Pico Technology

PicoScope 2000 Series PC Oscilloscope 4Ch 100 MHz　PicoScope 2408B

It is the latest compact and lightweight alternative to benchtop devices.

Pico Technology

PicoScope 2000 Series PC Oscilloscope 2Ch 50 MHz　PicoScope 2206B

Compact, lightweight, state-of-the-art alternative to benchtop devices. Provides benchtop performance and a simple, low-cost solution in a pocket-sized scope.

Pico Technology

PicoScope 2000 Series PC Oscilloscope 2Ch 100 MHz　PicoScope 2208B

Compact, lightweight, state-of-the-art alternative to benchtop devices. Provides benchtop performance and a simple, low-cost solution in a pocket-sized scope.

Pico Technology

PicoScope 2000 Series PC Oscilloscope 4Ch 25 MHz　PicoScope 2405A

Compact, lightweight, state-of-the-art alternative to benchtop devices. Provides benchtop performance and a simple, low-cost solution in a pocket-sized scope.

Pico Technology

PicoScope 2000 Series PC Oscilloscope 4Ch 50 MHz　PicoScope 2406B

Compact, lightweight, state-of-the-art alternative to benchtop devices. Provides benchtop performance and a simple, low-cost solution in a pocket-sized scope.

Pico Technology

PicoScope 2000 Series PC Oscilloscope 4Ch 70 MHz　PicoScope 2407B

Compact, lightweight, state-of-the-art alternative to benchtop devices. Provides benchtop performance and a simple, low-cost solution in a pocket-sized scope.

Pico Technology

pico Technology PicoLog 1216 Voltage Data Logger, Maximum Voltage Measurement 2.5V, USB 2.0, Mains Powered　PP549

Terminal board for custom front-end circuitry, USB 2.0 lead, PicoLog and PicoScope software and software development kit. PicoLog 1000 Series Multichannel Voltage Data Loggers. Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 series multichannel voltage data loggers include everything needed for immediate use with a full suite of software including the ready to go PicoLog data logging package, the PicoScope oscilloscope package and an software development kit for writing user programs. Unipolar analogue input channels Independent software-configurable channels, ranges, scaling and control outputs up to 4 software configurable digital output lines 3 sampling modes to meet most data logging needs: REAL-TIME continuous provides averaged, time-accurate readings with automatic measurements, STREAMING allows channel voltage readings to be logged continuously at 1 kS/s on any number of channels BLOCK MODE captures at the full 1 MS/s sample rate of the logger for the duration of the 8k sample buffer. Up to 1 MS/s sample rate USB connected and powered Software and pin-compatible with Pico USB ADC-11 Works with Windows XP and Vista (32 and 64-bit) Software development kit Includes Application Programming Interface (API) and examples for C/C++/C#, VB, LabVIEW VIs

Pico Technology

Pico Technology PT-104 Resistance, Temperature, Voltage Data Logger, Maximum Voltage Measurement 2.5 V, 115 mV,　PT-104

PT-104 4 Channel RTD Data Logger for PC. The Pt-104 measures temperature from up to 4 Pt-100 or Pt-1000 temperature sensors. The Pt-104's accuracy of 0.01°C and resolution of 0.001°C, over the -200°C to +800°C temperature range, makes the Pt-104 ideal for scientific and industrial applications. 4-channel data acquisition unit Measures temperature, resistance and voltage For use with 2, 3, and 4 wire PT100 and PT1000 sensors High resolution and accuracy Connects to a PC serial RS232 or USB port (converter supplier) No power supply required. Supplied with PicoLog data acquisition software for 32-bit editions of Windows XP (SP2) and Vista ; a software development kit is supplied containing a range of software drivers and example code to help develop bespoke software. Support Sensors. A range of Pico PT100 probes are available separately to interface direct to the PT-104

Pico Technology

Pico Technology PicoLog CM3 Current, Voltage Data Logger, Maximum Voltage Measurement 1V ac, Maximum Current　PP803

3 AC current clamps and all necessary software. PicoLog CM3 ® Current Data Logger. The new PicoLog CM3 USB/Ethernet Current Data Logger is a compact, easy-to-use instrument for measuring the power consumption of buildings and machinery. With three channels, high accuracy and low noise, it is ideal for recording data from three-phase AC supplies. Up to 1 second per conversion Multiple units can be run on a single PC Supplied clamps enable recording of 3 signals Option of power over Ethernet or USB Wide current range covering 0 to 300A Dual USB/Ethernet interface ensures problem-free installation

Pico Technology

pico Technology PicoScope 2000 Series 2204A Oscilloscope, PC Based, 2 Channels, 10MHz　PICOSCOPE 2204A

It is the latest compact and lightweight alternative to benchtop devices.
A pocket-sized scope provides benchtop performance and a simple, low-cost solution.

