[OKW]Electronic/Electrical Parts and Controll Equipments
Filters
-
OKW, ABS, Handheld Enclosure With Integral Battery Compartment, IP40 ,96 mm x 24 mm x 47 mm A9066117+A9166001
Remote Control. ABS Pocket cases with ergonomic profiles Size XS (see cases with a height of 20mm) with key ring, PCB mountable inside Size M and L (see cases with a height of 24mm and H32mm) with recess for membrane keypad Battery connectors are supplied for AAA and AA batteries, PP3 battery requires a separate connection clip (stock no. ; 279-5457 279-5457 )
1 products found
JPY: 5,360
USD: 33.60
-
OKW, ABS, Handheld Enclosure With Integral Battery Compartment, IP40 ,140 mm x 31 mm x 63 mm A9067109+A9190002
Remote Control. ABS Pocket cases with ergonomic profiles Size XS (see cases with a height of 20mm) with key ring, PCB mountable inside Size M and L (see cases with a height of 24mm and H32mm) with recess for membrane keypad Battery connectors are supplied for AAA and AA batteries, PP3 battery requires a separate connection clip (stock no. ; 279-5457 279-5457 )
1 products found
JPY: 8,930
USD: 55.98
-
OKW Belt Clip for use with Smart-Case A9167019
Remote Control with Cable Gland. Pocket cases with ergonomic profiles Recess for membrane keypad Battery connectors are supplied for AAA and AA batteries, PP3 battery requires a separate connection clip (stock no. ; 279-5457 279-5457 ) Pre-fitted for a control lead
1 products found
JPY: 1,380
USD: 8.65
-
OKW, ABS, Handheld Enclosure With Integral Battery Compartment ,140 mm x 30.5 mm x 62.7 mm A9067127
Remote Control with Cable Gland. Pocket cases with ergonomic profiles Recess for membrane keypad Battery connectors are supplied for AAA and AA batteries, PP3 battery requires a separate connection clip (stock no. ; 279-5457 279-5457 ) Pre-fitted for a control lead
1 products found
JPY: 9,410
USD: 58.99
-
OKW DATEC, Sloped Front, ABS, 130 x 180 x 86mm Desktop Enclosure, Grey, White B4013117+B4113106
Terminal Case. Ergonomic 2-part case for desktop use or wall-mounting Bases contain a variety of PCB mounting bosses Front panel secured by self tapping countersunk screws Gasket provides protection to IP54
1 products found
JPY: 17,400
USD: 109.07
-
OKW DATEC, Sloped Front, ABS, 264 x 180 x 86mm Desktop Enclosure, Grey, White B4026117+B4126106
Terminal Case. Ergonomic 2-part case for desktop use or wall-mounting Bases contain a variety of PCB mounting bosses Front panel secured by self tapping countersunk screws Gasket provides protection to IP54
1 products found
JPY: 25,400
USD: 159.22
-
OKW Feet for use with Mettec Case A9257205
Mettec ABS Case Feet. These replace the standard feet supplied with each case Case feet kit comprises 4 mouldings, 4 screws, 4 non-slip inserts and 2 tilt feet
1 products found
JPY: 3,280
USD: 20.56
-
OKW Feet for use with Mettec Case A9257207
Mettec ABS Case Feet. These replace the standard feet supplied with each case Case feet kit comprises 4 mouldings, 4 screws, 4 non-slip inserts and 2 tilt feet
1 products found
JPY: 3,140
USD: 19.68
-
OKW Feet for use with Mettec Case A9257209
Mettec ABS Case Feet. These replace the standard feet supplied with each case Case feet kit comprises 4 mouldings, 4 screws, 4 non-slip inserts and 2 tilt feet
1 products found
JPY: 3,280
USD: 20.56
-
ABS Project Box, White, 290 x 200 x 74mm B2211007+ 2 X B2129307
Stock nos. 338-1087 and 338-1065 are supplied with a 74mm high case. Included are 2 large size end panels and a side panel kit, thus increasing the case height to 124mm. Meditec Cases. Ergonomic desk cases, including front and rear panels Internal screw pillars for mounting Eurocards from 100mm x 160mm to 233.4mm x 220mm Supplied with 4 moulded non-slip feet
1 products found
JPY: 25,400
USD: 159.22
-
ABS Project Box, White, 290 x 200 x 124mm B2211007+ 2 X B2129407+B203100
