[Festo]Hose, Water Sprinkler, Faucet
Filters
-
Blanking Plug QS Series without 12 mm QSC-12H-20
The Festo blanking plug QSC-12H-20 is standard size and can be assembled in any position. Container Size 20 Operating Pressure Full Temperature Range: -0, 95-6 bar Temperature Dependent Operating Pressure: -0, 95-14 bar
1種類の製品があります
JPY: 8,780
USD: 54.63
-
Without Tube Cap QS Series 10 mm QSC-10-50
The Festo push-in cap QSC-10-50 has one of the assembly positions in standard size. Container Size: 50 Design Structure: Push/Pull System Operating Pressure Total Temperature Range: -0,95-6 bar
1 products found
JPY: 24,700
USD: 153.68
-
Air Joint Connector A: G 1/8 Female Connector B: Push-In 4 mm Tube Screwed QSF-18-4-B-100
FESTO push-in connectors are small, nominal size 2.6 mm, and assembled in any position. Uses a push/pull design with PBT housing material. Container Size: 100 Ambient Temperature: -10 → 80 °C
1 products found
JPY: 84,100
USD: 523.27
-
Quick Connect Coupling NPHS-S6-M-BC9
Push-in T-fittings NPQM-T-G38-Q12-P10 are attractively priced metal push-in fittings for pneumatic applications with temperature ranges up to 70 °C and pressure ranges up to 16 bar. Standard size Nominal size: 11 mm Threaded stud seal ring seal type Design Structure: Push/pull type Operating pressure Full temperature range: -0 95 ~ 16 bar
1 products found
JPY: 12,900
USD: 80.26
-
One-Touch Pipe Fitting CQT-12 Series Yes No CQT-12
Nut Festo CR-M45 x 1.5 (for type CRHD) is made of high alloy steel. Copper and PTFE are not used. Assembly location Optional corrosion resistance classification CRC 4 - Very high corrosion stress Product weight: 89 gMaterial installation: High alloy steel, non-corrosive
1 products found
JPY: 2,910
USD: 18.11
-
One Touch Fitting QST-8-50 Series No No QST-8-50
Festo T-type Tube to Tube Adapter, Push-in 8 mm - Push-in 8 mm - QST Series This push-in adapter from Festo can be used for corrosion resistant high pressure applications between pneumatic tubes and at temperatures up to +80 °C. This fitting simplifies the process of connecting pipes and allows them to be aligned once connected to the tube. The unit has a low-friction PTFE (polytetrafluoroethylene) coating for easy pipe sliding. The connector can be reused up to five times and has a self-retaining claw to securely hold the pipe without damaging the surface. Tube to Tube Connection Connector A is push-in 8 mm Connector B is push-in 8 mm PBT body material (polybutylene terephthalate) Not chemically resistant. Not food grade.Nominal dimensions 5 mm.Operating pressure range: -0.95 ~ 6 bar.Ambient temperature range: -10 to +80 °C.Range Information Festo QS adapters are flame-resistant for use in automotive and construction welding systems that can cause sparks. The series also features push-in fittings with swivel connectors for full circle rotation. It is also equipped with a self-sealing unit that automatically blocks the air flow through the pneumatic pipes when the tube is removed from the unit. Push-in T-Connector NPQM-T-Q8-S8-P10 An attractively priced metal push-in fitting for pneumatic applications with a temperature range of up to 70 °C and a pressure range of up to 16 bar. Size Standard Nominal dimensions 5.5 mm Design structure: Push/pull system Operating pressure Total temperature range: -0, 95-16 bar Operating Medium compressed air according to ISO8573 -1: 2010 [7: -: -]
1 products found
JPY: 67,900
USD: 422.47
-
Pneumatic Elbow Screw-to-Tube Adapter QSW-18-6
Festo push-in fitting QSW-1/8-6 has hexagonal holes on the outsideMale screw Size: StandardNominal size: 3, 3 mmScrew stud seal type: CoatingAssembly position: AnyContainer size: 10
1 products found
JPY: 13,800
USD: 85.86
-
