are available.
1 products found
JPY: 820
USD: 5.10
-
［Discontinued］PCB Adapter SOJ Epoxy Glass Double-Sided 35.5 x 29 x 1.5mm FR4 RE932-10
SO & SOJ Adaptor Boards. Adaptor board suitable for 10 different SO Pad spacing: 1.27mm FR4 epoxy fibreglass laminate Material thickness: 1.50mm Double sided, 35μm copper Through-holes Ø 1.00mm Soldered and component sides coated with chemical gold and solder mask Prescored break lines allow separation of individual modules from the board
1 products found
JPY: 1,060
USD: 6.60
-
［Discontinued］Surface Mount (SMT) Board SOIC Epoxy Glass Double-Sided 25.5 x 24 x 1.5mm FR4 RE932-09
SO & SOJ Adaptor Boards. Adaptor board suitable for 10 different SO Pad spacing: 1.27mm FR4 epoxy fibreglass laminate Material thickness: 1.50mm Double sided, 35μm copper Through-holes Ø 1.00mm Soldered and component sides coated with chemical gold and solder mask Prescored break lines allow separation of individual modules from the board
1 products found
JPY: 1,150
USD: 7.16
-
［Discontinued］RE212-LF, Single Sided Eurocard PCB FR4 With 38 x 61 1mm Holes, 2.54 x 2.54mm Pitch, 160.15 x 100.2mm RE212-LF
Single-Sided Prototyping Boards. These prototyping boards from Roth Elektronik are available in a range of sizes with the following features:. One-sided Hot air levelling – HAL-lead-free With holes – spacing: 2.54 x 2.54 mm Hole diameter: 1.00 mm 35 μm CU Size: 100 x 160 mm. All soldering pads are connected by horizontal and vertical conductor paths. Manual interruption of the thin conductor paths enables the simple creation of the custom layouts
1 products found
JPY: 3,330
USD: 20.72
-
［Discontinued］RE512-LF, Single Sided Eurocard PCB FR4 With 36 x 62 1mm Holes, 2.54 x 2.54mm Pitch, 160.01 x 100mm RE512-LF
Single-Sided Prototyping Boards. These prototyping boards from Roth Elektronik are available in a range of sizes with the following features:. One-sided Hot air levelling – HAL-lead-free With holes – spacing: 2.54 x 2.54 mm Hole diameter: 1.00 mm 35 μm CU Size: 100 x 160 mm. All soldering pads are connected by horizontal and vertical conductor paths. Manual interruption of the thin conductor paths enables the simple creation of the custom layouts
1 products found
JPY: 1,470
USD: 9.15
-
［Discontinued］RE942-S1, Breadboard Solderable Breadboard With Adaption Circuit Board 31.75 x 24.76 x 1.5mm RE942-S1
RE942-S1 Solderable Bread Board 14-Pin-Socket. Adaption circuit board for 14-Pin-Sockets with a distance of 7.62 mm Epoxy fibre-glass FR4 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Hole spacing 2.54 mm 2 x 7 two-hole-pads on each side U-shape potential strip
1 products found
JPY: 410
USD: 2.55
-
［Discontinued］RE3001-LF, Double Sided Eurocard FR4 1.1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100.18 x 1.5mm RE3001-LF
Roth Elektronik - RE3001-LF Eurocard for Arduino Applications. The RE3001-LF Eurocard is a two-sided laboratory board for Arduino applications. The Eurocard has been designed in an epoxy glass hard fabric and is 100mm x 160mm in dimension. Expoxy glass hard fabric FR4 1.50mm Two-sided laboratory board for Arduino applications 100mm x 160mm dimension
1 products found
JPY: 2,650
USD: 16.49
-
［Discontinued］RE434-LF, Breadboard Breadboard 95 x 53.50 x 0.8mm RE434-LF
Roth Elektronik - RE434-LF SMD Breadboard. The RE434-LF is a two-sided SMD Breadboard used for a wide range of educational and hobbyist applications. The breadboard has been designed in an epoxy glass hard fabric and is 53mm x 95mm in dimension. Epoxy glass hard fabric FR4 1.50mm Two-sided 35um Cu Plated through holes SMD hole spacing 1.25mm x 1.25mm Size 53mm x 95mm
1 products found
JPY: 2,640
USD: 16.43
-