Stock nos. 338-1087 and 338-1065 are supplied with a 74mm high case. Included are 2 large size end panels and a side panel kit, thus increasing the case height to 124mm. Meditec Cases. Ergonomic desk cases, including front and rear panels Internal screw pillars for mounting Eurocards from 100mm x 160mm to 233.4mm x 220mm Supplied with 4 moulded non-slip feet
1 products found
JPY: 34,300
USD: 215.01
-
ABS Project Box, White, 160 x 260 x 74mm B2212007+ 2 X B2116307
Stock nos. 338-1087 and 338-1065 are supplied with a 74mm high case. Included are 2 large size end panels and a side panel kit, thus increasing the case height to 124mm. Meditec Cases. Ergonomic desk cases, including front and rear panels Internal screw pillars for mounting Eurocards from 100mm x 160mm to 233.4mm x 220mm Supplied with 4 moulded non-slip feet
1 products found
JPY: 22,000
USD: 137.91
-
ABS Project Box, White, 160 x 260 x 74mm B2212007+ 2 X B2116407+B203000
Stock nos. 338-1087 and 338-1065 are supplied with a 74mm high case. Included are 2 large size end panels and a side panel kit, thus increasing the case height to 124mm. Meditec Cases. Ergonomic desk cases, including front and rear panels Internal screw pillars for mounting Eurocards from 100mm x 160mm to 233.4mm x 220mm Supplied with 4 moulded non-slip feet
1 products found
JPY: 28,700
USD: 179.90
-
OKW, ABS, Handheld Enclosure With Integral Battery Compartment, IP40 ,58 mm x 19 mm x 36 mm A9064109+A9164001
Remote Control. ABS Pocket cases with ergonomic profiles Size XS (see cases with a height of 20mm) with key ring, PCB mountable inside Size M and L (see cases with a height of 24mm and H32mm) with recess for membrane keypad Battery connectors are supplied for AAA and AA batteries, PP3 battery requires a separate connection clip (stock no. ; 279-5457 279-5457 )
1 products found
JPY: 3,440
USD: 21.56
-
OKW, ABS, Handheld Enclosure With Integral Battery Compartment, IP40 ,96 mm x 24 mm x 47 mm A9066119+A9166001
Remote Control. ABS Pocket cases with ergonomic profiles Size XS (see cases with a height of 20mm) with key ring, PCB mountable inside Size M and L (see cases with a height of 24mm and H32mm) with recess for membrane keypad Battery connectors are supplied for AAA and AA batteries, PP3 battery requires a separate connection clip (stock no. ; 279-5457 279-5457 )
1 products found
JPY: 5,460
USD: 34.23
-
OKW, ABS, Handheld Enclosure With Integral Battery Compartment, IP40 ,140 mm x 31 mm x 63 mm A9067109+A9190002
Remote Control. ABS Pocket cases with ergonomic profiles Size XS (see cases with a height of 20mm) with key ring, PCB mountable inside Size M and L (see cases with a height of 24mm and H32mm) with recess for membrane keypad Battery connectors are supplied for AAA and AA batteries, PP3 battery requires a separate connection clip (stock no. ; 279-5457 279-5457 )
1 products found
JPY: 9,370
USD: 58.74
-
OKW Comtec, Sloped Front, ABS, 200 x 150 x 71.5mm Desktop Enclosure, White A0615107
COMTEC Ergonomic Sloping Front Enclosures. The OKW COMTEC enclosure has an ergonomic sloping front making it ideal for fitting keypads. Applications include data collection terminals, communications devices, access control, security, medical, laboratory, wellness and point-of-sale systems. Modern, ergonomic keypad enclosures 10° sloping front for ease of data input Useful range of seven sizes Ideal for desktop or wall mounted electronics Version I - without battery compartment lid Version II - with battery compartment lid Screw-in battery cradles are ordered separately for VERSION II cases Easy assembly with two self-tapping screws Recess in top for a membrane keypad or label Internal mounting pillars for PCBs Flat rear section for mounting connectors and switches Made from ABS (UL 94 HB) IP40 protection Available in off-white RAL 9002 or black RAL 9005
1 products found
JPY: 7,180
USD: 45.01
-
OKW Comtec, Sloped Front, ABS, 200 x 150 x 71.5mm Desktop Enclosure, Black A0615109
