[Lindstrom]Electronic/Electrical Parts and Controll Equipments
Filters
-
Lindstrom 135mm Cable Cutter For Copper Wire, 1.2mm cutting capacity RX8140
Micro Bevel Cutters. A range of precision cutters
1 products found
JPY: 14,500
USD: 90.89
-
Lindstrom 135mm Cable Cutter For Copper Wire, 1mm cutting capacity RX8142
Micro Bevel Cutters. A range of precision cutters
1 products found
JPY: 18,000
USD: 112.83
-
Lindstrom 110mm Cable Cutter For Copper Wire, 1mm cutting capacity 8142
Lindstrom Oval Head Ultra-Flush Diagonal Cutter. Professional Oval Head Diagonal Cutters from Lindstrom s popular 80 Series. Ideal for wire harness work or PCB board assembly. Ultra flush bevel for precision flat cuts on PCB and wire High performance Ball Bearing Steel for excellent strength Black oxidised finish for corrosion protection and minimal light reflection Machine ground edges for an accurate consistent edge angle Return spring for a smooth cut and increased cutting power Hardened cutting edges to 63 – 65HRC for a reliable cut
1 products found
JPY: 12,400
USD: 77.73
-
Lindstrom 109mm Cable Cutter For Copper Wire, 1mm cutting capacity 7191
Diagonal Side Cutters. Available in standard and flush cut versions Small head and jaw sizes allow for more intricate work but still maintain inherent strength Drop-forged tool steel frames Flush cutting edges identified by a circle on the handles
1 products found
JPY: 21,700
USD: 136.03
-
Lindstrom 5 piece Stainless Steel Tweezer Set With Various Contents 9855
General Purpose Set. Most commonly used tweezers Supplied in ESD wallet The tips always line up & meet perfectly All have polished edges hand crafted to perfect tip symmetry & balance All have two spot welds holding them together Satin finish good for reduction of glare Standard & surface mount tweezers are all SA type. (Stainless steel/Anti-acid/Anti-magnetic) Manufactured in Switzerland
1 products found
JPY: 21,100
USD: 132.26
-
Lindstrom 2 piece Stainless Steel Tweezer Set 9858
Lindstrom Popular Tweezer Set. Two most popular tweezers Supplied in an ESD wallet The tips always line up & meet perfectly All have polished edges hand crafted to perfect tip symmetry & balance All have two spot welds holding them together Satin finish good for reduction of glare Standard & surface mount tweezers are all SA type. (Stainless steel/Anti-acid/Anti-magnetic) Manufactured in Switzerland
1 products found
JPY: 8,180
USD: 51.28
-
Lindstrom 135mm Cable Cutter For Copper Wire, 1.2mm cutting capacity RX8141
Micro Bevel Cutters. A range of precision cutters
1 products found
JPY: 16,000
USD: 100.30
-
Lindstrom 138mm Cable Cutter For Copper Wire, 1.6mm cutting capacity RX8150
Micro Bevel Cutters. A range of precision cutters
1 products found
JPY: 17,000
USD: 106.56
-
Lindstrom ESD 146.5 mm Ball Bearing Steel Flat Nose Pliers With 20mm Jaw RX7490
Lindstrom Pliers. Precision-manufactured electronic pliers. Produced from high performance ball-bearing steel, with precision screw joint and lap-joint construction Adjustable spring positioning up to 3 positions allows operator to adjust the tool width and spring tension to suit individual hand sizes and strengths, as well as user preferences BS EN 61340-5-1
1 products found
JPY: 27,900
USD: 174.89
-
Lindstrom 146.5 mm Ball Bearing Steel Round Nose Pliers, Jaw Length: 20mm RX7590