［Discontinued］RE610-LF, Double Sided Eurocard FR4 With 15 x 47, 37 x 94, 7 x 37 0.3 mm, 1.1 mm Holes, 1 x 1 mm, 2 x 2 mm, 2.54 x 2.54 RE610-LF
Roth Elektronik – Eurocard for Grids. Roth Elektronik offers an excellent range of epoxy glass hard fabric eurocards for a wide range of grid sizes. These two-sided 35um Cu eurocards are plated through and are 100mm x 160mm in dimension. Epoxy glass hard fabric FR4 1.50mm Two-sided 35um Cu Plated through holes Size 100mm x 160mm Pre-scored predetermined breaking point
1 products found
JPY: 3,270
USD: 20.35
-
［Discontinued］RE620-LF, Double Sided Eurocard FR4 With 25 x 75, 7 x 37 0.3 mm, 1.1 mm Holes, 1.25 x 1.25 mm, 1.27 x 1.27 mm, 2.54 x RE620-LF
Roth Elektronik – Eurocard for Grids. Roth Elektronik offers an excellent range of epoxy glass hard fabric eurocards for a wide range of grid sizes. These two-sided 35um Cu eurocards are plated through and are 100mm x 160mm in dimension. Epoxy glass hard fabric FR4 1.50mm Two-sided 35um Cu Plated through holes Size 100mm x 160mm Pre-scored predetermined breaking point
1 products found
JPY: 2,900
USD: 18.04
-
［Discontinued］RE630-LF, Double Sided Eurocard FR4 With 7 x 25, 7 x 37, 8 x 27 1.1mm Holes, 2.54 x 2.54 mm, 3.5 x 3.5 mm, 3.81 x 3.81 RE630-LF
Roth Elektronik – Eurocard for Grids. Roth Elektronik offers an excellent range of epoxy glass hard fabric eurocards for a wide range of grid sizes. These two-sided 35um Cu eurocards are plated through and are 100mm x 160mm in dimension. Epoxy glass hard fabric FR4 1.50mm Two-sided 35um Cu Plated through holes Size 100mm x 160mm Pre-scored predetermined breaking point
1 products found
JPY: 1,920
USD: 11.95
-
［Discontinued］RE640-LF, Double Sided Eurocard FR4 With 5 x 19, 7 x 37 1.1mm Holes, 2.54 x 2.54 mm, 5 x 5 mm, 5.08 x 5.08 mm Pitch, RE640-LF
Roth Elektronik – Eurocard for Grids. Roth Elektronik offers an excellent range of epoxy glass hard fabric eurocards for a wide range of grid sizes. These two-sided 35um Cu eurocards are plated through and are 100mm x 160mm in dimension. Epoxy glass hard fabric FR4 1.50mm Two-sided 35um Cu Plated through holes Size 100mm x 160mm Pre-scored predetermined breaking point
1 products found
JPY: 1,920
USD: 11.95
-
［Discontinued］RE650-LF, Double Sided Eurocard FR4 With 4 x 15, 7 x 37, 9 x 37 1.1mm Holes, 2.5 x 2.5 mm, 2.54 x 2.54 mm, 6.35 x 6.35 RE650-LF
Roth Elektronik – Eurocard for Grids. Roth Elektronik offers an excellent range of epoxy glass hard fabric eurocards for a wide range of grid sizes. These two-sided 35um Cu eurocards are plated through and are 100mm x 160mm in dimension. Epoxy glass hard fabric FR4 1.50mm Two-sided 35um Cu Plated through holes Size 100mm x 160mm Pre-scored predetermined breaking point
1 products found
JPY: 1,920
USD: 11.95
-
［Discontinued］RE660-LF, Double Sided Eurocard FR4 With 7 x 37 1.1mm Holes, 2.54 x 2.54 mm, 7.5 x 7.5 mm, 7.62 x 7.62 mm Pitch, 160 x RE660-LF
Roth Elektronik – Eurocard for Grids. Roth Elektronik offers an excellent range of epoxy glass hard fabric eurocards for a wide range of grid sizes. These two-sided 35um Cu eurocards are plated through and are 100mm x 160mm in dimension. Epoxy glass hard fabric FR4 1.50mm Two-sided 35um Cu Plated through holes Size 100mm x 160mm Pre-scored predetermined breaking point
1 products found
JPY: 1,920
USD: 11.95
-
［Discontinued］RE716001-LF, Double-Sided SMD Soldering Exercise Board FR4 for 11 Multiple Types Packages 213 x 72 x 1.5mm RE716001-LF
Roth Elektronik - Solder Practice Board. The RE716001-LF from Roth Elektronik is a two-sided 35um Cu Solder practice board which can be used for 11 different SMD components. This practice board has been designed in an epoxy glass hard fabric and is 72mm x 213mm in dimension. Epoxy glass hard fabric FR4 1.50mm Two-sided 35um Cu Solder practice board can be used for 11 different SMD components Size 72mm x 160mm