Pneumatic Elbow Screw-to-Tube Adapter NPQM-LK-G14-Q8-P10
The standard size of the Festo push-in L-shaped NPQM-LK-G14-Q8-P10 is a nominal size of 5.5 mm. Screw stud seal type: Sealing ring Design structure: Push/pull type Operating pressure Total temperature range: -0, 95-16 bar
1 products found
JPY: 21,900
USD: 136.26
-
Air Joint QSY-38-10
The Festo QSY series is a high-quality pneumatic connector for maximum flexibility and quick installation. It has a convenient push-in type Y-joint type. Push-in coupling system convenient for compressed air and water. With a nominal size of 7.4 mm, it is reorientable for external hex holes assembled in any position. Ambient temperature: -10 → 80 °C Container size is 10
1 products found
JPY: 41,000
USD: 255.10
-
Air Joint QSY-14-6
The Festo QSY series is a high-quality pneumatic connector for maximum flexibility and quick installation. It has a convenient push-in type Y-joint type. Push-in coupling system convenient for compressed air and water. With a nominal size of 4.8 mm, the external hex type that can be assembled in any position is 360 °. Ambient temperature: -10 → 80 °C Container size is 10
1 products found
JPY: 29,800
USD: 185.42
-
Air Joint QSLV2-G38-8
Festo multi-distributor QSLV2-G3/8-8 folds in 2 and can be rotated 360 °. Internal hex and male screws for G3/8 connection are included. Typical sizes Nominal size: 4, 3 mm Threaded stud seal ring seal type Design Structure: Push/pull type Operating pressure Full temperature range: -0, 95-16 bar
1 products found
JPY: 4,770
USD: 29.68
-
Air Joint QSLV2-G12-12
The Festo multi-distributor QSLV2-G1/2-12 is folded in 2 and oriented at 360 °. Equipped with a hexagonal internal male screw with a G1/2 connection. Typical sizes Nominal dimensions: 6.4 mm Threaded stud seal ring seal type Design structure: Push/pull type Operating pressure Full temperature range: -0, 95-16 bar
1 products found
JPY: 5,790
USD: 36.03
-
Air Joint QSLV2-G38-12
Festo multi-distributor QSLV2-G3/8-12 folds in 2 and can be rotated 360 °. Internal hex and male screws for G3/8 connection are included. Typical sizes Nominal dimensions: 6.3 mm Threaded stud seal ring seal type Design structure: Push/pull type Operating pressure Full temperature range: -0, 95-16 bar
1 products found
JPY: 5,350
USD: 33.29
-
Air Joint Y Fitting QSY-G18-4
The FestoQSY series are high-quality pneumatic connectors for maximum flexibility and quick installation. It has a convenient push-in type Y-joint type. Push-in coupling system convenient for compressed air and water. With a nominal size of 3.1 mm, it is an external hex type 360° directional changeable that can be assembled in any position with 2 outputs. Ambient temperature: -10→80°C Container size is 10
1 products found
JPY: 23,800
USD: 148.08
-
Pneumatic Elbow Screw-to-Tube Adapter QSLV-G14-8-50
Festo push-in L-shaped fitting QSLV-G1/4-8-50 360 ° is turnable, with outer hex screws Size: Standard Nominal size =4, 9 mm Threaded stud seal Type: Sealing ring Assembly position: Any Container size: 50
1 products found
JPY: 71,200
USD: 443.01
-
Pneumatic Elbow Screw-to-Tube Adapter NPQM-LK-G18-Q4-P10
Standard size of Festo push-in L-shaped NPQM-LK-G18-Q4-P10 is nominal size 4 mm. Screw stud seal type: Sealing ring Design structure: Push/pull type Operating pressure Total temperature range: -0, 95-16 bar
1 products found
JPY: 18,700
USD: 116.35
-
Tubing Sleeve Cash Series 8 mm QSH-8-50
Festo shock absorbers are P-cushioned and do not have a fixed metal stop. Size is M12 and is attached with a lock nut. The stroke size is 1.2 mm. Uses high-alloy steel material No position detection
1 products found
JPY: 27,800
USD: 172.97
-
Half Union Type Air Joint Tube Screw QS-14-6-I-100
