Baumer

Baumer 5 Digit, LED, Digital Counter, 10kHz, 12 → 30 V dc　NE216.013AX01

LED Dual Preset. Up/down counters with NPN/PNP or AC logic inputs Resettable Front fascia sealed to IP54 Greater than 10 year data retention

Baumer

Mechanical Counter Baumer M 310.R10A06C, Revolution 5 digits Top Going　M 310.R10A06C

Metric Counter with 5 cm Measuring Wheel- Top Going. Counts upwards Metric counter with a 5 cm measuring wheel (synthetic scored housing) Fast zero reset via an interchangeable handle (left or right)

Baumer

Mechanical Counter Baumer M 410.01RA03G, Revolution 5 digits Top Going　M 410.01RA03G

50cm Metric Counter - Top Going. Counts upwards Metric counter with a 50 cm measuring wheel (synthetic scoring housing) Fast zero reset via an interchangeable handle (left or right)

Baumer

Mechanical Counter Baumer T 134.R10B 4 digits　T 134.R10B

Counter T134 Series. For counting, plotting, checking, numbering people, cars, items, etc. in production Reset by knurled knob. Supplied with a ring for manual use. Supplied with clip-on base on the enclosure, for fitting the counter to a horizontal or vertical support bracket.

Baumer

Baumer 4 Digit, LED, Digital Counter, 7kHz, 10.5 → 70 V dc, 21 → 53 V ac　TA1200.005AX01

EN50082-2 and EN55011. Instructions NOT supplied in English. Compact tachometers TA 1220 - 10 mm display. LED tachometers, 4 x 10-mm high red LED digits. Displays speeds, rates and frequencies. Measures feedthrough time. NPN, PNP, NAMUR, TTL or sinusoidal pulsed input signal from 100 → 600 Vac. Displayed in seconds, minutes or hours. Measurement principle based on measuring the period of the input signal. Mounting bracket supplied.

Baumer

Baumer 6 Digit, LED, Digital Counter, 7kHz, 100 → 300 V dc, 85 → 265 V ac　TA1200.004AX01

EN50082-2 and EN55011. Instructions NOT supplied in English. Compact tachometers TA 1220 - 10 mm display. LED tachometers, 4 x 10-mm high red LED digits. Displays speeds, rates and frequencies. Measures feedthrough time. NPN, PNP, NAMUR, TTL or sinusoidal pulsed input signal from 100 → 600 Vac. Displayed in seconds, minutes or hours. Measurement principle based on measuring the period of the input signal. Mounting bracket supplied.

Baumer

Baumer 5 Digit, LED, Digital Counter, 10kHz, 30 V dc　NE216.023AX01

Baumer

Baumer 5 Digit, LED, Digital Counter, 15kHz, 53 V ac, 70 V dc　NE1218.015AX01

Baumer

［Discontinued］Baumer 5 Digit, LED, Digital Counter, 10kHz, 115 → 230 V ac　NE210.012AXA1

5 Digit Single Preset. 5-digit LED display Operating mode, start count, scaling factor programmable SPCO relay output Time meter with four time ranges Time relay with operation and release delay Pogrammable as a time counter Plug-in screw terminal connection

Baumer

［Discontinued］Baumer 5 Digit, LED, Digital Counter, 10kHz, 24 V dc　NE210.013AXA1

5 Digit Single Preset. 5-digit LED display Operating mode, start count, scaling factor programmable SPCO relay output Time meter with four time ranges Time relay with operation and release delay Pogrammable as a time counter Plug-in screw terminal connection

Baumer

［Discontinued］Baumer 8 Digit, LED, Digital Counter, 10kHz, 85 → 265 V ac　NE212.012AXA2

6-digit LED display preset counters - NE 212. Very easy to use single counters thanks to the decimal keyboard and the set of LED indicators. Main counter with 1 or 2 presets over 6 digits with sign. General total over 8 digits. Integrated auxiliary cycle counter (or tachymeter) and time counter. Impulse scaling factor. "Floating preliminary" and "permanent comparison of 2 preset" functions. Many programmable counter modes: adding, subtracting, bi-directional, sum or difference, etc.

Baumer

［Discontinued］Baumer 6 Digit, LED, Digital Counter, 40kHz, 115 V ac, 230 V ac　TA200.002AXA1

8 Digit LED Display. Designed for sequential measurements Pulse variation can be programmed from 0.0001 to 9999.99 Sensor logic can be programmed Frequencies processed up to 40 kHz Measurement according to measurement of length of period Resettable LED display

Baumer

［Discontinued］Baumer 6 Digit, LED, Digital Counter, 40kHz, 24 V dc　TA200.003AXA1

8 Digit LED Display. Designed for sequential measurements Pulse variation can be programmed from 0.0001 to 9999.99 Sensor logic can be programmed Frequencies processed up to 40 kHz Measurement according to measurement of length of period Resettable LED display

Baumer

［Discontinued］Baumer 6 Digit, LED, Digital Counter, 40kHz, 115 V ac, 230 V ac　TA202.022AXA1