1 products found
JPY: 2,280
USD: 14.19
-
［Discontinued］RE921, Double Sided Bracket Adapter Adapter FR4 15.88 x 22.57 x 1.5mm RE921
Roth Elektronik - RE921 Adapter. The RE921 from Roth Elektronik iis an epoxy glass hard fabric adapter for MSOP16. This two-sided 35um Cu adapter is plated through and is 15.88mm x 22.57mm in dimension. Adapter for MSOP16 Epoxy glass hard fabric FR4 1.50mm Two sided 35um Cu Size 15.88mm x 22.57mm Perfect for educational and hobbyist applications
1 products found
JPY: 830
USD: 5.16
-
［Discontinued］RE523-HP, Single Sided 37-Way Edge Eurocard PCB FR2 With 37 x 57 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE523-HP
Stripboard RE52x. European size (160 ´ 100 mm) Printed circuit boards made from FR2 laminated paper (HP), coated with solder mask FR4 epoxy circuit boards (LF), lead-free, tin-plated Material thickness 1.5 mm 35 μm copper laminate Hole pattern 2.54 ´ 2.54 mm Continuous conductor tracks with hole Ø 1 mm Grid for various multiple contact strips depending on the design
1 products found
JPY: 700
USD: 4.36
-
［Discontinued］Surface Mount (SMT) Board TSSOP Epoxy Glass Double-Sided 120.03 x 58.81 x 1.5mm FR4 RE933
TSSOP Multi-Adaptor Boards, RE933. Material thickness: 1.50mm Double-sided, 35μm copper Through-holes Ø 1.00mm Soldered and component sides coated with chemical gold and solder mask Prescored break lines allow separation of individual modules from the board
1 products found
JPY: 5,100
USD: 31.73
-
［Discontinued］RE920C64/1-LF, 64 Way Single Sided DIN 41612 Extender Board Extender Board FR4 RE920C64/1-LF
DIN 41612 Extender Test Adaptor Boards. Removable jumpers and two measuring posts for each track Signalling line pin 2 - 31 Large signalling line pin 1 + 32 Extender card: 100% electronically tested Additional print at the component side Manufacturer Part Number indicates rows present
1 products found
JPY: 21,600
USD: 134.40
-
［Discontinued］SMD Soldering Exercise Board Multi-Adaptor Epoxy Glass Single-Sided 100 x 160 x 1.5mm FR4 RE450-LF
SMD Labcard Prototyping Card. FR4 board, hot air levelled, solder stop mask coated Connector type DIN 41612 Copper thickness 35μm Board size 100 x 160 x 1.6mm
1 products found
JPY: 3,980
USD: 24.76
-
［Discontinued］RE201-LFDS, Double Sided Matrix Board FR4 with 34 x 54 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE201-LFDS
Matrixboard with Ground Plane. Hot air levelled Through holes have etched-free ring on ground plane side to provide isolated ground plane on component side Plated through holes for both DIN connector and PCB matrix (RE334 only) Ground plane designed to reduce EMI problems in high frequency circuits Connector type DIN 41612 (C-96/abc) Epoxy Glass Double sided Board size 100 x 160 x 1.5mm Hole pitch 2.54mm (0.1 in) Hole dia 1.0mm Copper thickness 35μm
1 products found
JPY: 3,610
USD: 22.46
-
［Discontinued］RE960-C96/1LF, 96 Way Single Sided DIN 41612 Extender Board Extender Board FR4 RE960-C96/1LF
DIN 41612 Extender Test Adaptor Boards. Removable jumpers and two measuring posts for each track Signalling line pin 2 - 31 Large signalling line pin 1 + 32 Extender card: 100% electronically tested Additional print at the component side Manufacturer Part Number indicates rows present
1 products found
JPY: 23,900
USD: 148.71
-
［Discontinued］RE334-LF, Double Sided DIN 41612 C Eurocard PCB FR4 With 32 x 53 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE334-LF