COMTEC Ergonomic Sloping Front Enclosures. The OKW COMTEC enclosure has an ergonomic sloping front making it ideal for fitting keypads. Applications include data collection terminals, communications devices, access control, security, medical, laboratory, wellness and point-of-sale systems. Modern, ergonomic keypad enclosures 10° sloping front for ease of data input Useful range of seven sizes Ideal for desktop or wall mounted electronics Version I - without battery compartment lid Version II - with battery compartment lid Screw-in battery cradles are ordered separately for VERSION II cases Easy assembly with two self-tapping screws Recess in top for a membrane keypad or label Internal mounting pillars for PCBs Flat rear section for mounting connectors and switches Made from ABS (UL 94 HB) IP40 protection Available in off-white RAL 9002 or black RAL 9005
1 products found
JPY: 12,100
USD: 75.85
-
OKW Comtec, Sloped Front, ABS, 150 x 200 x 62.8mm Desktop Enclosure, White A0620107
COMTEC Ergonomic Sloping Front Enclosures. The OKW COMTEC enclosure has an ergonomic sloping front making it ideal for fitting keypads. Applications include data collection terminals, communications devices, access control, security, medical, laboratory, wellness and point-of-sale systems. Modern, ergonomic keypad enclosures 10° sloping front for ease of data input Useful range of seven sizes Ideal for desktop or wall mounted electronics Version I - without battery compartment lid Version II - with battery compartment lid Screw-in battery cradles are ordered separately for VERSION II cases Easy assembly with two self-tapping screws Recess in top for a membrane keypad or label Internal mounting pillars for PCBs Flat rear section for mounting connectors and switches Made from ABS (UL 94 HB) IP40 protection Available in off-white RAL 9002 or black RAL 9005
1 products found
JPY: 7,180
USD: 45.01
-
OKW DIATEC, ABS Wall Box, IP40, 48mm x 210 mm x 200 mm A9093107R
Diatec Contoured Enclosure. Contoured enclosure for housing wallmounted and desktop electronics Central recessed control area for a membrane keypad, touch screen or display unit Four part assembly: base, top and two snap-on side panels Base moulding has knockouts for easy wall mounting Cases can be installed on the wall without the need to remove the top panel Side panels can be locked as part of anti-tampering measures Two 1.5V AA or one 9V cell can be fitted inside the case
1 products found
JPY: 19,100
USD: 119.73
-
OKW DIATEC, ABS Wall Box, IP40, 200mm x 48 mm x 270 mm 49094107R
Diatec Contoured Enclosure. Contoured enclosure for housing wallmounted and desktop electronics Central recessed control area for a membrane keypad, touch screen or display unit Four part assembly: base, top and two snap-on side panels Base moulding has knockouts for easy wall mounting Cases can be installed on the wall without the need to remove the top panel Side panels can be locked as part of anti-tampering measures Two 1.5V AA or one 9V cell can be fitted inside the case
1 products found
JPY: 17,700
USD: 110.95
-
OKW StarCASE, ABS Enclosure, IP66, 120 x 90 x 50mm 230.090.000
EN 60529. starCASE IP66 Enclosure. StarCASE is a multipurpose range of plastic enclosures. These ergonomic enclosures are perfectly suitable for modern industrial electronics. The enclosures can be mounted on a wall, bulkhead, ceiling or machine. The enclosures can also be mounted without opening the lid which means your electronics remain protected at all times. Screw bosses are provided inside for fitting circuit boards and mounting plates. Features and Benefits. Integrated recess for membrane keypads or front plates Integrated lid support, polypropylene (PP) Full protective insulation in accordance with VDE 0100 Flame-retardant. (IP) Ingress Protection and what it means?. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. Application Information. starCASE enclosure housings are perfectly suitable for modern industrial electronics. FAQ ‘s. Can the box be used outside? Yes, starCASE Enclosures have an IP65 rating Are they mountable? Yes, they are suitable for wall mounting or portable applications What is supplied? Enclosure RAL 7035 Stainless steel lid and screws Silicone moulded seal