Lindstrom Pliers. Precision-manufactured electronic pliers. Produced from high performance ball-bearing steel, with precision screw joint and lap-joint construction Adjustable spring positioning up to 3 positions allows operator to adjust the tool width and spring tension to suit individual hand sizes and strengths, as well as user preferences BS EN 61340-5-1
1 products found
JPY: 14,600
USD: 91.52
-
Lindstrom 158.5 mm Ball Bearing Steel Long Nose Pliers With 32mm Jaw Length RX7891
Lindstrom Pliers. Precision-manufactured electronic pliers. Produced from high performance ball-bearing steel, with precision screw joint and lap-joint construction Adjustable spring positioning up to 3 positions allows operator to adjust the tool width and spring tension to suit individual hand sizes and strengths, as well as user preferences BS EN 61340-5-1
1 products found
JPY: 14,200
USD: 89.01
-
Lindstrom 155.5 mm Ball Bearing Steel Long Nose Pliers With 29mm Jaw Length RX7892
Lindstrom Pliers. Precision-manufactured electronic pliers. Produced from high performance ball-bearing steel, with precision screw joint and lap-joint construction Adjustable spring positioning up to 3 positions allows operator to adjust the tool width and spring tension to suit individual hand sizes and strengths, as well as user preferences BS EN 61340-5-1
1 products found
JPY: 17,100
USD: 107.19
-
Lindstrom ESD 146.5 mm Ball Bearing Steel Flat Nose Pliers With 20mm Jaw RX7893
Lindstrom Pliers. Precision-manufactured electronic pliers. Produced from high performance ball-bearing steel, with precision screw joint and lap-joint construction Adjustable spring positioning up to 3 positions allows operator to adjust the tool width and spring tension to suit individual hand sizes and strengths, as well as user preferences BS EN 61340-5-1
1 products found
JPY: 15,800
USD: 99.04
-
Lindstrom Plier Torsion Spring RX01
Lindstrom Pliers
Precision-manufactured electronic pliers1 products found
JPY: 1,350
USD: 8.46
-
Lindstrom 110mm Cable Cutter For Copper Wire, 1.2mm cutting capacity 8211
Oblique Cutter 20°. Ideal for cutting DIP leads from rear, small cutting head, also makes this tool suitable for cutting pins on dense PCBs Flush cut
1 products found
JPY: 35,700
USD: 223.78
-
Lindstrom 109mm Cable Cutter For Copper Wire, 1mm cutting capacity 7190
Diagonal Side Cutters. Available in standard and flush cut versions Small head and jaw sizes allow for more intricate work but still maintain inherent strength Drop-forged tool steel frames Flush cutting edges identified by a circle on the handles
1 products found
JPY: 22,200
USD: 139.16
-
Lindstrom 110mm Cable Cutter For Copper Wire, 1mm cutting capacity 8146
Tapered & Relieved Head. Ideal for use in confined spaces and for rework
1 products found
JPY: 21,000
USD: 131.64
-
Lindstrom 110mm Cable Cutter For Copper Wire, 1mm cutting capacity 8147
Tapered & Relieved Head. Ideal for use in confined spaces and for rework
1 products found
JPY: 14,100
USD: 88.39
-
Lindstrom 110mm Cable Cutter For Copper Wire, 0.8mm cutting capacity 8148
Tapered & Relieved Head. Ideal for use in confined spaces and for rework
1 products found
JPY: 23,800
USD: 149.19
-
Lindstrom 125mm Cable Cutter For Copper Wire, 2mm cutting capacity 8161
Oval Head Flush. Clean cut in intensive use