The Festo Push-in Fitting QS-1/4-6-I-100 has a container size of 100. Standard Size Nominal Size: 4,2 mm Screwed Stud Coating Seal Type Assembly Location Optional
1 products found
JPY: 61,800
USD: 384.52
-
Air Joint QSY-38-12
The Festo QSY series is a high-quality pneumatic connector for maximum flexibility and quick installation. It has a convenient push-in type Y-joint type. Push-in coupling system convenient for compressed air and water. Nominal size 8.4 mm, external hex that can be assembled in any position and supports 360 ° rotation. Ambient temperature: -10 → 80 °C Container size is 10
1 products found
JPY: 42,200
USD: 262.57
-
Pneumatic Elbow Screw-to-Tube Adapter QSW-14-10
Festo push-in fitting QSW-1/4-10 has hexagonal holes on the outsideMale Size: StandardNominal size: 8 mmThreaded stud seal Type: CoatingAssembly position: AnyContainer size: 10
1 products found
JPY: 22,300
USD: 138.75
-
Air Joint QSY-G14-8
The Festo QSY series is a high-quality pneumatic connector for maximum flexibility and quick installation. It has a convenient push-in type Y-joint type. Push-in coupling system convenient for compressed air and water. At 360 ° turnable, with a nominal size of 6.2 mm, it can be assembled with 2 outputs in any position. Ambient temperature: -10 → 80 °C Container size is 10
1 products found
JPY: 39,300
USD: 244.53
-
Air Joint QSYLV-G14-8
The Festo QSY series is a high-quality pneumatic connector for maximum flexibility and quick installation. It has a convenient push-in type Y-joint type. Push-in coupling system convenient for compressed air and water. With a nominal size of 4.7 mm, it is an external hex assembled in any position with 2 outputs, allowing 360 ° directional change. Ambient temperature: -10 → 80 °C Container size 1.
1 products found
JPY: 3,080
USD: 19.16
-
Half Union Air Joint Connector A: G 3/4 Tube Threaded QS-G34-22
Festo Push-in Fitting QS-G3/4-22 is Standard Size Nominal Size: 20 mm Threaded Stud Seal Ring Seal Type Assembly Location Optional
1 products found
JPY: 4,510
USD: 28.06
-
Pneumatic Elbow Screw-to-Tube Adapter QSML-M5-4-100
The Festo Push-in Type L Fitting QSML-M5 -4 -100 360 ° is a male thread with a changeable orientation and a hex socket on the outside. Size: MiniNominal size: 1, 7 mmScrew stud seal type: Ceiling ringAssembly position: AnyContainer size: 100
1 products found
JPY: 84,100
USD: 523.27
-
Pneumatic Elbow Screw-to-Tube Adapter QSW-38-10
The Festo push-in fitting QSW-3/8-10 has a male screw with a hex socket on the outside. Size: Standard Nominal size: 8, 3 mm, Threaded stud seal type: Coating Assembly position: Any Container size: 10
1 products found
JPY: 22,600
USD: 140.62
-
Air Joint NPQM-L-Q4-E-P10
The Festo NPQM series has a push-in L connector for easy, fast and simple push-pull installation. Useful for compressed air. The nominal size is 3 mm and the temperature range across the operating pressure is -0.95 to 16 bar. Ambient temperature: -20 → 70 °C
1 products found
JPY: 10,500
USD: 65.33
-
Pneumatic Elbow Screw-to-Tube Adapter QSW-12-12
The Festo push-in fitting QSW-1/2-12 has a male screw with a hex socket on the outside. Size: Standard Nominal size: 10, 3 mm Threaded stud seal type: Coating Assembly position: Any Container size: 1
1 products found
JPY: 3,260
USD: 20.28
-
Pneumatic Elbow Screw-to-Tube Adapter QSMLL-M5-3-100
The Festo push-in L-shaped fitting is long QSMLL-M5 -3 -100 360 ° with an outer hex on the 360 ° male thread that can be turned. Size: MiniNominal size: 1.5 mmThreaded stud seal Type: Ceiling ringAssembly position: AnyContainer size: 100
1 products found
JPY: 130,000
USD: 808.86
-
Pneumatic Elbow Screw-to-Tube Adapter QSMLL-G18-6