1 products found
JPY: 11,000
USD: 68.95
-
OKW StarCASE, ABS Enclosure, IP66, 160 x 90 x 50mm 230.092.000
EN 60529. starCASE IP66 Enclosure. StarCASE is a multipurpose range of plastic enclosures. These ergonomic enclosures are perfectly suitable for modern industrial electronics. The enclosures can be mounted on a wall, bulkhead, ceiling or machine. The enclosures can also be mounted without opening the lid which means your electronics remain protected at all times. Screw bosses are provided inside for fitting circuit boards and mounting plates. Features and Benefits. Integrated recess for membrane keypads or front plates Integrated lid support, polypropylene (PP) Full protective insulation in accordance with VDE 0100 Flame-retardant. (IP) Ingress Protection and what it means?. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. Application Information. starCASE enclosure housings are perfectly suitable for modern industrial electronics. FAQ ‘s. Can the box be used outside? Yes, starCASE Enclosures have an IP65 rating Are they mountable? Yes, they are suitable for wall mounting or portable applications What is supplied? Enclosure RAL 7035 Stainless steel lid and screws Silicone moulded seal
1 products found
JPY: 12,300
USD: 77.10
-
OKW StarCASE, ABS Enclosure, IP66, 200 x 110 x 60mm 230.112.000
EN 60529. starCASE IP66 Enclosure. StarCASE is a multipurpose range of plastic enclosures. These ergonomic enclosures are perfectly suitable for modern industrial electronics. The enclosures can be mounted on a wall, bulkhead, ceiling or machine. The enclosures can also be mounted without opening the lid which means your electronics remain protected at all times. Screw bosses are provided inside for fitting circuit boards and mounting plates. Features and Benefits. Integrated recess for membrane keypads or front plates Integrated lid support, polypropylene (PP) Full protective insulation in accordance with VDE 0100 Flame-retardant. (IP) Ingress Protection and what it means?. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. Application Information. starCASE enclosure housings are perfectly suitable for modern industrial electronics. FAQ ‘s. Can the box be used outside? Yes, starCASE Enclosures have an IP65 rating Are they mountable? Yes, they are suitable for wall mounting or portable applications What is supplied? Enclosure RAL 7035 Stainless steel lid and screws Silicone moulded seal
1 products found
JPY: 15,800
USD: 99.04
-
OKW StarCASE, ABS Enclosure, IP66, 160 x 130 x 60mm 230.130.000
EN 60529. starCASE IP66 Enclosure. StarCASE is a multipurpose range of plastic enclosures. These ergonomic enclosures are perfectly suitable for modern industrial electronics. The enclosures can be mounted on a wall, bulkhead, ceiling or machine. The enclosures can also be mounted without opening the lid which means your electronics remain protected at all times. Screw bosses are provided inside for fitting circuit boards and mounting plates. Features and Benefits. Integrated recess for membrane keypads or front plates Integrated lid support, polypropylene (PP) Full protective insulation in accordance with VDE 0100 Flame-retardant. (IP) Ingress Protection and what it means?. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. Application Information. starCASE enclosure housings are perfectly suitable for modern industrial electronics. FAQ ‘s. Can the box be used outside? Yes, starCASE Enclosures have an IP65 rating Are they mountable? Yes, they are suitable for wall mounting or portable applications What is supplied? Enclosure RAL 7035 Stainless steel lid and screws Silicone moulded seal
1 products found
JPY: 13,500
USD: 84.62
-
OKW StarCASE, ABS Enclosure, IP66, 280 x 170 x 60mm 230.172.000