8 Digit LED Display. Designed for sequential measurements Pulse variation can be programmed from 0.0001 to 9999.99 Sensor logic can be programmed Frequencies processed up to 40 kHz Measurement according to measurement of length of period Resettable LED display

Baumer

［Discontinued］Baumer 5 Digit, Mechanical, Digital Counter, 60Hz, 24 V dc　FS314.550AA3B

Count Down. Counts down pulses from a pre-set value and triggers a changeover contact on reaching zero Contacts return to original position when counter is reset to zero Electrical connection via supplied plug in clips Offers IP40 protection with cover (sold seperately) SPDT contact rated to 230Vac 2A

Baumer

［Discontinued］Baumer 5 Digit, LED, Digital Counter, 10kHz, 85 → 265 V ac　NE216.012AX01

LED Dual Preset. Up/down counters with NPN/PNP or AC logic inputs Resettable Front fascia sealed to IP54 Greater than 10 year data retention

Baumer

［Discontinued］Baumer 6 Digit, Mechanical, Counter, 60Hz, 24 V dc　FE514.650AB3C

Predetermining Batch. Isolated SPDT microswitch changes over when the counter reaches the preselected count value, 230Vac 2A (contact load) Contacts return to original position when counter is reset to zero

Baumer

［Discontinued］Baumer 6 Digit, Mechanical, Counter, 60Hz, 230 V ac　FE514.650AB9C

Predetermining Batch. Isolated SPDT microswitch changes over when the counter reaches the preselected count value, 230Vac 2A (contact load) Contacts return to original position when counter is reset to zero

Baumer

［Discontinued］Baumer 6 Digit, Mechanical, Counter, 60Hz, 110 V ac　FE514.650AB8C

Predetermining Batch. Isolated SPDT microswitch changes over when the counter reaches the preselected count value, 230Vac 2A (contact load) Contacts return to original position when counter is reset to zero

Baumer

［Discontinued］Baumer 6 Digit, Digital Counter, 20Hz, 24 V dc　F574.65/24VDC

F 574 Series 6-digit electro-mechanical totalising counters. 6-digit electro-mechanical totalising counters. Counting speed for pulse / pause ratio : 1: - 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited - 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited. Supplied with plug-in solder clips. Screw mounting on front face.

Baumer

［Discontinued］Baumer 6 Digit, Counter, 10Hz, 230 V ac　F574.65/220VAC

F 574 Series 6-digit electro-mechanical totalising counters. 6-digit electro-mechanical totalising counters. Counting speed for pulse / pause ratio : 1: - 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited - 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited. Supplied with plug-in solder clips. Screw mounting on front face.

Baumer

［Discontinued］Baumer 8 Digit, LED, Digital Counter, 10kHz, 24 V dc　NE212.013AXA2

Preset Counters. Programmable with microprocessors, comprising a general totaliser, a counter with 2 presets, single preset counter programmable as a tachometer, & an hour meter programmable scaling and reset modes LED Display Programmable zero shift and permanent display of the programmed parameter Operating temperature 0 to +50°C IP65 rating Relay outputs

Baumer

［Discontinued］Baumer 6 Digit, LED, Digital Counter, 10kHz, 115 V ac, 230 V ac　N214.002AX01

N 214 series totalising counters. Large, 14 mm red LED display. Programmable zero shift. Impulse scaling factor. Dual-voltage meters, selectable by internal switch.

Baumer

［Discontinued］Front Panel with Transparent Protection Cover Baumer Z100.02A for use with FS304 Type Socket Box　Z100.02A

FS 314 series 5-Digit preset counters. Counts down pulses from a preset value and triggers a change-over contact on reaching zero (30 W / 100 VA / 220 VAC 2 A max.). Contacts return to original position when the counter is reset to zero. Press the reset button to repeat the cycle. Speed for a pulse / pause ratio : 1: - 20 pulses / sec. in Vdc min. 25 ms / max. unlimited - 10 pulses / sec. in Vac min. 50 ms/max. unlimited. Protection index IP40 and IP55 with PVC protector.

Baumer

［Discontinued］Baumer 5 Digit, Mechanical, Digital Counter, 60Hz, 230 V ac　FS314.550AA9B

Count Down. Counts down pulses from a pre-set value and triggers a changeover contact on reaching zero Contacts return to original position when counter is reset to zero Electrical connection via supplied plug in clips Offers IP40 protection with cover (sold seperately) SPDT contact rated to 230Vac 2A

Baumer

［Discontinued］Baumer 5 Digit, LED, Digital Counter, 10kHz, 22 → 50 V ac　NE216.011AX01

LED Dual Preset. Up/down counters with NPN/PNP or AC logic inputs Resettable Front fascia sealed to IP54 Greater than 10 year data retention

Baumer

［Discontinued］Baumer 5 Digit, LED, Digital Counter, 15kHz, 265 V ac, 300 V dc　NE1218.014AX01