Mecalectro

Push Pull Action Tubular Solenoid, 10mm stroke, 24 V dc, 8.5W　810BA83

Linear solenoids: single-acting, heavy-duty, protected design. Single-acting linear solenoids for automated systems, various machines and security applications. Permanent duty (duty factor 100%) for voltages lower than or equal to rated voltage. For models with 24 VDC and intermittent operation, greater force can be obtained using a power supply with higher voltage (in compliance with the applicable standards).

Johnson Electric

Rotary Solenoid, 28.6 mm Diameter　H-2744-032

Mecalectro

Push Pull Action DC D-Frame Solenoid, 3mm stroke, 2W, 24 V dc　8.M10 02 62 24 VCC 100%

8M10 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Can be used as push or pull models. Coil for duty cycle of 100% (permanent duty) or 25%. For pulse operation, a higher operating force can be obtained with a power supply above the rated voltage, up to a limit of 50 Vdc.

Mecalectro

Push Pull Action DC D-Frame Solenoid, 3mm stroke, 7W, 12 V dc　8.M10 02 62 12 VCC 25%

8M10 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Can be used as push or pull models. Coil for duty cycle of 100% (permanent duty) or 25%. For pulse operation, a higher operating force can be obtained with a power supply above the rated voltage, up to a limit of 50 Vdc.

Mecalectro

Pull Action DC D-Frame Solenoid, 6mm stroke, 4W, 12 V dc　8.M11 AA 52 12 VCC 100%

8M11 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Fitted with a return spring and available as a push or pull model. Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50Vdc

Mecalectro

Push Action DC D-Frame Solenoid, 6mm stroke, 4W, 12 V dc　8.M11 AA 62 12 VCC 100%

8M11 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Fitted with a return spring and available as a push or pull model. Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50Vdc

Mecalectro

Push Action DC D-Frame Solenoid, 15mm stroke, 15W, 24 V dc　8.M15 02 62 24 VCC 100%

8M15 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for automated systems. Push or pull models available. Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50 Vdc.

Mecalectro

Pull Action DC D-Frame Solenoid, 24mm stroke, 19W, 12 V dc　8.M17 02 73 12 VCC 100%

8M17 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for automated systems. Push or pull models available. Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50 Vdc.

Solentec Limited

Pull Action DC D-Frame Solenoid, 10mm stroke, 3W, 12 V dc　SD0630 12V

Solentec D-Frame Solenoid. Solentec D-Frame pull action DC solenoids suitable for industrial applications where a long stroke and large force is required such as locks, interlocks, ratchet movement devices, diverters and shifters. Pull or thrust action High efficiency Robustly constructed Corrosion resistant plated parts Flying leads

Solentec Limited

Pull Action DC D-Frame Solenoid, 10mm stroke, 5W, 24 V dc　SD0837 24V

Solentec D-Frame Solenoid. Solentec D-Frame pull action DC solenoids suitable for industrial applications where a long stroke and large force is required such as locks, interlocks, ratchet movement devices, diverters and shifters. Pull or thrust action High efficiency Robustly constructed Corrosion resistant plated parts Flying leads

Mecalectro

Push Action DC D-Frame Solenoid, 7mm stroke, 10W, 24 V dc　856AA62

Heavy duty single-acting linear electromagnets. Single-acting linear electromagnets for controllers, electrical equipment, machines, safety applications, etc. Designed for in excess of 5 million operations. Sliding core with PTFE layer inside a metal tube. Equipped with spring return (removable), push or pull model. Permanent duty (duty factor 100%) for voltages lower than or equal to rated voltage. During intermittent operation, greater force can be obtained using a power supply with higher voltage (in compliance with the applicable standards).

Mecalectro

Push Pull Action DC D-Frame Solenoid, 15mm stroke, 16W, 24 V dc　Z815AB83

Heavy duty single-acting linear electromagnets. Single-acting linear electromagnets for controllers, electrical equipment, machines, safety applications, etc. Designed for in excess of 5 million operations. Sliding core with PTFE layer inside a metal tube. Equipped with spring return (removable), push or pull model. Permanent duty (duty factor 100%) for voltages lower than or equal to rated voltage. During intermittent operation, greater force can be obtained using a power supply with higher voltage (in compliance with the applicable standards).