EN 60529. starCASE IP66 Enclosure. StarCASE is a multipurpose range of plastic enclosures. These ergonomic enclosures are perfectly suitable for modern industrial electronics. The enclosures can be mounted on a wall, bulkhead, ceiling or machine. The enclosures can also be mounted without opening the lid which means your electronics remain protected at all times. Screw bosses are provided inside for fitting circuit boards and mounting plates. Features and Benefits. Integrated recess for membrane keypads or front plates Integrated lid support, polypropylene (PP) Full protective insulation in accordance with VDE 0100 Flame-retardant. (IP) Ingress Protection and what it means?. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. Application Information. starCASE enclosure housings are perfectly suitable for modern industrial electronics. FAQ ‘s. Can the box be used outside? Yes, starCASE Enclosures have an IP65 rating Are they mountable? Yes, they are suitable for wall mounting or portable applications What is supplied? Enclosure RAL 7035 Stainless steel lid and screws Silicone moulded seal
1 products found
JPY: 25,100
USD: 157.34
-
OKW NET-BOX, Polycarbonate Enclosure, IP65, 220 x 220 x 50.5mm B3222101 + B3322151
anti-tamper Torx T10 assembly screws and IP65 sealing kit. NET-BOX Wall Mounted Enclosure. The OKW NET-BOX is a sleek new range of wall mounted enclosures for data and control electronics. These advanced contoured enclosures consist of a base section, front cover and lid. They are assembled using Torx T10 security screws. A unique feature of these ABS enclosures is the inset connector mounting face. This allows unsightly connections and cables to be hidden under the front lid of the enclosure for a professional installation. It is ideal for central control units, data acquisition systems, data systems engineering, measuring and control technology, supervision terminals and access control, medical and wellness technology. Stylish curved top section which can be fitted with LEDs, displays and switches Inset panel on the underside provides discreet mounting for connections (RJ45, RS232, HDMI, USB, power inlets, etc) Connectors and cables are hidden under the front lid Simple 3 part assembly - bottom part, front cover and front lid No visible fixing screws on the front, just two on the underside of the lid Screw pillars in the bottom part for mounting PCBs and assemblies 3 point wall mounting system, the main electronics section stays closed, only the front lid has to be refitted after installation Moulded in flame retardant material and can be sealed to IP65 for outdoor applications Top cover and lid are light grey, RAL 7035
1 products found
JPY: 24,200
USD: 151.70
-
OKW NET-BOX, Polycarbonate Enclosure, IP65, 140 x 140 x 46.5mm B3214101 + B3314151
anti-tamper Torx T10 assembly screws and IP65 sealing kit. NET-BOX Wall Mounted Enclosure. The OKW NET-BOX is a sleek new range of wall mounted enclosures for data and control electronics. These advanced contoured enclosures consist of a base section, front cover and lid. They are assembled using Torx T10 security screws. A unique feature of these ABS enclosures is the inset connector mounting face. This allows unsightly connections and cables to be hidden under the front lid of the enclosure for a professional installation. It is ideal for central control units, data acquisition systems, data systems engineering, measuring and control technology, supervision terminals and access control, medical and wellness technology. Stylish curved top section which can be fitted with LEDs, displays and switches Inset panel on the underside provides discreet mounting for connections (RJ45, RS232, HDMI, USB, power inlets, etc) Connectors and cables are hidden under the front lid Simple 3 part assembly - bottom part, front cover and front lid No visible fixing screws on the front, just two on the underside of the lid Screw pillars in the bottom part for mounting PCBs and assemblies 3 point wall mounting system, the main electronics section stays closed, only the front lid has to be refitted after installation Moulded in flame retardant material and can be sealed to IP65 for outdoor applications Top cover and lid are light grey, RAL 7035