Festo push-in L-shaped fittings are long QSMLL-G1/8-6 360 ° with an outer hex on the 360 ° male thread that can be turned. Size: MiniNominal size: 3, 1 mmScrew stud seal type: Ceiling ringAssembly position: AnyContainer size: 10
1 products found
JPY: 17,500
USD: 108.89
-
Pneumatic Elbow Screw-to-Tube Adapter QSMLLV-M7-4-I
Festo push-in L-shaped fitting, long QSMLLV-M7-4-I 360 ° rotatable, internal hex external thread. Size: Mini Nominal size: 1, 9 mm Screw stud seal Type: Ceiling ring Assembly position: Any Container size: 10
1 products found
JPY: 25,500
USD: 158.66
-
Pneumatic Elbow Screw-to-Tube Adapter QSMLL-18-4
The Festo push-in L-shaped fitting is long QSMLL-1/8-4 360 ° with an outer hex on the 360 ° male thread that can be turned. Size: MiniNominal size: 2, 3 mmScrew stud seal type: CoatingAssembly position: AnyContainer size: 10
1 products found
JPY: 14,400
USD: 89.60
-
Pneumatic Elbow Screw-to-Tube Adapter NPQM-L-G18-Q4-P10
The Festo push-in L-shaped NPQM-L-G18-Q4T-P10 is a standard size with a nominal size of 3 mm. Screw stud seal type: Sealing ring Design structure: Push/pull type Operating pressure Total temperature range: -0, 95-16 bar
1 products found
JPY: 10,300
USD: 64.09
-
Air Joint QSYLV-38-10
The Festo QSY series is a high-quality pneumatic connector for maximum flexibility and quick installation. It has a convenient push-in type Y-joint type. Push-in coupling system convenient for compressed air and water. 5.7 mm nominal size, external hex assembled at any position, 360 ° redirectable. Ambient temperature: -10 → 80 °C Container size 1.
1 products found
JPY: 3,820
USD: 23.77
-
Pneumatic Elbow Screw-to-Tube Adapter NPQM-LK-G38-Q10-P10
Standard size of Festo push-in L-shaped NPQM-LK-G38 Q10 P10 is 7 mm. Screw stud seal type: Sealing ring Design structure: Push/pull type Operating pressure Total temperature range: -0, 95-16 bar
1 products found
JPY: 30,300
USD: 188.53
-
Pneumatic Elbow Screw-to-Tube Adapter NPQM-LK-G18-Q8-P10
The standard size of the Festo push-in L-shaped NPQM-LK-G18-Q8-P10 is a nominal size of 4 mm. Screw stud seal type: Sealing ring Design structure: Push/pull type Operating pressure Total temperature range: -0, 95-16 bar
1 products found
JPY: 20,600
USD: 128.17
-
Pneumatic Elbow Screw-to-Tube Adapter NPQH-L-M7-Q4-P10
Standard size of Festo push-in L fitting NPQH-L-M7-QQ 4-P 10 is nominal size: 3 mm. Screw stud seal type: Ceiling ring Assembly position: Any Container size: 10
1 products found
JPY: 16,000
USD: 99.55
-
Pneumatic Elbow Screw-to-Tube Adapter NPQM-L-G18-Q8-P10
The standard size of the Festo push-in L-shaped NPQM-L-G18-Q8-P10 is a nominal size of 5.5 mm. Screw stud seal type: Sealing ring Design structure: Push/pull type Operating pressure Total temperature range: -0, 95-16 bar
1 products found
JPY: 13,100
USD: 81.51
-
Air Joint QSLV6-G38-12
The Festo multi-distributor QSLV6-G3/8-12 is 6 folds and can be rotated 360 °. Internal hex and male screws for G3/8 connection are included. Typical sizes Nominal dimensions: 6.3 mm Threaded stud seal ring seal type Design structure: Push/pull type Operating pressure Full temperature range: -0, 95-16 bar
1 products found
JPY: 10,600
USD: 65.95
-
Pneumatic Elbow Screw-to-Tube Adapter QSW-14-6
The Festo push-in fitting QSW-1/4-6 has a male screw with a hex socket on the outside. Size: Standard Nominal size: 3, 3 mmScrew stud seal type: CoatingAssembly position: AnyContainer size: 10
1 products found
JPY: 14,800
USD: 92.09
-
Pneumatic Elbow Screw-to-Tube Adapter QSMLL-M7-6
Festo push-in L-shaped fitting long QSMLL-M7-6 360 ° with a turnable 360 ° male screw and external hex Size: miniNominal size: 2.4 mmThreaded stud seal type: Sealing ringAssembly position: AnyContainer size: 10
1種類の製品があります
JPY: 19,100
USD: 118.84