1 products found
JPY: 23,800
USD: 149.19
-
Lindstrom 117mm Cable Cutter For Copper Wire, 0.8mm cutting capacity 8248
Oblique Cutter 45°. Ideal for reaching between wires or parts normally difficult to access Flush cut Precision screw joint
1 products found
JPY: 20,800
USD: 130.38
-
Lindstrom 147mm Cable Cutter For Copper Wire, 2mm cutting capacity RX8161
Standard Cutters. 3 styles: Micro-Bevel, Flush and Ultra-Flush
1 products found
JPY: 19,600
USD: 122.86
-
Lindstrom 147mm Cable Cutter For Copper Wire, 1.6mm cutting capacity RX8162
Standard Cutters. 3 styles: Micro-Bevel, Flush and Ultra-Flush
1 products found
JPY: 21,400
USD: 134.14
-
Lindstrom 1/4 in Hex Adjustable Torque Screwdriver, 10 → 80Ncm MA500-1A
These Drivers must be pre-set using a suitable Torque Analyser, but are adjustable independently on the window scale. However where a calibrated value is required we suggest the use of the torque calibration analyser. Micro Adjustable Torque Screwdrivers. Micro-adjustable torque screwdriver Window scale and precise, positive locking, pullout adjustment knob Stainless steel 1/4" hexagon driver for all standard drive bits Spring-loaded high -security bit holder for convenience and safety Model MA500-1 Works in a clockwise direction only
1 products found
JPY: 95,400
USD: 598.01
-
Lindstrom 120 mm, Anti-Magnetic Stainless Steel, Fine; Rounded, ESD Anti-Acid Tweezers TL SM115-SA
Surface Mount Precision Tweezers. Anti-acid and anti-magnetic stainless steel tweezer set designed for surface-mount applications and fine wire cutting and handling. All tips and edges are very fine and rounded to reduce scratching on the component board ESD safe for secure use in electronics assembly High quality Swiss workmanship
1 products found
JPY: 15,000
USD: 94.03
-
Lindstrom 125mm Cable Cutter For Copper Wire, 1.6mm cutting capacity 8162
Lindstrom Oval Head Ultra-Flush Diagonal Cutter. Professional Oval Head Diagonal Cutters from Lindstrom s popular 80 Series. Ideal for wire harness work or PCB board assembly. Ultra flush bevel for precision flat cuts on PCB and wire High performance Ball Bearing Steel for excellent strength Black oxidised finish for corrosion protection and minimal light reflection Machine ground edges for an accurate consistent edge angle Return spring for a smooth cut and increased cutting power Hardened cutting edges to 63 – 65HRC for a reliable cut
1 products found
JPY: 16,100
USD: 100.92
-
Lindstrom 108mm Cable Cutter For Copper Wire, 1mm cutting capacity 8130
Small Head Cutter. Extra small head profile Sharp edge with bevel cut
1 products found
JPY: 13,800
USD: 86.50
-
Lindstrom 2 piece Stainless Steel Tweezer Set Yes 9859
General Purpose 2-Piece Set. One serrated gripped tweezer with rounded tips SA-ESD safe Supplied in ESD safe wallet The tips always line up & meet perfectly All have polished edges hand crafted to perfect tip symmetry & balance All have two spot welds holding them together Satin finish good for reduction of glare Standard & surface mount tweezers are all SA type. (Stainles ssteel/Anti-acid/Anti-magnetic) Manufactured in Switzerland
1 products found
JPY: 29,900
USD: 187.43
-
Lindstrom 8 Piece Electronics Pouch Tool Kit 9848
Professional Electronic Tool Kit. A kit with a carefully selected range of high quality tools for the electronics engineer.
