[KNITTER-SWITCH]DIP & SIP Switches
Filters
-
10 Way Surface Mount DIP Switch, Rotary Flush Actuator SMR5010
Subminiature Rotary Coded Switches (SMT) - SMR 5000 Series. Surface mounting Tape sealed and washable Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 670
USD: 4.20
-
16 Way Through Hole DIP Switch, Rotary Flush Actuator DRR60016
Subminiature Rotary Coded Switches - DRR ; DRS 60000 Series. 24 Vdc, 25 mA switching Dielectric strength: 250 V, 50 Hz for the duration of 1 minute Case: PA6T meets UL 94 V–0, cover light grey, base black Rotor: grey, complementary type beige On pc-board mounting with spacing 2,54 mm Auto-soldering – max.: 5 sec, 260° C
1 products found
JPY: 940
USD: 5.90
-
10 Way Through Hole DIP Switch, Rotary Flush Actuator DRR3010
Subminiature Rotary Coded Switches - DRR and DRS 3000 ; 4000 Series. Through hole mount Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 560
USD: 3.51
-
10 Way Through Hole Rotary Switch, Rotary Coded Actuator DRS 3110
Subminiature Rotary Coded Switches - DRR and DRS 3000 ; 4000 Series. Through hole mount Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 600
USD: 3.76
-
16 Way Through Hole Rotary Switch, Rotary Coded Actuator DRR 3116
Subminiature Rotary Coded Switches - DRR and DRS 3000 ; 4000 Series. Through hole mount Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 720
USD: 4.52
-
10 Way Surface Mount Rotary Switch, Rotary Coded Actuator, IP67 SMR 60110
Subminiature Rotary Coded Switches (SMT) - SMR 6000 Series. These surface mount PCB subminiature rotary coded switches are available with or without an extended shaft actuator and a choice of BCD or hexadecimal coding. The rotary switches have a voltage rating of 24 V dc and a dielectric strength of 250 V for the period of 1 min.
1 products found
JPY: 840
USD: 5.27
-
4 Way Surface Mount DIP Switch 4PST, Flat Actuator SBS 60004
Knitter Switch SBS 600xx Series DIP Switches. The SBS 600xx series has been designed for surface mounting and is available with various contact configurations. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 13,000
USD: 81.55
-
8 Way Surface Mount DIP Switch 8PST, Flat Actuator SBP 8108
Knitter Switch SBP 8100 Series DIP Switches. The SBD 8100 series has been designed for surface mounting applications with various contact configurations available. The flat actuators are right angle mounted and operated by 20° vertical movement. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 9,600
USD: 60.22
-
8 Way PCB DIP Switch 8PST, Raised Actuator DBS 6108
Knitter Switch DBS 61xx Series DIP Switches. The DBS 61xx series has been designed for PCB through-hole mounting with various contact configurations available. The raised actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 8,640
USD: 54.20
-
［Out of stock］16 Way Surface Mount DIP Switch, Rotary Flush Actuator SMR5016
Subminiature Rotary Coded Switches (SMT) - SMR 5000 Series. Surface mounting Tape sealed and washable Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 790
USD: 4.96
-
［Discontinued］16 Way Through Hole DIP Switch, Rotary Flush Actuator DRS60016
Subminiature Rotary Coded Switches - DRR ; DRS 60000 Series. 24 Vdc, 25 mA switching Dielectric strength: 250 V, 50 Hz for the duration of 1 minute Case: PA6T meets UL 94 V–0, cover light grey, base black Rotor: grey, complementary type beige On pc-board mounting with spacing 2,54 mm Auto-soldering – max.: 5 sec, 260° C
1 products found
JPY: 620
USD: 3.89
-
［Discontinued］16 Way Through Hole DIP Switch, Rotary Flush Actuator DRS60116
Subminiature Rotary Coded Switches - DRR ; DRS 60000 Series. 24 Vdc, 25 mA switching Dielectric strength: 250 V, 50 Hz for the duration of 1 minute Case: PA6T meets UL 94 V–0, cover light grey, base black Rotor: grey, complementary type beige On pc-board mounting with spacing 2,54 mm Auto-soldering – max.: 5 sec, 260° C
1 products found
JPY: 590
USD: 3.70
-
［Discontinued］10 Way Through Hole DIP Switch, Rotary Shaft Actuator DRS61010
Subminiature Rotary Coded Switches - DRR ; DRS 60000 Series. 24 Vdc, 25 mA switching Dielectric strength: 250 V, 50 Hz for the duration of 1 minute Case: PA6T meets UL 94 V–0, cover light grey, base black Rotor: grey, complementary type beige On pc-board mounting with spacing 2,54 mm Auto-soldering – max.: 5 sec, 260° C