Pico Technology

pico Technology PicoScope 2000 Series 2205A Oscilloscope, PC Based, 2 Channels, 25MHz　PICOSCOPE 2205A

It is the latest compact and lightweight alternative to benchtop devices.
A pocket-sized scope provides benchtop performance and a simple, low-cost solution.

Pico Technology

Pico Technology PicoScope 3000 Series PicoScope 3204D MSO Oscilloscope, PC Based, 2 Channels, 70MHz　PicoScope 3204D MSO

Connected via USB, the small PicoScope 3000D series is a fully portable test system.
The logic analyzer function enables protocol analysis.

Pico Technology

pico Technology PicoScope 3000 Series PicoScope 3206D MSO Oscilloscope, PC Based, 2 Channels, 200MHz　PicoScope 3206D MSO

Connected via USB, the small PicoScope 3000D series is a fully portable test system.
The logic analyzer function enables protocol analysis.

Pico Technology

Pico Technology PicoScope 3000 Series 3205D Oscilloscope, PC Based, 2 Channels, 100MHz　PicoScope 3205D

Connected via USB, the small PicoScope 3000D series is a fully portable test system.
The logic analyzer function enables protocol analysis.

Pico Technology

Pico Technology PicoScope 3000 Series 3206D Oscilloscope, PC Based, 2 Channels, 200MHz　PIcoScope 3206D

Connected via USB, the small PicoScope 3000D series is a fully portable test system.
The logic analyzer function enables protocol analysis.

Pico Technology

Pico Technology Oscilloscope Probe, Probe Type: Active, Differential 100MHz 700V 1:10, 1:100　TA043

Pico 100MHz 700V Differential Probe TA043, 10:1/100:1. Pico TA043 is an active differential probe suitable for high common-mode voltage measurement applications up to ±700V (DC + peak AC). It is capable of acquiring higher speed signals of up to 100MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low speed balanced differential signals found in serial communications buses. Bandwidth DC to 100MHz (–3 dB) Attenuation 10:1/100:1 Rise time 3.5ns Accuracy ±2% Input impedance 4MΩ ll 7pF each side to ground Input voltage differential range (10:1) ±70V (DC + peak AC) or 70VRMS Input voltage differential range (100:1) ±700V (DC + peak AC) or 500VRMS Common mode range ±700V (DC + peak AC) or 500VRMS (10:1 and 100:1) Absolute maximum voltage (differential or common mode) 1000VRMS CAT III (10;1 & 100:1) Swing (into 50 kΩ load) ±7V Offset (typical) <±5mV Noise (typical) 0.9mVRMS Source impedance (typical) 50Ω CMRR (typical) 85dB @ 50Hz; 55dB @ 1MHz Ambient operating temperature -10 to +40°C Ambient storage temperature -30 to +70°C Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptor Length of input leads 30cm Length of BNC lead 90cm Weight 500g Dimensions 202 x 83 x 38 mm

Pico Technology

Pico Technology Oscilloscope Probe, Probe Type: Active, Differential 70MHz 5kV 1:100, 1:1000　TA044

Pico 70MHz 7000V Differential Probe TA044, 100:1/1000:1. Pico TA044 is an active differential probe suitable for high common-mode voltage measurement applications up to ±7000 V (DC + peak AC). This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses. Bandwidth DC to 70MHz (–3 dB) Attenuation ratio 100:1/1000:1 Accuracy ±2% Input impedance 10MΩ ll10pF each side to ground Differential range (100:1) ±700V (DC + peak AC) or 700VRMS Maximum differential (1000:1) ±7000V (DC + peak AC) or 5000VRMS Common mode range ±7000V (DC + peak AC) or 2500VRMS (100:1 & 1000:1) Absolute maximum voltage (common mode) ±7000V (DC + peak AC) or 2500VRMS (100:1 & 1000:1) Absolute maximum voltage (differential mode) ±7000V (DC + peak AC) or 5000VRMS (100:1 & 1000:1) Swing ±7V into 50kΩ load Offset (typical) <±5mV Noise (typical) 0.9mVRMS Source impedance (typical) 50Ω CMRR (typical) 80dB @ 6Hz; 50dB @ 1MHz Ambient operating temperature -10 to +40 °C Ambient storage temperature -30 to +70°C Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptor Length of input leads 60cm Length of BNC lead 90cm Weight 500g Dimensions 202 x 83 x 38 mm

Pico Technology

Pico Technology TA047 Oscilloscope Probe Battery　TA047

Pico Battery Pack TA047 for Active Differential Probes. Pico TA047 is a battery pack which accepts 4 alkaline AA / LR6 batteries for supplying 6 V power to TA045 ( < 898-6753') 898-6753/ ) and TA058 ( < 898-6769') 898-6769/ ) active differential probes.