1 products found
JPY: 48,600
USD: 304.65
-
Lindstrom 160mm Cable Cutter P6160
Diagonal Cutters. Special ground cutting edges give much cleaner flush cut Cutting edges hardened to 62-64 HRC Flush cutting - no bevel Suitable for plastic sprues, cable ties, PCB component leads, three-core cable and copper wire Relieved jaws for better accessibility into confined spaces Lacquered finish to jaws protects against rust
1 products found
JPY: 25,200
USD: 157.96
-
Lindstrom 205mm Cable Cutter, 2.5mm cutting capacity TRX8180
Heavy Duty Cutters. Special ground cutting edges give much cleaner flush cut Cutting edges hardened to 62-64 HRC High leverage joint to increase cutting forces Suitable for plastic sprues, cable ties, PCB component leads, three-core cable and copper wire Relieved jaws for better accessibility into confined spaces Lacquered finish to jaws protects against rust
1 products found
JPY: 18,000
USD: 112.83
-
Lindstrom 120 mm, Anti-Magnetic Stainless Steel, Fine; Rounded, ESD Anti-Acid Tweezers TL SM108-SA
Surface Mount Precision Tweezers. Anti-acid and anti-magnetic stainless steel tweezer set designed for surface-mount applications and fine wire cutting and handling. All tips and edges are very fine and rounded to reduce scratching on the component board ESD safe for secure use in electronics assembly High quality Swiss workmanship
1 products found
JPY: 15,000
USD: 94.03
-
Lindstrom 120 mm, Anti-Magnetic Stainless Steel, Fine; Rounded, ESD Anti-Acid Tweezers TL SM105-SA
Surface Mount Precision Tweezers. Anti-acid and anti-magnetic stainless steel tweezer set designed for surface-mount applications and fine wire cutting and handling. All tips and edges are very fine and rounded to reduce scratching on the component board ESD safe for secure use in electronics assembly High quality Swiss workmanship
1 products found
JPY: 15,000
USD: 94.03
-
Lindstrom 120 mm, Anti-Magnetic Stainless Steel, Fine; Rounded, ESD Anti-Acid Tweezers TL SM111-SA
Surface Mount Precision Tweezers. Anti-acid and anti-magnetic stainless steel tweezer set designed for surface-mount applications and fine wire cutting and handling. All tips and edges are very fine and rounded to reduce scratching on the component board ESD safe for secure use in electronics assembly High quality Swiss workmanship
1 products found
JPY: 15,000
USD: 94.03
-
Lindstrom 120 mm, Anti-Magnetic Stainless Steel, Fine; Rounded, ESD Anti-Acid Tweezers TL SM104-SA
Surface Mount Precision Tweezers. Anti-acid and anti-magnetic stainless steel tweezer set designed for surface-mount applications and fine wire cutting and handling. All tips and edges are very fine and rounded to reduce scratching on the component board ESD safe for secure use in electronics assembly High quality Swiss workmanship
1 products found
JPY: 8,360
USD: 52.40
-
Lindstrom 115 mm, Anti-Magnetic Stainless Steel, Fine; Rounded, ESD Anti-Acid Tweezers TL SM103-SA
Surface Mount Precision Tweezers. Anti-acid and anti-magnetic stainless steel tweezer set designed for surface-mount applications and fine wire cutting and handling. All tips and edges are very fine and rounded to reduce scratching on the component board ESD safe for secure use in electronics assembly High quality Swiss workmanship
1 products found
JPY: 15,000
USD: 94.03
-
Lindstrom 120 mm, Anti-Magnetic Stainless Steel, Fine; Rounded, ESD Anti-Acid Tweezers TL SM110-SA
Surface Mount Precision Tweezers. Anti-acid and anti-magnetic stainless steel tweezer set designed for surface-mount applications and fine wire cutting and handling. All tips and edges are very fine and rounded to reduce scratching on the component board ESD safe for secure use in electronics assembly High quality Swiss workmanship
1 products found
JPY: 15,000
USD: 94.03
-
Lindstrom 147mm Cable Cutter For Copper Wire, 2mm cutting capacity RX8160
Standard Cutters. 3 styles: Micro-Bevel, Flush and Ultra-Flush
1 products found
JPY: 16,200
USD: 101.55
-
Lindstrom 108mm Cable Cutter For Copper Wire, 0.8mm cutting capacity 8132
Lindstrom Oval Head Ultra-Flush Diagonal Cutter. Professional Oval Head Diagonal Cutters from Lindstrom s popular 80 Series. Ideal for wire harness work or PCB board assembly. Ultra flush bevel for precision flat cuts on PCB and wire High performance Ball Bearing Steel for excellent strength Black oxidised finish for corrosion protection and minimal light reflection Machine ground edges for an accurate consistent edge angle Return spring for a smooth cut and increased cutting power Hardened cutting edges to 63 – 65HRC for a reliable cut
1 products found
JPY: 23,200
USD: 145.43
-
Lindstrom 112mm Cable Cutter For Copper Wire, 1.6mm cutting capacity 8151
Oval Head Flush. Clean cut in intensive use
1 products found
JPY: 20,000
USD: 125.37
