[Murrelektronik Limited]Automation & Control Gear
Filters
-
Murrelektronik Limited Current, Voltage Output, Signal Conditioner 7000-31261-0000000
Murrelektronik Propotional Amplifier. MurrElektronik propotional amplifier regulates the current supply to a proportional valve. The current is proportional to the set-point on the amplifier's input. A voltage output of 10 V is available for set-point adjustment. Features and Benefits. Status LED. Control electronics for proportional valves. Screw terminals. Start-up: 10 s. 35mm DIN Rail mounting
1 products found
JPY: 69,900
USD: 438.46
-
Murrelektronik Limited Current, Voltage Output, Signal Conditioner 7000-31271-0000000
Murrelektronik Propotional Amplifier. MurrElektronik propotional amplifier regulates the current supply to a proportional valve. The current is proportional to the set-point on the amplifier's input. A voltage output of 10 V is available for set-point adjustment. Features and Benefits. Status LED. Control electronics for proportional valves. Screw terminals. Start-up: 10 s. 35mm DIN Rail mounting
1 products found
JPY: 73,100
USD: 458.54
-
Murrelektronik Limited Current, Voltage Output, Signal Conditioner 44332
Murrelektronik MTW 12.4 Temperature Converter. MurrElektronik MTW 12.4 series temperature monitoring relays are designed specially for monitoring abnormal temperatures to prevent excessive temperature increase and to protect equipment. The temperature converter works in conjunction with a PT100 temperature sensor and convert the temperature into a standard output signal. Features and Benefits. Status LED. 2 or 3 wire sensor operation. 0 V to 10 V, 4 mA to 20 mA and 0 mA to 20 mA outputs. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 75,300
USD: 472.34
-
Murrelektronik Limited Current, Voltage Output, Signal Conditioner 44207
Murrelektronik MULTI Converter 12.4. MurrElektronik MULTI Converter 12.4 series analog converters convert standard signal formats galvanically separated into a 0 V to 10 V signal. An integrated current limiter ensures the output is short-circuit and overload protected. Features and Benefits. Status LED. Input and output galvanically separated. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 129,000
USD: 809.18
-
Murrelektronik Limited Voltage Output, Signal Conditioner 3000-62004-8200010
Murrelektronik MIRO 12.4 Signal Conditioner. MurrElektronik MIRO 12.4 series signal conditioner modules are designed to connect a potentiometer, 3-wire sensors or mechanical switches. The modules output voltage can be set from 0 V to 10 V, independently of the measuring range of the input used. Features and Benefits. Status LED. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 45,900
USD: 287.92
-
Murrelektronik Limited Current, Voltage Output, Signal Conditioner 6644334
Murrelektronik MTW 12.4 Temperature Converter. MurrElektronik MTW 12.4 series temperature monitoring relays are designed specially for monitoring abnormal temperatures to prevent excessive temperature increase and to protect equipment. The temperature converter works in conjunction with a PT100 temperature sensor and convert the temperature into a standard output signal. Features and Benefits. Status LED. 2 or 3 wire sensor operation. 0 V to 10 V, 4 mA to 20 mA and 0 mA to 20 mA outputs. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 75,300
USD: 472.34
-
Murrelektronik Limited Current, Voltage Output, Signal Conditioner 44331
Murrelektronik MTW 12.4 Temperature Converter. MurrElektronik MTW 12.4 series temperature monitoring relays are designed specially for monitoring abnormal temperatures to prevent excessive temperature increase and to protect equipment. The temperature converter works in conjunction with a PT100 temperature sensor and convert the temperature into a standard output signal. Features and Benefits. Status LED. 2 or 3 wire sensor operation. 0 V to 10 V, 4 mA to 20 mA and 0 mA to 20 mA outputs. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 75,300
USD: 472.34
-
Murrelektronik Limited Current, Voltage Output, Signal Conditioner 44275
Murrelektronik MF..W 12.4 Signal Conditioner. MurrElektronik MF..W 12.4 series frequency converter in the slim MIRO housing can be universally used. The frequency that is applied on the three inputs, are galvanically isolated, transformed and is available as analogue signal on all three outputs. Features and Benefits. Status LED. Input and output galvanically separated. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 90,300
USD: 566.43
-
Murrelektronik Limited Current, Voltage Output, Signal Conditioner 6644110
Murrelektronik MAK 12.4 Voltage Comparrator. MurrElektronik MAK 12.4 series voltage comparrator is designed for evaluating analog voltages, generated by pressure, temperature or other sensors. The analog input values are compared to internal or external reference voltages to over or underflow. Outputs will be switched, dependent on defined limits. Features and Benefits. Status LED. Compact design. 3 transistor outputs. 2 separate measuring channels. DIP switch configuration. 35mm DIN Rail mounting
1 products found
JPY: 62,900
USD: 394.56
-
Murrelektronik Limited Current Output, Signal Conditioner 44233
Murrelektronik MU.W 6.2 Signal Conditioner. MurrElektronik MUW 6.2 series analog converters convert standard signal formats galvanically separated into a 4 mA to 20 mA signal. An integrated current limiter ensures the output is short-circuit and overload protected. Features and Benefits. Status LED. Input and output galvanically separated. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 88,900
USD: 557.65
-
Murrelektronik Limited Jumper Bar, Max. Forward 250 V, Max. Input 36 A, 121.5mm Length, Plug-In Mounting Style 3000-90000-0300010