Pico Technology

Pico Technology TA051 Attenuator, For Use With 50Ω Signal Oscilloscope　TA051

Pico Terminator TA051, BNC Feedthrough 50R 1W 1GHz. The Pico TA051 feed-through attenuator is a coaxial terminator with BNC connectors. It is useful for connecting signals from 50Ω sources into instruments with 1 MΩ impedance inputs, such as oscilloscopes. Bandwidth DC to 1GHz Maximum power dissipation 1W Input impedance 50Ω Resistance tolerance ±2% Dimensions 56 x 20 x 17 mm (approximately 2.2 x 0.8 x 0.7 in) Connectors BNC, 1 male + 1 female Construction shielded inner box with plastic shell Weight 24 g (approximately 0.85 oz) each

Pico Technology

Pico Technology Hard Carrying Case, For Use With PicoScope 3000D (including MSO), PicoScope 3400A/B Series, PicoScope　PP969

Pico Hard Carry Case PP969, Medium. Pico PP969 is a hard carry case with foam cut-out designed to fit the new generation of portable PicoScope oscillscopes. PicoScope models compatible with this case are: PicoScope 3000D (including MSO); PicoScope 3400A/B Series; PicoScope 4824 8-channel oscilloscope; PicoScope 5x4x flexible resolution oscilloscopes.

Pico Technology

Pico Technology TA189 Oscilloscope Probe, For Use With Data Loggers, Oscilloscope　TA189

Pico 30A Precision Current Probe TA189. Pico TA189 30A high-precision current probe is for applications requiring non-intrusive current measurement, using closed-loop Hall effect technology to measure both AC and DC current with high stability over long periods of time. It is particularly well-suited for current leakage monitoring and battery discharge testing. It can be used in conjunction with an active differential voltage probe such as TA041 ( < 898-6744') 898-6744/ ) for power quality analysis.

Pico Technology

Pico Technology TA167 Current Probe　TA167

EN61010-1:2001; EN61010-2-032:2002; EN61010-031:2002; 300 V CAT III, Pollution Degree 2. Pico 200A / 2000A AC/DC Current Probe TA167, BNC Connector. Pico TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000A.

Pico Technology

Pico Technology TA102 Probe Holder, For Use With All Types of Passive Probes　TA102

Pico Two Footed Probe Positioner TA102. The Pico two-footed oscilloscope probe positioner offers hands-free probing in a safe position against the device under test for all types of passive probes. Hands-free testing Exact and safe positioning Tapered opening for different probe shapes

Pico Technology

［Discontinued］PicoScope 3000 Series PC Oscilloscope 2Ch 50 MHz and others

Pico Technology

［Discontinued］PicoScope 2000 Series PC Oscilloscope 2Ch 70 MHz　PicoScope 2207B

Compact, lightweight, state-of-the-art alternative to benchtop devices. Provides benchtop performance and a simple, low-cost solution in a pocket-sized scope.

Pico Technology

［Discontinued］Pico Technology PP706 Digital I/O, Light, pH, Pulse, Resistance, Sound Data Logger, Maximum Voltage Measurement 5V, USB　PP706

USB DrDAQ Data Logger Board Software CD USB Installation Guide Cable: USB2 1.8m blue. USB DrDAQ® Data Logger - PP706. The USB DrDAQ Data Logger PP706 has something for everyone: whether you re a teacher looking for a fun way to perform data logging experiments in the classroom, a student wanting an inexpensive introduction to data logging and oscilloscopes, a computer programmer who wants to use C++ to monitor and control inputs and outputs of real-world devices, a hobbyist who wants to monitor and control their environment, or a professional wanting to measure pH under laboratory conditions — DrDAQ is all you need! Built-in sensors for light, sound and temperature allow you to start using your USB DrDAQ Data Logger straight out of the box. The USB DrDAQ also has an RGB LED that you can program to show any 1 of 16.7 million colours. A PC based data logger is only as good as its software and the USB DrDAQ comes with a complete software package that enables you not only to use your DrDAQ as a data logger (PicoLog) but also as an oscilloscope and AWG (arbitrary waveform generator) using PicoScope. Both PicoLog and PicoScope are easy to use applications. Please see RS < 749-1917') 749-1917/ for a full DrDAQ kit containing not just the logger, but additional sensors for pH, temperature, humidity and a scope probe. Very low cost Built in sensors for light, temperature and sound (level and waveforms) Measure pH — just plug in any standard pH electrode Measure voltages and resistances Sockets for external sensors (temperature, humidity etc) Use DrDAQ to capture fast signals (eg sound waveforms) Outputs for control experiments Simply plug in to your PC and measure Includes SDK for writing custom applications USB connected and powered Use up to 20 USB DrDAQs on a single PC