1 products found
JPY: 370
USD: 2.32
-
［Out of stock］10 Way Through Hole DIP Switch, Rotary Flush Actuator DRR60010
Subminiature Rotary Coded Switches - DRR ; DRS 60000 Series. 24 Vdc, 25 mA switching Dielectric strength: 250 V, 50 Hz for the duration of 1 minute Case: PA6T meets UL 94 V–0, cover light grey, base black Rotor: grey, complementary type beige On pc-board mounting with spacing 2,54 mm Auto-soldering – max.: 5 sec, 260° C
1 products found
JPY: 930
USD: 5.83
-
［Out of stock］10 Way Through Hole DIP Switch, Rotary Flush Actuator DRS13010
Microminiature Rotary Encoded Switches - DRS 13000 ; 14000 Series. Contact rating: 50 V DC, 100 mA, non-switching, 5 V DC, 100 mA, switching Dielectric strength: 250 V, 50 Hz for the duration of 1 minute Standard types have ivory coloured rotor, complementary types have red rotor Totally sealed case, suitable for washing PCB mounting Auto-soldering – max.: 3 sec, 250º C
1 products found
JPY: 1,000
USD: 6.27
-
［Discontinued］16 Way Through Hole DIP Switch, Rotary Flush Actuator DRS13016
Microminiature Rotary Encoded Switches - DRS 13000 ; 14000 Series. Contact rating: 50 V DC, 100 mA, non-switching, 5 V DC, 100 mA, switching Dielectric strength: 250 V, 50 Hz for the duration of 1 minute Standard types have ivory coloured rotor, complementary types have red rotor Totally sealed case, suitable for washing PCB mounting Auto-soldering – max.: 3 sec, 250º C
1 products found
JPY: 800
USD: 5.02
-
［Discontinued］10 Way Through Hole DIP Switch, Rotary Shaft Actuator DRR4010
Subminiature Rotary Coded Switches - DRR and DRS 3000 ; 4000 Series. Through hole mount Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 1,480
USD: 9.28
-
［Discontinued］16 Way Through Hole DIP Switch, Rotary Shaft Actuator DRR4016
Subminiature Rotary Coded Switches - DRR and DRS 3000 ; 4000 Series. Through hole mount Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 320
USD: 2.01
-
［Discontinued］16 Way Through Hole Rotary Switch, Rotary Coded Actuator DRS 3116
Subminiature Rotary Coded Switches - DRR and DRS 3000 ; 4000 Series. Through hole mount Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 480
USD: 3.01
-
［Discontinued］10 Way Through Hole Rotary Switch, Rotary Coded Actuator DRR 3110
Subminiature Rotary Coded Switches - DRR and DRS 3000 ; 4000 Series. Through hole mount Contact resistance: ; 100 mΩ Insulation resistance: > 1000 MΩ at 250 V DC Mechanical life: minimum 20 000 operations
1 products found
JPY: 550
USD: 3.45
-
［Discontinued］10 Way Surface Mount Rotary Switch, Rotary Coded Actuator SMR 5110
Knitter-Switch Rotary Coded Switches SMR. Product Description Knitter-Switch Rotary coded switches are available in both BCD and Hexadecimal inverse coding. The SMR range has a mechanical life of 20000 operations and boasts gold plated contacts. The SMR series is suitable for SMD mounting and have a contact rating of 15 V dc at 30 mA switching.
1 products found
JPY: 500
USD: 3.14
-
［Discontinued］10 Way Surface Mount Rotary Switch, Rotary Coded Actuator, IP67 SMR 61110
Subminiature Rotary Coded Switches (SMT) - SMR 6000 Series. These surface mount PCB subminiature rotary coded switches are available with or without an extended shaft actuator and a choice of BCD or hexadecimal coding. The rotary switches have a voltage rating of 24 V dc and a dielectric strength of 250 V for the period of 1 min.
1 products found
JPY: 640
USD: 4.02
-
［Discontinued］16 Way Surface Mount Rotary Switch, Rotary Coded Actuator, IP67 SMR 61116
Subminiature Rotary Coded Switches (SMT) - SMR 6000 Series. These surface mount PCB subminiature rotary coded switches are available with or without an extended shaft actuator and a choice of BCD or hexadecimal coding. The rotary switches have a voltage rating of 24 V dc and a dielectric strength of 250 V for the period of 1 min.
1 products found
JPY: 340
USD: 2.13
-
［Out of stock］16 Way Surface Mount Rotary Switch, Rotary Coded Actuator, IP67 SMR 60116
Subminiature Rotary Coded Switches (SMT) - SMR 6000 Series. These surface mount PCB subminiature rotary coded switches are available with or without an extended shaft actuator and a choice of BCD or hexadecimal coding. The rotary switches have a voltage rating of 24 V dc and a dielectric strength of 250 V for the period of 1 min.