Optocoupler Accessories for MIRO Series. Accessories for use with MIRO series Optocouplers. Plug links 10-Pole rails Wire chain Labels Isolated plate
1 products found
JPY: 1,660
USD: 10.41
-
Murrelektronik Limited Jumper Bar, Max. Forward 250 V, Max. Input 36 A, 121.5mm Length, Plug-In Mounting Style 3000-90000-0300020
Optocoupler Accessories for MIRO Series. Accessories for use with MIRO series Optocouplers. Plug links 10-Pole rails Wire chain Labels Isolated plate
1 products found
JPY: 1,660
USD: 10.41
-
Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 10 mA, 78mm Length, DIN Rail 52520
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 19,800
USD: 124.20
-
Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 10 mA, 78mm Length, DIN Rail 6652520
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 20,800
USD: 130.47
-
Murrelektronik Limited Optocoupler, Max. Forward 48 (On) V dc, 5 (Off) V dc, Max. Input 6 mA, 78mm Length, DIN Rail 52501
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 10,600
USD: 66.49
-
Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 6 mA, 78mm Length, DIN Rail 52500
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 11,100
USD: 69.63
-
Murrelektronik Limited Optocoupler, Max. Forward 48 (On) V dc, 5 (Off) V dc, Max. Input 6 mA, 78mm Length, DIN Rail 6652501
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 16,400
USD: 102.87
-
Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 6 mA, 90mm Length, DIN Rail 52510
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 16,600
USD: 104.13
-
Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 6 mA, 78mm Length, DIN Rail 6652500
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 17,400
USD: 109.15
-
Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 6 mA, 90mm Length, DIN Rail 6652510
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 16,600
USD: 104.13
-
Murrelektronik Limited Optocoupler, Max. Forward 30 (On) V dc, 7 (Off) V dc, Max. Input 5.5 mA, 90mm Length, DIN Rail 526100
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 17,400
USD: 109.15
-
Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 10 mA, 78mm Length, DIN Rail 6652519
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 16,600
USD: 104.13
-
Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 6 mA, 78mm Length, DIN Rail 52519
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 20,800
USD: 130.47
-
Murrelektronik Limited Optocoupler, Max. Forward 48 (On) V dc, 5 (Off) V dc, Max. Input 6 mA, 90mm Length, DIN Rail 52503
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 16,600
USD: 104.13
-
Murrelektronik Limited Optocoupler, Max. Forward 48 (On) V dc, 5 (Off) V dc, Max. Input 6 mA, 90mm Length, DIN Rail 6652503
MIRO TR DIN Rail Optocoupler. MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out. DIN Rail mounting Compact, 6.2 mm width Made to last No mechanical wear Silent operation No contact bounce times Short switching times Models with switching frequencies up to 500 kHz Shock and vibration resistant Low input power LED (yellow) input display Spring clamp or screw terminals
1 products found
JPY: 16,400
USD: 102.87
-
Murrelektronik Limited Jumper Bar Plug-In Mounting Style 90975
Optocoupler Accessories for MIRO Series. Accessories for use with MIRO series Optocouplers. Plug links 10-Pole rails Wire chain Labels Isolated plate
1 products found
JPY: 2,560
USD: 16.06
-
Murrelektronik Limited Jumper Bar Plug-In Mounting Style 90976
Optocoupler Accessories for MIRO Series. Accessories for use with MIRO series Optocouplers. Plug links 10-Pole rails Wire chain Labels Isolated plate
1 products found
JPY: 2,560
USD: 16.06
-
Murrelektronik Limited Jumper Bar Plug-In Mounting Style 90961
Optocoupler Accessories for MIRO Series. Accessories for use with MIRO series Optocouplers. Plug links 10-Pole rails Wire chain Labels Isolated plate
1 products found
JPY: 1,040
USD: 6.52
-
Murrelektronik Limited Optocoupler, Max. Forward 30 V ac/dc, Max. Input 9 mA, 93mm Length, DIN Rail Mounting Style 3000-32512-2100040
MIRO Pluggable Module Optocoupler. Pluggable mounting Compact 6.2 mm width LED (yellow) input display 24 V dc voltage Spring clamp terminals IP20 protection
1 products found
JPY: 13,200
USD: 82.80
-
Murrelektronik Limited Optocoupler, Max. Forward 30 V ac/dc, Max. Input 9 mA, 15mm Length, Plug-In Mounting Style 3000-32522-2100040
MIRO Pluggable Module Optocoupler. Pluggable mounting Compact 6.2 mm width LED (yellow) input display 24 V dc voltage Spring clamp terminals IP20 protection
1 products found
JPY: 13,200
USD: 82.80
-
［Discontinued］Murrelektronik Limited Analogue Output, Signal Conditioner 44073
Murrelektronik MDW Signal Conditioner. MurrElektronik MDW series signal converters for converting a range of process signals into standard active and passive transmission current or voltage signals. Features and Benefits. Status LED. Input and output galvanically separated. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 41,200
USD: 258.44
-
［Discontinued］Murrelektronik Limited Voltage Output, Signal Conditioner 526114
Murrelektronik Earth Fault Signal Conditioner. MurrElektronik earth fault relays provides monitoring of earth fault currents. When the fault current rises above the selected level, the output contacts of the product operate. Features and Benefits. Status LED. Screw terminals. 35mm DIN Rail mounting
1 products found
JPY: 22,300
USD: 139.88
-
［Discontinued］Murrelektronik Limited Label, 10mm Length, Plug-In Mounting Style 3000-90000-0300040
Optocoupler Accessories for MIRO Series. Accessories for use with MIRO series Optocouplers. Plug links 10-Pole rails Wire chain Labels Isolated plate
1 products found
JPY: 1,060
USD: 6.65