Mecalectro

Tubular Solenoid, 14mm stroke, 24 V dc, 12W　813AB83

Linear solenoids: single-acting, heavy-duty, protected design. Single-acting linear solenoids for automated systems, various machines and security applications. Permanent duty (duty factor 100%) for voltages lower than or equal to rated voltage. For models with 24 VDC and intermittent operation, greater force can be obtained using a power supply with higher voltage (in compliance with the applicable standards).

Mecalectro

Push Pull Action Tubular Solenoid, 16mm stroke, 24 V dc, 18W　819AB83

Linear solenoids: single-acting, heavy-duty, protected design. Single-acting linear solenoids for automated systems, various machines and security applications. Permanent duty (duty factor 100%) for voltages lower than or equal to rated voltage. For models with 24 VDC and intermittent operation, greater force can be obtained using a power supply with higher voltage (in compliance with the applicable standards).

RS PRO

Pull Action DC D-Frame Solenoid, 24 V　177-0113

RS PRO

Push Action DC D-Frame Solenoid, 24 V　177-0114

RS PRO

Pull Action DC D-Frame Solenoid, 12 V　177-0115

RS PRO

Pull Action DC D-Frame Solenoid, 12 V　177-0116

RS PRO

Pull Action DC D-Frame Solenoid, 24 V　177-0117

RS PRO

Pull Action DC D-Frame Solenoid, 12 V　177-0118

RS PRO

Pull Action DC D-Frame Solenoid, 6 V　177-0119

RS PRO

Pull Action DC D-Frame Solenoid, 12 V　177-0120

RS PRO

Pull Action DC D-Frame Solenoid, 12 V　177-0122

RS PRO

Pull Action DC D-Frame Solenoid, 24 V　177-0123

RS PRO

Pull Action DC D-Frame Solenoid, 24 V　177-0125

RS PRO

Pull Action DC D-Frame Solenoid, 12 V　177-0127

RS PRO

Pull Action DC D-Frame Solenoid, 24 V　177-0129

RS PRO

Pull Action DC D-Frame Solenoid, 24 V　177-0130

RS PRO

Pull Action DC D-Frame Solenoid, 24 V　177-0133

RS PRO

Pull Action DC D-Frame Solenoid, 12 V　177-0135

RS PRO

Pull Action DC D-Frame Solenoid, 6 V　177-0136

RS PRO

RS PRO Linear Solenoid Actuator, 12 V, 26 x 20 x 36.8 mm　177-0139

RS PRO

Pull Action Tubular Solenoid, 24 V, 40W　177-0141

RS PRO

Pull Action Tubular Solenoid, 12 V, 40W　177-0142

RS PRO

Pull Action Tubular Solenoid, 12 V, 70W　177-0144

Mecalectro

Push Pull Action DC D-Frame Solenoid, 3mm stroke, 2W, 12 V dc　8.M10 02 62 12 VCC 100%

8M10 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Can be used as push or pull models. Coil for duty cycle of 100% (permanent duty) or 25%. For pulse operation, a higher operating force can be obtained with a power supply above the rated voltage, up to a limit of 50 Vdc.

Mecalectro

Pull Action DC D-Frame Solenoid, 6mm stroke, 4W, 24 V dc　8.M11 AA 52 24 VCC 100%

8M11 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Fitted with a return spring and available as a push or pull model. Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50Vdc

Mecalectro

Push Action DC D-Frame Solenoid, 6mm stroke, 4W, 24 V dc　8.M11 AA 62 24 VCC 100%

8M11 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Fitted with a return spring and available as a push or pull model. Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50Vdc

Mecalectro

Pull Action DC D-Frame Solenoid, 9mm stroke, 6.5W, 12 V dc　8.M13 02 52 12 VCC 100%

8M13 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Push or pull models available. Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50 Vdc.

Mecalectro

Pull Action DC D-Frame Solenoid, 9mm stroke, 6.5W, 24 V dc　8.M13 02 52 24 VCC 100%

8M13 series single-acting linear electromagnets, standard use. Single-acting linear electromagnets for use in automation and small mechanisms. Push or pull models available. Coils for permanent duty (duty factor 100 %). For intermittent operation, a superior operating effort may be obtained with a power supply that is above the rated voltage, up to 50 Vdc.