1 products found
JPY: 14,800
USD: 92.77
-
OKW Comtec, Sloped Front, ABS, 120 x 150 x 63mm Desktop Enclosure, Black A0612109
COMTEC Ergonomic Sloping Front Enclosures. The OKW COMTEC enclosure has an ergonomic sloping front making it ideal for fitting keypads. Applications include data collection terminals, communications devices, access control, security, medical, laboratory, wellness and point-of-sale systems. Modern, ergonomic keypad enclosures 10° sloping front for ease of data input Useful range of seven sizes Ideal for desktop or wall mounted electronics Version I - without battery compartment lid Version II - with battery compartment lid Screw-in battery cradles are ordered separately for VERSION II cases Easy assembly with two self-tapping screws Recess in top for a membrane keypad or label Internal mounting pillars for PCBs Flat rear section for mounting connectors and switches Made from ABS (UL 94 HB) IP40 protection Available in off-white RAL 9002 or black RAL 9005
1 products found
JPY: 12,200
USD: 76.48
-
OKW Comtec, Sloped Front, ABS, 290 x 200 x 76mm Desktop Enclosure, Black A0629109
COMTEC Ergonomic Sloping Front Enclosures. The OKW COMTEC enclosure has an ergonomic sloping front making it ideal for fitting keypads. Applications include data collection terminals, communications devices, access control, security, medical, laboratory, wellness and point-of-sale systems. Modern, ergonomic keypad enclosures 10° sloping front for ease of data input Useful range of seven sizes Ideal for desktop or wall mounted electronics Version I - without battery compartment lid Version II - with battery compartment lid Screw-in battery cradles are ordered separately for VERSION II cases Easy assembly with two self-tapping screws Recess in top for a membrane keypad or label Internal mounting pillars for PCBs Flat rear section for mounting connectors and switches Made from ABS (UL 94 HB) IP40 protection Available in off-white RAL 9002 or black RAL 9005
1 products found
JPY: 25,100
USD: 157.34
-
OKW Comtec, Sloped Front, ABS, 290 x 200 x 76mm Desktop Enclosure, White A0629107
COMTEC Ergonomic Sloping Front Enclosures. The OKW COMTEC enclosure has an ergonomic sloping front making it ideal for fitting keypads. Applications include data collection terminals, communications devices, access control, security, medical, laboratory, wellness and point-of-sale systems. Modern, ergonomic keypad enclosures 10° sloping front for ease of data input Useful range of seven sizes Ideal for desktop or wall mounted electronics Version I - without battery compartment lid Version II - with battery compartment lid Screw-in battery cradles are ordered separately for VERSION II cases Easy assembly with two self-tapping screws Recess in top for a membrane keypad or label Internal mounting pillars for PCBs Flat rear section for mounting connectors and switches Made from ABS (UL 94 HB) IP40 protection Available in off-white RAL 9002 or black RAL 9005
1 products found
JPY: 24,800
USD: 155.46
-
OKW Conform, Die Cast Aluminium Enclosure, IP66, Shielded, 268 x 168 x 60mm 111.162.000
RFI Shielded Boxes. This RS Pro Aluminium Enclosure is a highly versatile and economic enclosure that has in-built shielding. The pre-cast lid and base has tooth system, which ensures continuous contact. The threaded screw bosses are provided insude for fitting types of boards to be fitted. An IP66 seal, ensures this enclosure is dust proof and weather resistant.. Features and Benefits. Baked enamel heavy-duty boxes with overlapping tongue and groove to provide a high level of RFI screening Neoprene sealing gasket provides protection to IP66 Internal mounts for PCBs, earth tags etc (supplied with copper plated screws) Lid to box fixing screws and mounting holes are outside gasket area Temperature range of -40 to +80°C Body colour grey (RAL7032). Typical Applications. Test and Measurement Instrumentation. Medical Tools. Transportation Equipment. Industrial Controls. Lighting Applications. What is Supplied?. This enclosure comes complete with captive screws
