[Legris]Fitting, Joint
Filters
-
Legris Pneumatic Straight Threaded-to-Tube Adapter, R 1/8 Male, Push In 8 mm 3175 08 10
Straight Adaptor - Male Taper Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. The 3175 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 3,870
USD: 24.28
-
Legris Pneumatic Straight Threaded-to-Tube Adapter, R 1/4 Male, Push In 8 mm 3175 08 13
Straight Adaptor - Male Taper Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. The 3175 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 3,980
USD: 24.97
-
Legris Pneumatic Straight Threaded-to-Tube Adapter, G 1/4 Male, Push In 8 mm 3101 08 13
Straight Adaptor - Male Parallel Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. The 3101 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 4,520
USD: 28.35
-
Legris Elbow Connector, G 1/4 Male, Push In 8 mm 3199 08 13
In the Thread Size column, R indicates taper thread and G indicates parallel thread. Stud Elbow Adaptor - Male Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 6,980
USD: 43.78
-
Legris 3106 Pneumatic Straight Tube-to-Tube Adapter, Push In 8 mm 3106 08 00
Tube-to-Tube Connector. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 4,440
USD: 27.85
-
Legris Pneumatic Bulkhead Tube-to-Tube Adapter Straight Push In 6 mm to Push In 6 mm 3816 06 00
Bulkhead Connector
1 products found
JPY: 8,400
USD: 52.69
-
Legris 7818 G 1/4 Female Pressure Decay Sensor, 3 → 8bar Pressure Range 7818 04 13
Pressure Decay Sensor. Produces a pneumatic end-of-stroke signal when the exhaust back pressure in the cylinder is no longer present. Used to detect end-of-travel of a cylinder Response time 3ms
1 products found
JPY: 12,300
USD: 77.16
-
Legris 3122 Pneumatic Straight Tube-to-Tube Adapter, Plug In 4 mm 3122 04 53
The "Tube Size" data quoted in the form "4mm (OD, plain end); 5mm (ID of tube to connect, barbed end)" relates to the Outside Diameter of the plain (non-barbed end) of the connector, and the Internal Diameter of tube that will push on to the barbed end of the connector on the other end. Further details are available through the manufacturers website: ; http://www.legris.com http://www.legris.com. Barbed Connector for Unequal Flexible Tube. Barbed Connectors enable flexible tube of different diameters to be connected together, using a simple push-in fitting.
1 products found
JPY: 3,240
USD: 20.32
-
Legris Elbow Connector, G 1/8 Male, Push In 4 mm 3199 04 10
In the Thread Size column, R indicates taper thread and G indicates parallel thread. Stud Elbow Adaptor - Male Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 4,840
USD: 30.36
-
Legris Elbow Connector, G 1/8 Male, Push In 8 mm 3199 08 10
In the Thread Size column, R indicates taper thread and G indicates parallel thread. Stud Elbow Adaptor - Male Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 5,950
USD: 37.32
-
Legris Pneumatic Straight Threaded-to-Tube Adapter, M5 x 0.8 Male, Push In 6 mm 3101 06 19
Straight Adaptor - Male Parallel Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. The 3101 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 4,270
USD: 26.79
-
Legris Pneumatic Straight Threaded-to-Tube Adapter, G 1/4 Male, Push In 6 mm 3101 06 13
Straight Adaptor - Male Parallel Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. The 3101 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 4,470
USD: 28.04
-
Legris Pneumatic Bulkhead Tube-to-Tube Adapter Straight Push In 6 mm to Push In 6 mm 3146 06 00
Bulkhead Adaptor - Compression-to-Tube
1 products found
JPY: 15,100
USD: 94.72
-
Legris Pneumatic Straight Threaded-to-Tube Adapter, G 1/4 Male, Push In 12 mm 3101 12 13
Straight Adaptor - Male Parallel Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. The 3101 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 3,320
USD: 20.83
-
Legris Pneumatic Bulkhead Tube-to-Tube Adapter Straight Push In 6 mm to Push In 6 mm 3116 06 00
Bulkhead Connector - Tube-to-Tube. Bulkhead connectors from Legris. These connectors are designed to connect two tubes through a panel to provide a seal. The bulkhead connectors are compact and have a sturdy design and are ideal for installation into your pneumatic fittings. Tube gripping is through the outside of the tube so there is no flow restriction.
1 products found
JPY: 9,180
USD: 57.58
-
［Discontinued］Legris Pneumatic Straight Threaded-to-Tube Adapter, G 1/8 Male, Push In 8 mm 3101 08 10
Straight Adaptor - Male Parallel Thread. A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. The 3101 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally. Features and Benefits. Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations
1 products found
JPY: 1,430
USD: 8.97