1 products found
JPY: 1,000
USD: 6.27
-
［Discontinued］2 Way PCB DIP Switch 2PST, Flat Actuator DBS 60002
Knitter Switch DBS 600xx Series DIP Switches. The DBS 600xx series has been designed for PCB through-hole mounting with various contact configurations available. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 8,960
USD: 56.20
-
［Discontinued］4 Way PCB DIP Switch 4PST, Flat Actuator DBS 60004
Knitter Switch DBS 600xx Series DIP Switches. The DBS 600xx series has been designed for PCB through-hole mounting with various contact configurations available. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 8,340
USD: 52.32
-
［Discontinued］8 Way PCB DIP Switch 8PST, Flat Actuator DBS 60008
Knitter Switch DBS 600xx Series DIP Switches. The DBS 600xx series has been designed for PCB through-hole mounting with various contact configurations available. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 4,190
USD: 26.28
-
［Out of stock］4 Way PCB DIP Switch 4PST, Raised Actuator DBS 61004
Knitter Switch DBS 610xx Series DIP Switches. The DBS 610xx series has been designed for PCB through-hole mounting with various contact configurations available. The raised actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 13,400
USD: 84.06
-
［Discontinued］2 Way PCB DIP Switch 2PST, Raised Actuator DBS 61002
Knitter Switch DBS 610xx Series DIP Switches. The DBS 610xx series has been designed for PCB through-hole mounting with various contact configurations available. The raised actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 8,170
USD: 51.25
-
［Discontinued］4 Way PCB DIP Switch 4PST, Flat Actuator DBP 8104
Knitter Switch DBP 8100 Series DIP Switches. The DBP 8100 series has been designed for PCB through-hole mounting with various contact configurations available. The flat actuators are right angle mounted and operated by 20° vertical movement. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 5,640
USD: 35.38
-
［Discontinued］6 Way PCB DIP Switch 6PST, Raised Actuator DBS 61006
Knitter Switch DBS 610xx Series DIP Switches. The DBS 610xx series has been designed for PCB through-hole mounting with various contact configurations available. The raised actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 4,010
USD: 25.15
-
［Out of stock］8 Way PCB DIP Switch 8PST, Raised Actuator DBS 61008
Knitter Switch DBS 610xx Series DIP Switches. The DBS 610xx series has been designed for PCB through-hole mounting with various contact configurations available. The raised actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 10,100
USD: 63.36
-
［Discontinued］2 Way PCB DIP Switch 2PST, Flat Actuator DBP 8102
Knitter Switch DBP 8100 Series DIP Switches. The DBP 8100 series has been designed for PCB through-hole mounting with various contact configurations available. The flat actuators are right angle mounted and operated by 20° vertical movement. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 8,440
USD: 52.94
-
［Discontinued］8 Way PCB DIP Switch 8PST, Flat Actuator DBP 8108
Knitter Switch DBP 8100 Series DIP Switches. The DBP 8100 series has been designed for PCB through-hole mounting with various contact configurations available. The flat actuators are right angle mounted and operated by 20° vertical movement. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 5,450
USD: 34.19
-
［Discontinued］2 Way Surface Mount DIP Switch 2PST, Flat Actuator DHS 602
Knitter Switch DHS 6xx Series DIP Switches. The DHS 6xx series has been designed for surface mounting and is available with various contact configurations. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 1,650
USD: 10.35
-
［Discontinued］2 Way Surface Mount DIP Switch 2PST, Flat Actuator SBS 60002
Knitter Switch SBS 600xx Series DIP Switches. The SBS 600xx series has been designed for surface mounting and is available with various contact configurations. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 17,600
USD: 110.40
-
［Discontinued］4 Way Surface Mount DIP Switch 4PST, Flat Actuator DHS 604 J
Knitter Switch DHS 6xx Series DIP Switches. The DHS 6xx series has been designed for surface mounting and is available with various contact configurations. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 4,350
USD: 27.29
-
［Discontinued］8 Way Surface Mount DIP Switch 8PST, Flat Actuator DHS 608
Knitter Switch DHS 6xx Series DIP Switches. The DHS 6xx series has been designed for surface mounting and is available with various contact configurations. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 4,360
USD: 27.35
-
［Out of stock］8 Way Surface Mount DIP Switch 8PST, Flat Actuator SBS 60008
Knitter Switch SBS 600xx Series DIP Switches. The SBS 600xx series has been designed for surface mounting and is available with various contact configurations. The flat actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications. They are sealed with a protective tape making them washable by water or alcohol-based cleaners.
1 products found
JPY: 11,300
USD: 70.88
-
［Discontinued］2 Way Surface Mount DIP Switch 2PST, Raised Actuator SBS 61002 T
Knitter Switch SBS 610xx T Series DIP Switches. The SBS 610xx T series has been designed for surface mounting and is available with various contact configurations. The raised actuators are mounted on top of the body and operated with a horizontal sliding motion. With a wide operating temperature range and a high mechanical life cycle they can be used in a variety of applications.
1 products found
JPY: 3,070
USD: 19.26