Matrixboard with Ground Plane. Hot air levelled Through holes have etched-free ring on ground plane side to provide isolated ground plane on component side Plated through holes for both DIN connector and PCB matrix (RE334 only) Ground plane designed to reduce EMI problems in high frequency circuits Connector type DIN 41612 (C-96/abc) Epoxy Glass Double sided Board size 100 x 160 x 1.5mm Hole pitch 2.54mm (0.1 in) Hole dia 1.0mm Copper thickness 35μm
1 products found
JPY: 4,230
USD: 26.32
-
［Discontinued］RE521-LF, Single-Sided Stripboard Epoxy Glass 100 x 160 x 1.5mm DIN 41612 FR4 RE521-LF
DIN Type Stripboard. SRBP-paper FR2 1.5mm, solder-lacquered EPOXY fibre-glass FR4 1.5 mm, hot air levelled (HAL-leadfree) Board size 100 x 160 x 1.6mm Hole layout 37 x 57 Hole dia 1.0mm Pitch 2.54mm (0.1in) Copper thickness 35μm
1 products found
JPY: 1,090
USD: 6.78
-
［Discontinued］Surface Mount (SMT) Board Multi-Adaptor Epoxy Glass Double-Sided 160 x 100 x 0.7mm FR4 RE436-LF
SMD Standard Matrix Prototyping Card. Double-sided FR4 epoxy board Copper thickness 35μm Plated through holes Tin coated Hole pitch 1.27mm (< 523-0672') 523-0672/ has 1.27mm and 2.54mm pitch areas)
1 products found
JPY: 8,890
USD: 55.31
-
［Discontinued］RE333-LF, Double Sided DIN 41612 Multibus II Board with 79 x 80 1mm Holes, 2.54 x 2.54mm Pitch, 233.4 x 220 x 1.5mm RE333-LF
Prototype board for Multibus II. Epoxy FR4 (LF) PCB, lead-free, tin-plated 35-μm copper lamination Hole matrix 2.54 ´ 2.54 mm RE332-LF and RE333-LF double-sided, through hole plated Ø 2 mm soldering points; Ø 1 mm hole Grid for multiple contact strips DIN 41612 type C-96/abc
1 products found
JPY: 10,500
USD: 65.33
-
［Discontinued］RE322-LF, Double Sided DIN 41612 C Matrix Board FR4 with 55 x 88 1mm Holes, 2.54 x 2.54mm Pitch, 233.4 x 160 x 1.5mm RE322-LF
Matrixboards, DIN 41612//7 Type. Plated through holes (double sided 321//322 types) Nominal thickness 1.5mm Copper thickness 35μm Hole Pitch 2.54mm (0.1 in) Hole dia 1.0mm
1 products found
JPY: 5,950
USD: 37.02
-
［Discontinued］RE317-LF, Single Sided DIN 41612 D Matrix Board FR4 with 37 x 55 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE317-LF
Matrixboards, DIN 41612//7 Type. Plated through holes (double sided 321//322 types) Nominal thickness 1.5mm Copper thickness 35μm Hole Pitch 2.54mm (0.1 in) Hole dia 1.0mm
1 products found
JPY: 1,300
USD: 8.09
-
［Discontinued］RE332-LF, Double Sided DIN 41612 Multibus II Board with 32 x 81 1mm Holes, 2.54 x 2.54mm Pitch, 220 x 100 x 1.5mm RE332-LF
Prototype board for Multibus II. Epoxy FR4 (LF) PCB, lead-free, tin-plated 35-μm copper lamination Hole matrix 2.54 ´ 2.54 mm RE332-LF and RE333-LF double-sided, through hole plated Ø 2 mm soldering points; Ø 1 mm hole Grid for multiple contact strips DIN 41612 type C-96/abc
1 products found
JPY: 3,730
USD: 23.21
-
［Discontinued］RE440-LF, Double Sided DIN 41652 C Eurocard PCB FR4 0.8mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE440-LF
Matrixboards, DIN 41612//7 Type. Plated through holes (double sided 321//322 types) Nominal thickness 1.5mm Copper thickness 35μm Hole Pitch 2.54mm (0.1 in) Hole dia 1.0mm
1 products found
JPY: 3,520
USD: 21.90
-
［Discontinued］RE525-LF, Single Sided DIN 41612 D Matrix Board FR4 with 37 x 57 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE525-LF
Matrixboards, DIN 41612//7 Type. Plated through holes (double sided 321//322 types) Nominal thickness 1.5mm Copper thickness 35μm Hole Pitch 2.54mm (0.1 in) Hole dia 1.0mm
1 products found
JPY: 1,540
USD: 9.58
-
［Discontinued］RE711001-LF, Single-Sided SMD Soldering Exercise Board FR4 for 57 Multiple Types Packages 100 x 140 x 1.5mm RE711001-LF
SMD soldering practice circuit boards, RE711001. Guide board for SMD base mount, also suitable for machine assembly (pick and place) FR4 1.5 mm thick, 1-sided 35 μm Cu. Solder-side hot-dip tin-plated and HAL, solder mask and component overlay.