1 products found
JPY: 34,600
USD: 216.89
-
OKW Toptec, ABS Enclosure, IP40, 123 x 68 x 45mm B1050365
Clip Together. PCB mounting bosses in base and lid Recessed top for keypads, displays etc. Wall mounting brackets available separately
1 products found
JPY: 6,370
USD: 39.93
-
OKW Toptec, ABS Enclosure, IP40, 154 x 84 x 56mm B1060365
Clip Together. PCB mounting bosses in base and lid Recessed top for keypads, displays etc. Wall mounting brackets available separately
1 products found
JPY: 7,170
USD: 44.95
-
OKW Toptec, ABS Enclosure, IP40, 194 x 115 x 68mm B1070365
Clip Together. PCB mounting bosses in base and lid Recessed top for keypads, displays etc. Wall mounting brackets available separately
1 products found
JPY: 9,580
USD: 60.05
-
OKW Toptec, ABS Enclosure, IP40, 154 x 84 x 56mm B1060465
Clip Together with Vents. PCB mounting bosses in base and lid Recessed top for keypads, displays etc. Wall mounting brackets available separately
1 products found
JPY: 7,170
USD: 44.95
-
OKW Wall Mount for use with TOPTEC 154 F/H B1360028
Clip Together. PCB mounting bosses in base and lid Recessed top for keypads, displays etc. Wall mounting brackets available separately
1 products found
JPY: 1,480
USD: 9.28
-
OKW Comtec, Sloped Front, ABS, 150 x 200 x 62.8mm Desktop Enclosure, Black A0620109
COMTEC Ergonomic Sloping Front Enclosures. The OKW COMTEC enclosure has an ergonomic sloping front making it ideal for fitting keypads. Applications include data collection terminals, communications devices, access control, security, medical, laboratory, wellness and point-of-sale systems. Modern, ergonomic keypad enclosures 10° sloping front for ease of data input Useful range of seven sizes Ideal for desktop or wall mounted electronics Version I - without battery compartment lid Version II - with battery compartment lid Screw-in battery cradles are ordered separately for VERSION II cases Easy assembly with two self-tapping screws Recess in top for a membrane keypad or label Internal mounting pillars for PCBs Flat rear section for mounting connectors and switches Made from ABS (UL 94 HB) IP40 protection Available in off-white RAL 9002 or black RAL 9005
1 products found
JPY: 12,500
USD: 78.36
-
OKW, ABS, Art Case With Integral Battery Compartment ,110 mm x 63 mm x 110 mm B5011407
Art Cases. Round 110mm diameter ABS enclosure suitable for hand held, table top and wall mounting Colour; off-white (RAL9002) Available with domed top or flat recessed top for fitting a Ø72 membrane keypad or product label A battery compartment lid or extension base is supplied and fitted to the bottom part Internal screw pillars for mounting PCBs Easy assembly with bayonet fitting and single fixing screw. Battery compartment Kit for 2 x 1.5V AAA cells PCB mounting screws for the optional screw fixing of the extension base or battery compartment lid
1 products found
JPY: 5,520
USD: 34.60
-
OKW Instrumet 3U 19-Inch Floor Cabinet 157.26 x 516.25 x 350mm M6019305
Instrumet 19in. Case. A stylish 19" instrument case designed for mounting 3U subracks, chassis or front panels. The desktop version of these instrument cases have ABS side handles whereas the portable version has a tilt/swivel carry handle. Manufactured in aluminium and supplied fully assembled. Fully assembled 19in. case available as a desktop or portable version Front / rear bezel in mid-grey (RAL 7040) Top cover, base and rear panel in light grey (RAL 7035) Chassis supports 4 ABS tilt feet
1 products found
JPY: 59,200
USD: 371.09