Pico Technology

［Discontinued］pico Technology PP707 Digital I/O, Humidity, Light, pH, Pulse, Resistance, Sound, Temperature Data Logger, Maximum　PP707

USB DrDAQ data logger board pH electrode Dr DAQ 2metre temperature sensors DrDAQ humidity sensor Software CD USB Installation Guide 3m sensor extension cable Scope probe x1 / x10 switchable USB2 cable, 1.8 metre, blue. USB DrDAQ® 2011 Data Logging Kit - PP707. While the USB DrDAQ DrDAQ data logger unit (RS < 749-1914') 749-1914 comes with many built-in sensors, the USB DrDAQ Data Logging Kit PP707 (RS < 749-1917') 749-1917 contains additional sensors and probes to enable many other measurments to be taken, therefore allowing further experiments to take place immediately.

Pico Technology

［Discontinued］Pico Technology PicoScope 3000 Series PicoScope 3205D MSO Oscilloscope, PC Based, 2 Channels, 100MHz　PicoScope 3205D MSO

The compact PicoScope 3000 D series connected via USB is a complete portable test system.
Equipped with logic analyzer function for protocol analysis.

Pico Technology

［Discontinued］Pico Technology PicoScope 3000 Series 3203D Oscilloscope, PC Based, 2 Channels, 50MHz　PicoScope 3203D MSO

Connected via USB, the small PicoScope 3000D series is a fully portable test system.
The logic analyzer function enables protocol analysis.

Pico Technology

［Discontinued］Pico Technology Oscilloscope Probe, Probe Type: Active, Differential 100MHz 1kV 1:100, 1:1000　TA042

Pico 100MHz 1400V Differential Probe TA042,100:1/1000:1. Pico TA042 is an active differential probe suitable for high common-mode voltage measurement applications up to ±1400V (DC + peak AC). It is capable of acquiring higher speed signals of up to 100MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low speed balanced differential signals found in serial communications buses. Bandwidth DC to 100MHz (–3 dB) Attenuation 100:1/1000:1 Rise time 3.5ns Accuracy ±2% Input impedance 4MΩ ll 7pF each side to ground Maximum differential voltage input (100:1) ±140V (DC + peak AC) or 140VRMS Max differential voltage input (1000:1) ±1400V (DC + peak AC) or 1000VRMS Common mode range ±1400V (DC + peak AC) or 1000VRMS (100:1 and 1000:1) Absolute maximum voltage (differential or common mode) ±1400V (DC + peak AC) or 1000VRMS CAT III (1/100 & 1/1000) Swing (into 50 kΩ load) ±7V Offset (typical) <±5mV Noise (typical) 0.9mVRMS Source impedance (typical) 50Ω CMRR (typical) 80dB @ 60Hz; 50dB @ 1MHz Ambient operating temperature -10 to +40°C Ambient storage temperature -30 to +70°C Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptor Length of input leads 30cm Length of BNC lead 90cm Weight 500g Dimensions 207 x 83 x 38 mm

Pico Technology

［Discontinued］Pico Technology TA009 Current Probe　TA009

Pico 60 A AC/DC Current Probe TA009, 4 mm (Banana) Plug Connector. Pico TA009 current probe can measure currents from 10mA up to 60A with a switch selectable high and low range. When measuring DC current, a simple push button is included for zero adjustment. This current probe is equipped with 4 mm connectors compatible with multimeters. Input ranges (DC): Low (1mV/10mA) 10mA to 20A; High (1mV/100mA): 100mA to 60A Input ranges (AC RMS): Low (1mV/10mA) 10mA to 20A; High (1mV/100mA) 100mA to 60A AC frequency range up to 20kHz Maximum conductor size 9mm Output connectors 4 mm banana plugs Operating environment 0 to +50 °C, 70% RH Battery type 9 V DC NEDA 1604, 6F22, 006P Battery life 100 hours typical with alkaline Dimensions 195 x 70 x 33 mm

Pico Technology

［Discontinued］Pico Technology TA018 Current Probe　TA018

Pico 60 A AC/DC Current Probe TA018, BNC Connector. Pico TA018 current probe can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. Input ranges (DC): Low (1mV/10mA) 10mA to 20A; High (1mV/100mA) 100mA to 60A Input ranges (AC RMS): Low (1mV/10mA) 10mA to 20A; High (1mV/100mA): 100mA to 60A AC frequency range up to 20kHz Maximum conductor size 9mm Output connectors BNC Operating environment 0 to +50 °C, 70% RH Dimensions 195 x 70 x 33 mm Battery type 9 V DC NEDA 1604, 6F22, 006P Battery life 100 hours typical with alkaline