1 products found
JPY: 2,760
USD: 17.17
-
［Discontinued］RE224-LF, Single Sided DIN 41652 Eurocard FR4 with 48 x 35 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE224-LF
D-Sub Connector Labcard. SRBP solder lacquered Epoxy fibre-glass FR4 1.5mm, hot air levelling (HAL-leadfree) 2 potential strips Stk nos. < 528-0419') 528-0419/ & < 359-4019') 359-4019/ 2x9-channel and 2x15-channel Stk nos. < 528-0425') 528-0425/ & < 359-4047') 359-4047/ 2x25-channel Connector type D-Sub DIN 41652 Single sided Board size 100 x 160 x 1.5mm Copper thickness 35μm hole pitch 2.54mm (0.1 in) Hole dia 1.0mm
1 products found
JPY: 1,150
USD: 7.16
-
［Discontinued］RE225-LF, Single Sided DIN 41652 Eurocard PCB FR4 With 35 x 42 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm RE225-LF
D-Sub Connector Labcard. SRBP solder lacquered Epoxy fibre-glass FR4 1.5mm, hot air levelling (HAL-leadfree) 2 potential strips Stk nos. < 528-0419') 528-0419/ & < 359-4019') 359-4019/ 2x9-channel and 2x15-channel Stk nos. < 528-0425') 528-0425/ & < 359-4047') 359-4047/ 2x25-channel Connector type D-Sub DIN 41652 Single sided Board size 100 x 160 x 1.5mm Copper thickness 35μm hole pitch 2.54mm (0.1 in) Hole dia 1.0mm
1 products found
JPY: 1,270
USD: 7.90
-
［Discontinued］RE233-LF, Double Sided Matrix Board FR4 with 40 x 60 1.02mm Holes, 2.54 x 2.54mm Pitch, 165.1 x 114.3 x 1.6mm RE233-LF
RE233-LF Laboratory Card. Non-European Format Size: 114.3 x 165.1 mm (4.5" x 6.5") Material thickness: 1.6 mm FR4 epoxy optical fibre Copper coating 35 μm on both sides, with through hole Hole pattern: 2.54 x 2.54 mm (1//20") 40 x 60 bore hole rows 40 x 56 2 mm quadratic soldering islands Hole diameter: 1.02 mm (0.4") Max. Operating temperature: 150 °C (302 °F)
1 products found
JPY: 6,410
USD: 39.88
-
［Discontinued］RE232-LF, Single Sided Matrix Board FR4 with 40 x 60 1.02mm Holes, 2.54 x 2.54mm Pitch, 165.1 x 114.3 x 1.6mm RE232-LF
RE232-LF Laboratory Card for DIL ICs. Non-European Format Size: 114.3 x 165.1 mm Material thickness: 1.6 mm FR4 Copper coating 35 μm, hot dip tin-plated on soldering side only (HAL) Component overlay on component side Hole pattern: 2.54 x 2.54 mm (1//20") 40 x 60 bore hole rows 3-hole soldering islands 4 DIP IC rows, 7.62 mm sequence, 15.24 mm with 48 connections Hole diameter: 1.02 mm Max. Operating temperature: 150 °C
1 products found
JPY: 3,850
USD: 23.96
-
［Discontinued］RE231-LF, Double Sided Matrix Board FR4 With 40 x 60 1.02mm Holes, 2.54 x 2.54mm Pitch, 165.1 x 114.3 x 1.6mm RE231-LF
RE231-LF Laboratory Card. Non-European Format Hot dip tin-plated on solder and component side (HAL) Fully lined on component side 40 x 60 bore hole rows 40 x 58 2 mm quadratic soldering islands Max. Components shielded with ground potential properties of lining Suitable for HF, digital and analogue switches
1 products found
JPY: 4,220
USD: 26.26
-
［Discontinued］RE230-LF, Single Sided Matrix Board FR4 with 40 x 60 1.02mm Holes, 2.54 x 2.54mm Pitch, 165.1 x 114.3 x 1.6mm RE230-LF
RE230-LF Laboratory Card. Non-European Format Size: 114.3 x 165.1 mm Material thickness: 1.6 mm FR4 Copper lamination 35 μm, hot dip tin-plated on one side (HAL) and coated with a solder mask Hole pattern: 2.54 x 2.54 mm 40 x 60 bore hole rows 40 x 58 2 mm quadratic soldering islands Hole diameter: 1.02 mm Max. Operating temperature: 150 °C
1 products found
JPY: 3,580
USD: 22.28
